Same tough decision I'm having.

My SOCOM (sorry for marvelous picture quality)

http://i164.photobucket.com/albums/u..._socom_001.jpg

With silencer

http://i164.photobucket.com/albums/u...com_sd_001.jpg

I wish I knew a little more about it... I've tried reaserching... but nothing really popped out at me.

With the V trigger You're able to use the PDI Vaccume Pistons or whatever they're called... From what I've read I think this allows for an easier bolt pull and push back (The Upgraded VSR-10 I used's bolt push was actually significantly harder than the pull)

But I'm not sure.. I'm a VSR-10 noob.

I agree! Marksman you win ( and I tought my M24 kicked ass :( )

Fuck looks, what one does with it for the win!!!! ;) And yes, his rifle is very nice.

were do you ppl get those scopes!

Sure as fuck isn't Walmart, kid.

well whats your budget for a scope?

cheers

you would think a kid whos a qualified airsoft sniper and whos uncle is a cf sniper would know where to get a scope :rolleyes:

nice sniper fox

lol...


Well, my complete and not so complete all at the same time Left Handed M24. Might not look as impressive as said M82A1.
http://i114.photobucket.com/albums/n...Picture302.jpg

Mostly tweaking and a ghillie wrap left to do to it, just havn't had the time!

And it's side kick... ((silencer and optic to be painted))

http://i114.photobucket.com/albums/n...Picture334.jpg

i'm starting at airsoft and bought this Warrior L96 (Well L96). for starting at think it is fairly good I must say. I didn't do any paintjob yet but i think of doing one when I'll have time.

didnt expect to see that here

very nice g36 qlong

http://img174.imageshack.us/img174/5...0006zl3.th.jpg

** MK12 mod 0 **
- Metal body G&P black water
- mech box Hurricane reinforced
- Systema gear set reinforced
- systema metal bushing
- Spring guide bearing Systema
- Spring M120S Systema
- Systema Air-seal nozzle
- Prometheus double torque helical gear set
- Piston G & P renforcie
- Tête de piston TM modifiée (ventilée)
- Star crane stock, upgraded buffer tube,
- dean conector
- King Arms Target Grip Ver. II
- TM EG-1000
- Madbull 6.03mm Inner barrel 510mm


** G&G SR 25 **
-Description N/A
(Under constrution)


** Maruzen L96 **
-2 PSS springs (one 170 shoots about 550, one 190% shoots around 600)
-King Arms Zero Trigger
-Laylax 7&9mm Spring Guide
-PSS2 3 Element Piston
-PSS2 Cylinder Head
-PDI Acceleration Piston
-Maruzen Bipod

No where near done, but after a couple hours or so I've gotten a good start on the wrap for my M700.

http://i114.photobucket.com/albums/n...Picture343.jpg
http://i114.photobucket.com/albums/n...Picture342.jpg


I had done the more tradition "ghillie" using nets before on my previous sniper rifles, but the problem with them was always foliage getting in the way of the lens. With not being able to see my target I couldn't see what fucking good it was to be PERFECTLY hidden, other than it does keep ya alive while you can't kill the other. So I opted to go this route of just wrapping very long strips of burlap. I want to get some more browns in there to break it up some more and blend better with my ghillie, but I've run out of brown it seems. The benifit of going this more sleek route is noticeable the moment I lift the rifle to my shoulder because I do not have to fret with the wrap at all to get a clear crisp picture. :D

systema ptw
http://i234.photobucket.com/albums/e...604/photo3.jpg

pdi/fortress VSR(old pics, has been painted)
http://i234.photobucket.com/albums/e...IMG_1924-1.jpg

laylax aps pss2
http://i234.photobucket.com/albums/e...4/IMG_1902.jpg

Old pic but nothing has changed except the battery is in a PEQ, put a harris bipod on and I have a different scope mount.

http://i93.photobucket.com/albums/l7...z/S2500059.jpg

Also got an APS/2 that i will take a pic of eventually.

I really should get around to taking some 'glamor' shots of the PSG-50 one of these days.

http://photos-b.ak.facebook.com/phot...88897_2571.jpg

http://photos-c.ak.facebook.com/phot...88898_2928.jpg


http://photos-d.ak.facebook.com/phot...88899_3211.jpg


There we go.

wow I dont think I've ever seen that without something dildo attached to it... it's actually damn sexy =)

wow, very nice work aqua.

Rex

Give me a day to dildo it up.

http://colinsun.com/Pictures/Airsoft/Rifle.jpg

My old rifle man do I miss it now. :( Ahh well it didn't suit my playing style anyway.

What is it? I'm not good with bolt's especially when they're covered by a rifle ghille.

Oh sorry, it was a Maruzen APS Type 96.

Ahh!!!!

ok, i know ive been a snobby person, but please dont get mad at me for asking this. what is the best position to keep my VSR-10 in. should the bolt be pulled back and locked(dose that relax the spring?) or should it be un cocked?

thx

The spring should be relaxed, as in not cocked. If you store the rifle cocked, you leave too much pressure on the internal, not to mention that it's a safety hazard.

I always take the spring and guide from the cylender and store it seperated after each time i game my APS2. Even not cocked, the spring is still under pressure.

Now for some pics:
http://i4.photobucket.com/albums/y11...L/0c41ece1.jpg
The way it used to be

http://i4.photobucket.com/albums/y11...L/DSC00443.jpg
Tan was the base colour, I sold my first scope and bought this one, Simmons

http://i4.photobucket.com/albums/y11...L/25bde55f.jpg
All ghillied up

http://i4.photobucket.com/albums/y11...riffondown.jpg
In action

http://i4.photobucket.com/albums/y11...s/db595d98.jpg
Enroute to a undesclosed location

http://i4.photobucket.com/albums/y11...IJuly02062.jpg
Current paintjob, not the best, but it works for now. Any volunteers to do a custom paintjob?

Any ressemblance???

http://www.antique-dog-pictures.com/p/h-lhassaapsos.jpg

Joking, its just that I dont like over burlaped rifles.

hahahahaha

thanks FOX, i needed that info

http://www.flickr.com/photos/28210923@N04/2657876037/

http://www.flickr.com/photos/2821092...n/photostream/

its my first paint try ever, but it works pretty well...

Slightly off topic but fits with painting.. does anyone know what the name is of the green colour the real AIAW is painted?

Nice paintjob. But Holly high scope ring batman!! Do you have trouble sighting in the scope or looking in it with those rings?

ya, sometimes. im trying to find lower ones, but havent hade any luck yet... thanks for the comment on the paint job to :D the CADPAT on your M700 is amaizing!

oh ya, and what dose AIAW mean, sorry, im a noob to a TON of you people.

http://i18.photobucket.com/albums/b1...F/IMG_1766.jpg

Does it need an explanation?

Er....yeah. Anyways, I believe he is refering to the Accuracy International Arctic Warfare (coulld be wrong though)...the AI1W L96. Unfortunately, I do not know the specific colour that would match it.

SHA DO

thought your uncle was a cf sniper:rolleyes:

also potato i dont think i wanna know...

OMG NATHAN. LMAO!!

Yes.

A lot.

Oy! That needs A Good Explanation

Amos' leopard print bed spread strikes again!
Have you shown your girlfriend that picture yet?

She's the one that took it, hahahaha.

Correct, that's what I was talking about.

Is that her underwear hanging from your rifle? :D

what are u doing? hunting lady cougars?

i think they took the term gun fuckery a little too serious

Nope, It's a leopard print shirt!

my lord amos i no longer know you...

Lol.

But you're the one that taught me how to be such a 1337 sniper/spotter.

i still need a new mechbox, inner barrel, king arms metal furniture set, and g27 pistol grip. oh and paint haha. after a year of getting random bits together. its almost done tho. cant wait to game it.


http://i61.photobucket.com/albums/h4...20guns/spr.jpg
http://i61.photobucket.com/albums/h4...0guns/spr2.jpg

2 words... HOLLY SHIT!!!

the vert grip doesent look right not really criticism of nothing just personal preference of mine (i dont like vert grips very much) but if it works for you thats all that matters

beautiful rifle mate none the less:)

did some painting on My m24 a while back.
(Just ignore the single ring, I have two on there, now)
Enjoy :
http://i20.photobucket.com/albums/b2...f/IMG_4576.jpg
http://i20.photobucket.com/albums/b2...f/IMG_4575.jpg
http://i20.photobucket.com/albums/b2...f/IMG_4574.jpg
http://i20.photobucket.com/albums/b2...f/IMG_4577.jpg
http://i20.photobucket.com/albums/b2...f/IMG_4579.jpg

Thats for Detail... And heres for effectiveness:
http://i20.photobucket.com/albums/b2...f/IMG_4600.jpg
http://i20.photobucket.com/albums/b2...f/IMG_4601.jpg
________
INFANT ZOLOFT

Wow nice painting, Thatotherguy . Also, that black scope ring really stands out, why not paint that too?

Its got two new rings which are painted, dont worry. This will prolly be repainted around mid august. I didnt use my clearcoat properly, its getting really scratched up :(. Works like a charm though, i've had people mistake it for a fallen tree branch before. Its doing its job quite well.
________
Wellbutrin Settlements

I don't have any recent pictures, just repainted it flat black (again).

I am not sure yet if I want to camoed or just black:

errr. nevermind... I don't have any picture worth it.
I will take some fresh ones when the sun rises later...

Gun is a Well G22 changed to spring with PDI parts (Cylinder, Piston, Spring guide, Hop-up chamber), DeepFire SS tightbore and some LayLax springs.

Sporting a Bushnell hunting scope... still one of my favorite scope. 75$ on special at the big "W".

Nicely done

kinda looks like water reflection. like on the sides of a fishing boat

My M16 AEG sniper. 400 FPS and I have a 6.03 tightbore barrel in there.

http://i195.photobucket.com/albums/z...3/Hpim0318.jpg

update on my barret .50 the project is now finish some minor adjustement need to be done on the air nozzle with the hop-up unit then I will be able to do some accuracy test


Hurricane M82A1 / A3 Barret ( new version of the old M82A1 )
M3 Scope
KA scope mount
KA Reinforced Selector Lever
KA M16 VN mag 85rds
Hurricane M4 Metal Hop-up
Guarder Large pistol grip
Prometheus Hard type Hop-up
Inturder shop 6.03 650mm tight bore barrel

Systema Complete Mecha-Box & Motor Magnum Set:
-M170 Spring
-Reinforced Gearbox with 7mm Bearing
-Teflon Cylinder Set
-All Helical Gear Set Super Torque
-Low Resistance Switch Assembly
-Magnum Motor Long Type
-Selector Plate / Tappet Plate / etc.
Sanyo 10.8v Large type battery 3600mah

I think you win the prize for longest airsoft rifle in Canada. :|

What's the overall length on that beauty?

*Drool

i just came in my pants

next time you come to our game marksman you gotta bring it or else you cant play! How much did it cost I say about 3000 to 3500$ am I right?! If only I could put my hand ion the VFC one :(

You better bring that beauty tomorrow!!!! It's full of mighty win

length is 58 inchs

ya cost me around 3000$ with all the parts,

sure Vince the barret will be at the field tomorrow but not sure if it will be ready to play due to the air nozzle adjustment and not enought time to work on it with the game tomorrow lots of things to do today

Ranger Green IIRC.

Here's my newest baby still isnt finished still need to bring her up to the 400+ fps club, semi auto only! Need back up rion sight, scope extender, SPR grip, butlers flip up covers and a fuctionnal G&P ANpeq2 to complete the look a solid paintjob and even maybe a magpul PRS stock.
http://i266.photobucket.com/albums/i...r/DSCF0006.jpg

http://i266.photobucket.com/albums/i...r/DSCF0018.jpg

PS, keep you retarded comment such as: He man your gun isnt on safe.

http://i33.photobucket.com/albums/d9...9/IMG_2000.jpg

Eye relief is horrible, you need to get close to it to see right. I have it as far back as I can get it.

i think those spr's look bad ass
does anyone have a take down version like you see in the movies? like they have it in the case and then put it together when they get there

well i guess you could disconnect the upper and lower reciever?

mine the silencer comes off and then the upper and then it could fit in them hitman style cases speaking of which ill have pictures of mine up in a few

I can with mine, not technically a mod SPR, but SPR non the less.. just check out my thread and ull see why. Can seperate the front and the back with pull ofa pin, unscrew the barrel, collapse stock, ect.

I dont have the pelican case yet and it isnt an SPR but here we go....

http://i266.photobucket.com/albums/i...r/DSCF0012.jpg

same idea is that a sr 25

Actually its a GR-25 from G&G... Once painted no one will know ;) (because I couldnt get my hands off a G&P which bruce didnt want to sell to me :p )

Oh man, you guys and your SPR's, making me jealous, can't wait till I get mine finished with accessories. :p
Takes time and money.. boo

guys thats really cool. thats like exactly what i had in mind.

http://i67.photobucket.com/albums/h3...2/IMG00471.jpg
heres mine its a d boys spr mod 0 its pretty much all metal, it has a replaced spr flash hider an form g and p with their kac spr silencer the trades are on the outher side but i dont have my good camera so high rez will come tomor also the aimpoint is just their until i get my new scope, hers the spec's
-mad bull tight bore m16 length barrel
-systeam one peice hopup
-shooting 405 consistinly hoping spring selttles out a bit more
- real steel kac rail covers
WHATS going on it
-4000 mha batery 8.4v (coustom large type to fit in the stock)
-g and p knights sniper stock(eta 1 week)
-kac m3 replica scope holder(2 weeks)
-m3 scope(eta 2 weeks)
-vn mags with mag pulls(10 ka metal mid caps)

looking good jes

my rifle

VSR 10
 

this is my VSR 10 Clone im getting a SD96 other wise known as a worrior L96 thats what ill paint cadpat its a big job

Are you joking?

the VSR-10 has the 2nd most upgrades available for it next to the APS2...

nice paint element

well i just havent been able to get my hands on any sorry

thanks
:) i have the new paint job up

how did you paint that??

I'd say its the Most at the moment actually, since First Factory has cut a lot of its part manufacturing for the APS2 lines. Sure there's PDI, but they make equally as much VSR-10 stuff as they do APS2, though I'd say right now they make a substantial amount of the remaining focus on the Type-96 models. That's not to say supplies still have numbers here with retailers abroad, but I'd say the APS2 is sort of like the oil industry, dragging in money with the end of the pipes in sight. Anyway, the super gorgeous UPS delivery girl is about to come to my office and I think I'm going to go enjoy about the only thing there is to with UPS...

EDIT: So a follow up to the off topicness... UPS girls don't like it when you sign "Your name is? :D now for her to come back again and sign "Dinner at 8". :D

Hahaha!
She must be tired of giving, give her a package when she come.

vsr
 

all i did was got some sheet papper and cut out digital stensles and painted it its simple yet painstaking

http://i20.photobucket.com/albums/b2...Picture027.jpghttp://i20.photobucket.com/albums/b2...Picture023.jpghttp://i20.photobucket.com/albums/b2...Picture022.jpg

My CA M24. just finished repainting it, Giving it a good two weeks to cure and then i'm gonna put on a good layer of dullcoat so it doesnt scratch.
________
Expert insurance

i get it was done with a stencel but how did you paint the outher colors with out messing up the base or did you use a stencel for a base then move it sot the outher was covers im kinda confused this is problay why id go for the cammo tape lol

Trust me, it'll still scratch, but the clear coat will make it waterproof and also brighten up the colours more. Wish I had a pic of my CA M24 after I painted it 5 years ago, it was stunning!

Damn, hm. Well, i'm aiming to make it a bit more scratch resistant than my last paintjob... Last time, my paint simply peeled off from the humidity. Not fun
________
house wives Webcam

Would that statement also apply to clones? spefically the AGM?

Sort of... but with clones you more often than not run into fitment and tolerance issues.

If you want a top tier preforming sniper rifle... Go name-brand or go home.

Buy TM, or atleast the JG-BAR 10. AGM or WELL has fitment issues.