Airsoft Canada
Page 2 of 7 1 2 34567
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   Realsword is to Norinco as Izmash is to Izmash (https://airsoftcanada.com/showthread.php?t=142957)

Shifty-C July 15th, 2012 13:12
Quote:
Originally Posted by Latvian291 (Post 1678907)
Realsword doesn't make an AK-74.. that's part of the problem. No really nice ones, to my knowledge, exist yet.
Quote:
Originally Posted by Con3jo (Post 1678963)
Unfortunately no, or any 100-series AK for that matter. Otherwise, if they did I would have those instead. :(
YES, exactly, it is hard to find a really nice ak74. The classic army's are about as good as it gets for aeg's and i think they are discontinued actually.

Im looking forward to the release, Hopefully with lots of steel parts :)
And an AK-105 would be awesome.
the trades are a nice bonus too
They dont need to try to re invent the wheel with internals or slim grips.

just needs to be a bit better than cyma (not that difficult) and im sold.

SuperCriollo July 15th, 2012 22:28
Fuck the AK 74, I want this piece of ugly!

http://www.operatorchan.org/k/src/134090251789.jpg


One can dream...

ViR July 15th, 2012 22:37
Quote:
Originally Posted by SuperCriollo (Post 1679176)
Fuck the AK 74, I want this piece of ugly!

http://www.operatorchan.org/k/src/134090251789.jpg


One can dream...
I was really enjoying this thread, and then I saw that ^^ and almost puked..

ViR July 15th, 2012 22:38
Quote:
Originally Posted by Brian McIlmoyle (Post 1678364)
sure hope they don't use real receivers
Yea, gotta read up on that.. Not sure about Russian laws and real recievers..

Curo July 15th, 2012 22:48
Quote:
Originally Posted by SuperCriollo (Post 1679176)
Fuck the AK 74, I want this piece of ugly!

http://www.operatorchan.org/k/src/134090251789.jpg


One can dream...
I agree that would awesome, buy in heartbeat.

Styrak July 16th, 2012 02:01
Quote:
Originally Posted by ViR (Post 1679184)
Yea, gotta read up on that.. Not sure about Russian laws and real recievers..
Pretty sure he was worried about Canadian law.

Yuu July 16th, 2012 20:16
screw that AK12 AEK-971 or AN94 PLEASE!

http://static.ogc.hu/images/content/.../AEK-971-1.jpg

SuperCriollo July 16th, 2012 22:27
Hey, it seems Izhmash already manufactures a "dummy" AK74. Maybe they are gonna use it as the base for their airsoft guns.

http://www.izhmash.ru/eng/product/mmg.shtml

ViR July 16th, 2012 23:30
Quote:
Originally Posted by Styrak (Post 1679240)
Pretty sure he was worried about Canadian law.
Yea, I know. I was thinking if its even allowed in Russia.. If not, then for sure we would have no problems here in Canada.

Shifty-C July 17th, 2012 09:38
Quote:
Originally Posted by Yuu (Post 1679528)
screw that AK12 AEK-971 or AN94 PLEASE!

http://static.ogc.hu/images/content/.../AEK-971-1.jpg
I wouldnt mind those, we need something a little different. And the receiver doesnt look like it was crudely beatin into shape by a small child with a mallet and a piece of clay. as does the other one mentioned.

Styrak July 17th, 2012 12:32
Quote:
Originally Posted by ViR (Post 1679622)
Yea, I know. I was thinking if its even allowed in Russia.. If not, then for sure we would have no problems here in Canada.
We would have all the problems in Canada if that were the case.

Latvian291 July 18th, 2012 05:17
Izmash did use real receivers for their BB Makarov and Tokarev guns IIRC, although I don't think they had any trouble with Canadian law for some reason. Perhaps because they were re-manufactured at the factory into BB frames and no one knew about it really.

Polyshot July 25th, 2012 03:05
Quote:
Forged barrel caliber 6.03 mm manufactured using technologies similar to those for which the samples are fighting AK
Is that means that this will not have a inner/outer barrel?

Polyshot July 25th, 2012 03:24
Quote:
Originally Posted by Latvian291 (Post 1680148)
Izmash did use real receivers for their BB Makarov and Tokarev guns IIRC, although I don't think they had any trouble with Canadian law for some reason. Perhaps because they were re-manufactured at the factory into BB frames and no one knew about it really.
Baikal, NOT Izhmash, is the one who produce the Makarov(both real steel and Co2 version), as well as converting surplus Tokarev's, and Pa Pa Sha's(yes you read me right(using Drozd internals): PPSH shooting (пневматичесРий ППШ) MP-562k - YouTube) into CO2 bb guns.

It should be noticed that this is not Izhmash's first effort into the realm of airsoft: One version of their famous Yunker series of CO2 rifles(which are essentially the CO2 version of their AK-74 series), fires 6mm airsoft BBs instead of the usual 4.5mm steel BB's:

http://www.izhmash.ru/eng/product/yunker5.shtml

YkudzA September 4th, 2012 06:12
AK74M AIR demo 3 - YouTube


All times are GMT -4. The time now is 16:25.
Page 2 of 7 1 2 34567
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.