buiding my own gun having problems.
 

:salute: :hammer: I have been trying to figure out how the trigger assembly and cut-off lever work can inyone tell me/ give me a diagram.

I have been trying to build my own airsoft gun from the parts of others and i am having some problems. I would really like to be able to switch between semi-auto and auto but i can't get the wiring and trigger assembly to work right. any ideas?

I am using a TM V2 Mechbox that has most of the right parts, outside of that i've done pretty well with just mixing and matching parts.
I was trying toupgrade the wiring to incorporate for a better motor, when i screwd up the trigger assembly.
I treid to fix it mysef and now it's completely taken apart.

I was looking at airsoftretreat.com where i found an article about taking apart mechboxes(to try to fix it) which specificly warned me not to take apart the trigger assembly on a V2 mechbox.
http://www.airsoftretreat.com/featu.../mechbox_guide/

It's a new Tokyo Marui MP7A1. The trigger assembly is in quite a few pieces but i know i have all of them.

Does anyone just have, or know were i can get a diagram or something that shows how to put a trigger assembly together/how it works. doesn't even have to be for the right mechbox, just so i can get an idea. :hammer: :snipe:

desert eagle blowback pistol; upgrades
 

I recently bought a brand new desert eagle blowback pistol off ebay and am wondering what upgrades i should try.

Look airsoft sites, there may be high end valve upgrades for it. Metal slides for Desert eagle, if there is any, are probably real pricey. Have a look around websites like www.wgcshop.com or www.redwolfairsoft.com. They should have something for the desert Eagle.

Took some time to help you out, here is a reinforced hammer for your Deagle http://www.wgcshop.com/WGC_Shop/images/km_tm021de.jpg
It is made buy KM

KM stainless valve knocker
http://www.wgcshop.com/WGC_Shop/images/km_tm08den.jpg

Guarder enhanced feeding muzzle
http://www.wgcshop.com/WGC_Shop/images/gd_pt_mu04.jpg

Nine Ball ahmmer spring
http://www.wgcshop.com/WGC_Shop/images/nb_pt_dehs.jpg

Proud enhanced recoil spring
http://www.wgcshop.com/WGC_Shop/imag..._acc_pis18.jpg

Zeke metal Frame *it is paint white due to japanese gun bans, you will need paint remover to get the metal color*
http://www.wgcshop.com/WGC_Shop/imag...sl_tmde5mf.jpg

Zeke Metal Slide
http://www.wgcshop.com/WGC_Shop/imag...sl_tmde5ms.jpg

I just searched WGCshop for all this, theyhave lots of goodies for your Desert eagle, these are njust some slected few i found. Just type in Desert Eagle in the wuick search, it will pop up pretty much everything for Tm and Digicon Desert Eagles.

Thanks

Buildin my own airsoft gun; having problems
 

I have been trying to build my own airsoft gun from the parts of others and i am having some problems. I would really like to be able to switch between semi-auto and auto but i can't get the wiring and trigger assembly to work right. any ideas? :hammer:

I am using a TM V2 Mechbox that has most of the right parts, outside of that i've done pretty well with just mixing and matching parts.
I was trying toupgrade the wiring to incorporate for a better motor, when i screwd up the trigger assembly.
I treid to fix it mysef and now it's completely taken apart.

I was looking at airsoftretreat.com where i found an article about taking apart mechboxes(to try to fix it) which specificly warned me not to take apart the trigger assembly on a V2 mechbox.
http://www.airsoftretreat.com/featu.../mechbox_guide/

Trigger assembly took it apart cant get it back together
 

I took apart the trigger assemblies on a couple of my guns, as a pat of trying to build my own gun, the only problem is i can't get them back together. Any Ideas? :???:

Can you provide more detail on the guns? How are they not going back together? 100% sure you've all the parts?

no problem.

you could just post in the Doctor's Corner. Maybe some will think you're an idiot trying to make an AEG from nuts but hey , I think it takes a lot of guts to put money in a project like that so I can't blame you for trying :salute:

It's a new Tokyo Marui MP7A1. it's in quite a few pieces but i know i have all of them

I'll try that.

Building an aeg from nuts and bults because i don't wan't to destroy any of my existing guns and end up with half a gun laying around somewhere.

Were can you get better wire to upgrade your guns
 

I want to put some better wire in my guns what kind of wire should i get and were do i get it

If anyone else has any ideas please respond

You'll need to give a hell of alot more info if you need help. It's like saying "I'm trying to build a car from parts, HELP". Nobody knows what exactly you're doing, what problems you're encountering and what you need to do to fix it up right.

Just be very specific when you post here, or you won't get the help you need.