Airsoft Canada - View Single Post - WETTI/AWSS - M4/SCAR/HK416

BIG · January 14th, 2010, 16:26

Also...

My bolt catch won't stay in place when I remove the lower from the upper receiver. There is nothing to keep it in place. Do you guys have the same problem? I'm looking at RAtech videos on youtube and you can see the guy handling the lower without the bolt catch falling from it's place. is it supposed to clip in place or what?

Another thing: I removed the trigger assembly and inspected it. There is no oil or grease anywhere in this assembly. It was very very dry. I read about the silicone spray to lube the O-ring when you get it but the trigger require grease also!!!

Thanks.

January 14th, 2010, 16:26	#188
BIG Trader rating Join Date: Feb 2006 Location: Québec, canada	Also... My bolt catch won't stay in place when I remove the lower from the upper receiver. There is nothing to keep it in place. Do you guys have the same problem? I'm looking at RAtech videos on youtube and you can see the guy handling the lower without the bolt catch falling from it's place. is it supposed to clip in place or what? Another thing: I removed the trigger assembly and inspected it. There is no oil or grease anywhere in this assembly. It was very very dry. I read about the silicone spray to lube the O-ring when you get it but the trigger require grease also!!! Thanks. Last edited by BIG; January 14th, 2010 at 16:33..