Quote:
Originally Posted by .Zo
This PGC outer barrel is really being a pain in the ass.
The hop up unit wont fit in it so now I have to file all this shit
|
It fits. It's just hard to get the hop up unit inside the chamber. The PGC outer Barrel is actually one of the best accommodating outer barrel out there for Glocks.
Quote:
Sweeeeeeeet
Could you answer my last question :3
"I cant get the hop up unit to go to the line marked in the outer barrel
its like .5 cm from it, will this affect accuracy :s "
|
What is the "line marked" you are referring to?
Here's a video of the slide assembly take down on the G17. Fast Forward to the end. You kinda have to force the hop up unit in there but gently. If you just keep banging at it, you'll damage the inner barrel, the bucking and hop up unit itselt. But once it's in, the hop up unit should be able to move about whilst inside the chamber of the outer barrel.
Metal Slide and Barrel for Marui Glock 17 - YouTube
There is a notch on the hop up unit near the hop up chamber (where the BB enters) that will prevent you from inserting the unit into the outer barrel.. You need to lift that above the edge and then slide the hop up into place.