Airsoft Canada - View Single Post

Blitz85 · April 24th, 2014, 20:36

Alright so I re shimmed from the bevel/ pinion, leaving a very slight amount of play ( less than .10 for sure). Put in a new lonex A1 motor. The battery, motor, and lipo are still getting warm. And I when I take the motor out I would go as far as to say its hot.
I'm out of ideas so anything you guys can think of that I can check or re-do I'm all ears. Or if you can think of any little stupid thing I may have overlooked.... Is it possible I have a short somewhere? I do have a multimeter and there is no excess resistance through any of my wiring/ joints.

April 24th, 2014, 20:36	#38
Blitz85 Trader rating Join Date: Apr 2011 Location: Oshawa	Alright so I re shimmed from the bevel/ pinion, leaving a very slight amount of play ( less than .10 for sure). Put in a new lonex A1 motor. The battery, motor, and lipo are still getting warm. And I when I take the motor out I would go as far as to say its hot. I'm out of ideas so anything you guys can think of that I can check or re-do I'm all ears. Or if you can think of any little stupid thing I may have overlooked.... Is it possible I have a short somewhere? I do have a multimeter and there is no excess resistance through any of my wiring/ joints. __________________ Level 3 certified sniper Last edited by Blitz85; April 24th, 2014 at 20:46..