Quote:
Originally Posted by MadMax
1. Decock hammer
2. Assure that all trigger components lie behind (outside) the trigger loop. The hammer sear and disconnector can end up in front of the trigger if you remove the grip from the frame.
3. Place the leaf spring such that all of the fingers lay on top of the trigger components with the frame pointed downwards. You may have to lift the hammer strut and grip safety to make get the leaf spring into the frame
4. Lower the grip safety and press it into the grip to hold the leaf spring in place.
5. Press in the hammer spring housing until the bushing butts into the bottom of the hammer strut. Maintain pressure on the grip safety to retain the leaf spring.
6. Pull the hammer string into the centre of the mainspring bushing while retaining the leaf spring
7. Push in housing and frame pin.
|
The frame pin is pinned against the bottom of the housing, thus making it exit diagonally.... it's really farked up. >_O;