Quote:
Originally Posted by Taito
I've used the following combination in my RPK with fairly good success and very little if no visable wear after 20K rounds. I was driving a 650mm tightbore, so some of the parts might be a little overkill for a 400fps setup. I'm not suggesting that you go my route as the spring/tightbore/bearing spring guide and piston head pushed the FPS up to the mid 400s, but just take a look and see what you can take for your own use.
Stock CA Ver 3 Shell
Prometheus Double Torque Gearset
Prometheus Bore-Up Cylinder Set (Bearing Piston Head)
G&P Polymidal Piston (Full Tooth)
Prometheus Bearing Spring Guide
Prometheus Anti-reverse Latch
Prometheus Tappet Plate
Systema M140 Spring
Cheers,
Vic.
|
Is a very good chance the gun he's using that spring in has a version 2 mechbox, since those are the only ones that break (yes, seen a couple V3 mechboxes break, but that is extremely rare) even with moderate upgraded springs (my PDI 150% destroyed my stock V2 mechbox within 2 months of basement shooting, not gaming since it was over winter, and the only upgrade was spring and bushings).