Airsoft Canada - View Single Post

KEVORKIAN · August 29th, 2008, 01:14

1.) Remove the slide.
2.) Insert an empty mag (no bb's).
3.) You will notice when the mag is inserted it will come in contact with the slide catch...it looks like a little triangle. Sometimes this part needs to be bent or shaped to properly line up with with the new parts & accessories. Be very careful how much you bend it & HOW you bend it...don't @#$% it up!

I had a TM G17 with the same problem & it had a Guarder slide and an after
market frame.
Works like a charm now with the new PGC slide, hiflow & recoil/hammer springs.

Good luck!

August 29th, 2008, 01:14	#2
KEVORKIAN Trader rating Join Date: Nov 2006 Location: Manitoba	1.) Remove the slide. 2.) Insert an empty mag (no bb's). 3.) You will notice when the mag is inserted it will come in contact with the slide catch...it looks like a little triangle. Sometimes this part needs to be bent or shaped to properly line up with with the new parts & accessories. Be very careful how much you bend it & HOW you bend it...don't @#$% it up! I had a TM G17 with the same problem & it had a Guarder slide and an after market frame. Works like a charm now with the new PGC slide, hiflow & recoil/hammer springs. Good luck! __________________ Kevorkian I SUPPORT THE USE OF SILICA BB BASTARDS!