Airsoft Canada - View Single Post - Modify modular gear sets and sector gear clips

LUTNIT · September 11th, 2008, 00:04

It wont fit because it has to be installed totally parallel to the sector gear. You can't snap it in at an angle which is what you would have to do with the bracket.

Stalker, forgot to mention, when I said M110 I meant Prometheus M110, so only 360-380fps. Modify springs seem to be way higher than any other brand. But you install torque up gears for Modify M110 springs? Just that even up to 450fps in an AEG I have never had any problems with standard ratio gears. Also what gears to use with what springs has nothing to do with my question, I run highspeed gears in my ICS guns with Ms120 springs for 390-400fps with zero problems (except pistons stripping, but thats an ICS problem, not related to the spring.)

September 11th, 2008, 00:04	#4
LUTNIT Trader rating Join Date: Dec 2005 Location: Ottawa	It wont fit because it has to be installed totally parallel to the sector gear. You can't snap it in at an angle which is what you would have to do with the bracket. Stalker, forgot to mention, when I said M110 I meant Prometheus M110, so only 360-380fps. Modify springs seem to be way higher than any other brand. But you install torque up gears for Modify M110 springs? Just that even up to 450fps in an AEG I have never had any problems with standard ratio gears. Also what gears to use with what springs has nothing to do with my question, I run highspeed gears in my ICS guns with Ms120 springs for 390-400fps with zero problems (except pistons stripping, but thats an ICS problem, not related to the spring.) Last edited by LUTNIT; September 11th, 2008 at 00:06..