|
It is so easy to do that you can actually do it with an X-Acto.
You see the plate at the rear, molded to fit the 8.4v mini? There is two screws near the top.
Remove them, and make sure you don't loose the two nuts that are behind it (Keep the gun barrel down and make sure it stays 90deg from the ground).
Then, simply cut the plate about 1/4 inch under the two screw holes.
Re-install the plate.
You are done.
__________________
Quote:
Originally Posted by Drake
Damnit, don't make me add "no discussing temporal paradoxes" to the rules or I'll go back in time and ban you last week.
|
|