Airsoft Canada - View Single Post

Shlappy · March 13th, 2009, 15:04

I should also Share some of my experiences with a Kart EBR.

- I installed a v7 nozzle from modify in the gun. When I test fired the gun the nozzle jammed in the hopup and was literally ripped right off of the tappet plate.

- I completely agree with the poor tolerances with the mechbox. I have never used so many shims on a mechbox.

Basically it is the most frustrating rifle I have ever worked on. I would agree that the cost of getting this rifle up to speed is not worth the time and money. Better off investing in a high quality rifle right from the start.

Cheers,

Cory

March 13th, 2009, 15:04	#11
Shlappy Trader rating Join Date: Apr 2005 Location: Regina, SK	I should also Share some of my experiences with a Kart EBR. - I installed a v7 nozzle from modify in the gun. When I test fired the gun the nozzle jammed in the hopup and was literally ripped right off of the tappet plate. - I completely agree with the poor tolerances with the mechbox. I have never used so many shims on a mechbox. Basically it is the most frustrating rifle I have ever worked on. I would agree that the cost of getting this rifle up to speed is not worth the time and money. Better off investing in a high quality rifle right from the start. Cheers, Cory Last edited by Shlappy; March 13th, 2009 at 18:22..