40mm CO2 airsoft grenade maintenance.

[AngelusNex]

Originally Posted by coachster

what exactly did you file down? I'd have recommended against doing that .

grease or heavy weight silly oil will hold the bearings in place.

the edge around the holes the bearings sit in was warping. flared out and caught the push pin thing... had to disassemble and (not with fair bit of force) pull it out to reset the nade everyshot. Works now. But was a serious pain.

[coach]

Originally Posted by wildcard

looks like I better get all the seals done this week

DUDE! -5° and colder! 600PSI FTW! Ask Zeon! He ate about 6 king rounds today!

Compared to CO2 though, it's a bit softer/weaker as expected but it's 100% stable and zero trigger issues like on CO2 with high PSI. Just be careful that you don't get oil into the tank. ie topping off a nade, that has been freshly lubed, with a tank with less pressure than the nade. you'll get some back fill.