ICS L85A2 mechbox review

[T-Hell]

Toast has the part I will get it from him and photo it...

[T-Hell]

Spoke to Toast here is a description from him

"If he looks at the trigger assembly, there is an open space near the front that holds a return spring. It just has a flimsy plastic piece that holds it, and yours snapped. Most likely, the same thing has happened to him. If he looks in there under good light, the place where the plastic piece is missing should be apparent"

[old_and_slow]

Originally Posted by LUTNIT

The motor adjustment screw is loose and actually tightens as you fire, seizing the mechbox. You need to loctite it in place (medium strength so you can still adjust it later, I think its the blue one) so it doesn't move while firing.

Hi guys - sorry to resurrect this post however......................

I have joined from the UK as there are too many people (kids) in the UK giving incorrect information. I hope you do not mind.............

Re the quote above - what is the ideal setting for the screw? I have noticed my one has tightened and I am unsure how loose/tight it should be.

I have read that other airsofters consider the ICS mechbox to be good upto a M140 or 150 spring. Due to UK site limits I plan to use a Systema M130 in the standard box. Does anyone have any observations on that?

If I were to be going to upgrade the box internals for single shot DMR use what would be the best components to fit. I am limited to 450fps as a DMR. I would be limiting myself to a M130 spring.

Gun spec is currently standard except for M120 and Madbull 6.03 TB

Thanks guys in advance.

[SiriusRMC]

Hi there,
I have the same problem with my ICS L85 as the T-Hell had. But even with description how to fix it, I cannot find the spot where the pin should be. Mayby someone also had the same problem and fixed it?