Fitting Large battery in an G&G GR16 R4C

[Dieselboy]

Hi Guys, umm... i really need to know if it was possible to fit a large battery inside the Ris of a g&g gr16 r4 carbine basicaly an m4a1... if there are none, could i take a large battery and cut the package to spread the batteries inside somehow custom fit .. would that work ? :-(

[norb8]

As far as I know, no you can't. As for the TM M4RIS goes, it can only handle a 600mAh battery too.

[Whozat]

No and No. Get yourself either a Ready Mag, a LAM Unit, a Crane Stock, a Fake M203 or a battery bag. Those are just about all your options.

[CrazyChoda]

Originally Posted by Whozat

No and No. Get yourself either a Ready Mag, a LAM Unit, a Crane Stock, a Fake M203 or a battery bag. Those are just about all your options.

what he said, next time post in the modifcations or airsoft gun discussion thread

[Dieselboy]

Yeah but i dont like the ready mag ... the battery bag i am taking in consideration... but other than that fitting some of the 9.6v batteries into the ris doesnt seem impossible if the plastic is removed placing the batteries on each side of the barel or smthg improvised in that manner!? :-|

[Whozat]

The only cells that you will be able to fit in the RIS will be AA cells, so you'd be looking at 1100Mah NiMH cells at best. Not exactly a lot of juice and rather difficult to change out in my opinion. There really aren't any other options besides the ones I mentioned earlier.

[Polo609]

The batteries will not fit into the ris, theyre just too big to place all of them man. Dont forget theres the barrel that goes through, and also the fake gas tube...which also takes place.

[Goldman]

heads up, THE G&G M4RIS CANNOT accept a crane stock without a HUGE amount of modification that would make it cost-prohibitive to do so, since G&G armalites use the real steel stock adaptors. Your best bet is to go either with a ready mag system, a PEQ-2 battery case, or if you feel adventurous, custom cut one of the model M203s to fit the G&G, and use it to hide a large battery.

[Nocturnal]

if you are getting the carbine series then you already have a battery solution, use their ready mag system O_o.

if you find it uncomfortable then do the battery bag wired to the back LE Stock or front RIS.

Originally Posted by Goldman

heads up, THE G&G M4RIS CANNOT accept a crane stock without a HUGE amount of modification that would make it cost-prohibitive to do so, since G&G armalites use the real steel stock adaptors.

realllllly, thats neat, i never knew that