![]() |
![]() |
#1 |
HFC M190 Slide Lock Problem
I have a HFC M190 and when the BBs are out the slide doesnt lock back... can any one help me?
|
|
![]() |
![]() |
![]() |
#2 |
*AV Status Suspended pending trade resolution*
|
Probably cooldown. Did you empty the magazine quickly or fire many rounds fast before it was empty? My M190 did that.
If not, grip problems aren't unheard of, if you've taken them off.
__________________
Age verifier- Halifax region |
![]() |
![]() |
![]() |
#3 |
i dont think so because it still doesnt lock back right when i first shoot it.
|
|
![]() |
![]() |
![]() |
#4 |
Remove your slide and check your slide lock. If part of it is missing or worn down then that would be your problem.
|
|
![]() |
![]() |
![]() |
#5 |
another thing is that the slide will lock back once and a while but not every time and if i shoot the gun pointing down the slide will lock back.
|
|
![]() |
![]() |
![]() |
#6 |
There's a spring under the left-side grip. If you've removed the grip and the spring is missing, not in the guide on the slide lock or on the frame, then this will happen.
Make sure that spring is installed properly.
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
![]() |
![]() |
![]() |
#7 |
k ill try that
|
|
![]() |
![]() |
![]() |
#8 |
i cant seem to get the left handgrip off
|
|
![]() |
![]() |
![]() |
#9 |
sry nvm got it
|
|
![]() |
![]() |
![]() |
#10 |
And it's fixed?
|
|
![]() |
![]() |
![]() |
#11 |
just checking now ... had lots of trouble getting the spring back... is the slide lock supposed to push downwards or up
|
|
![]() |
![]() |
![]() |
#12 |
nvm about the last post... if u oush the slide lock up then let it go the spring is supposed to bring it back down right?
|
|
![]() |
![]() |
![]() |
#13 |
The spring is suppose to push it down. The magazine will push it up when it's empty, due to a small tab that's attached to the plastic BB "pusher" which is at the top of the magazine spring.
|
|
![]() |
![]() |
![]() |
#14 |
ok the spring is right but the slide still wont lock back.
|
|
![]() |
![]() |
![]() |
#15 |
Is the slide recoiling all the way back when you fire it? What kind of gas are you using?
|
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
Thread Tools | |
|
|
![]() |