VSR-10 Project.

m700murder · August 2nd, 2008, 20:02

use .28 g. they work great, but depending on the actual exact fps of the gun, mabey 30g, or mabey 36g without the grahpite, like paradise said

Muffin · August 2nd, 2008, 20:23

Quote:

Originally Posted by daiviet

Fractions of millimeters make a huge difference, all the air that used to go around the bb in those extra fractions, are now being put towards pushing the bb forward.

Hmm, neat. Alright so I'm going to dump out the 6.05 for something tighter. Some have told me that the 6.01 can jam due to the extreme tight diameter.

Kookamater · August 2nd, 2008, 21:08

Well I've also heard that the cold will shrink that inner barrel too, causing more jams because of shrinkage. If that's untrue someone can correct me.

I'd say a 6.02 should be as low as you go. Even that's kinda pushing it.

tsuru · August 5th, 2008, 13:13

If you're going to be at the game on the 10th, I'll be there as well with my tool bag. I've got a couple of theories on what it could be.
You didn't mention: G-Spec, Pro Sniper or Real Shock? The G-Spec inner barrel is pretty close to 6.05mm so if that's what you're using that may be a contributing factor.

Kokanee · August 5th, 2008, 13:34

I installed a nineball hop bucking in my vsr clone and had the same problem - hooking to the right.

It was the hop arm pressing down on the rubber unevenly. I switched the stock rubber back and the problem went away. If you absolutely have to use the nineball, I have seen various threads that recommend shaving down the hop arm.

Muffin · August 7th, 2008, 00:52

Kokanee, so you simply leveled out the hop arm and that solved your problem?
I just finished my order from ehobby of a nineball rubber and Prothemus 590mm. 6.03. I'll inspect it further once my new parts are in.
Tsuru, I'm afraid I won't be at the game this coming weekend. But I do hope to join you guys for a game shortly. Sorry for not specifying, I have the pro version of the VSR.

Muffin · August 28th, 2008, 22:44

Alright, I just finished installing a Hard type Firefly hopup rubber, and 590mm. Prothemeus 6.03 and .30 BB bastards.
At 150' I can hit a ice cream pail pretty regularly. I noticed that the rubber itself has 2 'nubs' very similar to the hopup arm.
Now it definately has its accurate shots but it still seems to slice to the right from time to time.
Just curious if there is any other things to check to solve this problem.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 2nd, 2008, 20:02	#16
m700murder Banned Trader rating Join Date: May 2008 Location: kingsville, on	use .28 g. they work great, but depending on the actual exact fps of the gun, mabey 30g, or mabey 36g without the grahpite, like paradise said

August 2nd, 2008, 21:08	#18
Kookamater Trader rating Join Date: May 2007 Location: Vancouver, BC	Well I've also heard that the cold will shrink that inner barrel too, causing more jams because of shrinkage. If that's untrue someone can correct me. I'd say a 6.02 should be as low as you go. Even that's kinda pushing it.

August 5th, 2008, 13:13	#19
tsuru Trader rating Join Date: May 2004 Location: Winnipeg, MB	If you're going to be at the game on the 10th, I'll be there as well with my tool bag. I've got a couple of theories on what it could be. You didn't mention: G-Spec, Pro Sniper or Real Shock? The G-Spec inner barrel is pretty close to 6.05mm so if that's what you're using that may be a contributing factor.

August 5th, 2008, 13:34	#20
Kokanee Ministry of Peace Trader rating Join Date: Mar 2002	I installed a nineball hop bucking in my vsr clone and had the same problem - hooking to the right. It was the hop arm pressing down on the rubber unevenly. I switched the stock rubber back and the problem went away. If you absolutely have to use the nineball, I have seen various threads that recommend shaving down the hop arm.

August 7th, 2008, 00:52	#21
Muffin Trader rating Join Date: Sep 2007 Location: Manitoba	Kokanee, so you simply leveled out the hop arm and that solved your problem? I just finished my order from ehobby of a nineball rubber and Prothemus 590mm. 6.03. I'll inspect it further once my new parts are in. Tsuru, I'm afraid I won't be at the game this coming weekend. But I do hope to join you guys for a game shortly. Sorry for not specifying, I have the pro version of the VSR.

August 28th, 2008, 22:44	#22
Muffin Trader rating Join Date: Sep 2007 Location: Manitoba	Alright, I just finished installing a Hard type Firefly hopup rubber, and 590mm. Prothemeus 6.03 and .30 BB bastards. At 150' I can hit a ice cream pail pretty regularly. I noticed that the rubber itself has 2 'nubs' very similar to the hopup arm. Now it definately has its accurate shots but it still seems to slice to the right from time to time. Just curious if there is any other things to check to solve this problem.

VSR-10 Project.

Airsoft Guns Discussion