|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 6th, 2010, 23:27
|
#1 |
|
Upgrading VSR 10, TBB Lengths
Hi everyone, so I am upgrading a socom gear r700 (vsr 10 clone) and I plan on making it the best it can be. I was looking into accuracy upgrades and was originally going to get a 430mm pdi 6.01 TBB for $120 or so, but me wanting the utmost accuracy wondered if getting a silencer and running a 550mm pdi 6.01 would make a large enough difference in accuracy to make it worth the $170, and $40-50 silencer and $10 adapter so in total around $110 more than just a standard 430mm. So in conclusion, is the extra 120mm of barrel length worth $170 extra? (although the silencer looks cool and all and that does justify a bit of the price to me
 ) Thanks in advance everyone!
|
|
|
|
|
June 7th, 2010, 02:10
|
#2 |
|
You need a bore-up everything if you're going to 550mm
|
|
|
|
|
June 7th, 2010, 15:54
|
#3 |
|
hmm sounds expensive, overall is it worth it though?
|
|
|
|
|
|
June 7th, 2010, 16:11
|
#4 |
|
|
It's very expensive...
It's roughly $500 worth of upgrades to bore-up. I stuck with the 430mm barrel for mine ... Aslo, don't spend all that money on the PDI barrel, go with the Laylax 6.03, I had a PDI 6.01 and a 6.05... and the Laylax had no noticeable difference in performance and it's about half the price.
|
|
|
|
|
June 9th, 2010, 17:58
|
#5 |
|
ok man, so you don't think a laylax 6.01 over a 6.03 will make a difference? if not I am ordering the 430mm 6.03 barrel tonight
Also, this is probably a VERY stupid question, but I want to buy this spring guide Link but it says its for the G Spec, will this also work in the pro? I thought internally other than the barrel and cylender head it was the same? Thanks for the replys by the way.
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
