|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 3rd, 2011, 17:15
|
#1 |
|
Nexus U94 PTT wiring to dual pin Kenwood downlead
Does anyone know the pinout for a Dual pin kenwood downleast so that I wire it into a Nexus U94 PTT?
|
|
|
|
|
June 4th, 2011, 22:02
|
#2 |
|
This has the pin outs a little lower down in the document where it says "Speaker/Microphone Connection."
|
|
|
|
|
|
June 5th, 2011, 07:26
|
#3 | |
|
Quote:
The pinout for the 2.5mm plug/pin is 2 conductor. My Kenwood plug has a 3 conductor 2.5mm plug. It must make a difference? I've come across this before and it seems almost impossible to find anything on Kenwood plugs that shows the pinout for the 3 conductor 2.5mm pin.  Very frustrating! Last edited by bbstriker; June 5th, 2011 at 07:29.. |
||
|
|
|
|
June 5th, 2011, 09:11
|
#4 |
|
The 3rd is not used. I have a PTT made by Peltor for my Comtacs that has two Kenwood two pin leads. They are the 3/2 conductor type and work just fine.
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
