M4A1 vs. M4A1 RIS

1shot1kill · July 9th, 2005, 01:33

Can someone tell me if i am able to put a Rail Interface System on a M4A1 Retractable Stock gun? I don't know which one I want to buy. The RIS version is more expensive ...If I bought the M4A1, how much would a RIS system cost if i bought it seperatly? Would I be able then to add stuff like lazers, lights and sights on it?

P/s- This is a flame free zone:kill:

LaZeDoUt^Jr. · July 9th, 2005, 01:44

No, i dont believe that you can fit an RIS unit on the TM m4a1 witout modding it. If you buy the M4 RIS it will save you alot of trouble. If you have RIS you can put lazers, lights ect. Sights can be put onto the rail ontop of the reciever. The TM M4RIS also comes with a LAM unit that stores a 8.4v 600mah battery which you may also have to buy if you get a TM M4a1 unless you stick the battery onto the stock.

1shot1kill · July 9th, 2005, 01:50

I was actually looking at the ICS version. LAM unit? The LAM unit, does it have a lazer or is it fake?

1shot1kill · July 9th, 2005, 01:51

Quote:

Originally Posted by Groombug

Will you be able to put the RIS system onto a TM M4? With the correct brackets and screws, yes you will. Would you also need a new front collar? Probably. Will you need to also buy a vertical grip? Yup. Will you need to figure out an alternate way to store your battery? Very likely.

In the end, is it possible? Yes. Is it worth it? In my books, definitely not. Pony up the extra cash and get an M4-RIS to begin with. Save yourself the trouble.

Thanks :nod:

1shot1kill · July 9th, 2005, 01:53

But does the M4 RIS have the retractable stock? I can't seem to find that anyware.

LaZeDoUt^Jr. · July 9th, 2005, 02:11

Yes the M4 RIS has a retractable stock. No the LAM unit does not have a laser. I am not even sure if its called a LAM unit. Pretty sure its called ANPEQ. If you want to see a pic of one, go to any of the retailer websites listed at the top of the sight under "Canadian Retailers"

Allstarr · July 9th, 2005, 02:23

save $ for a m4s system, less problemes

1shot1kill · July 9th, 2005, 02:27

Quote:

Originally Posted by Allstarr

save $ for a m4s system, less problemes

Whats a M4s system???

Anduril · July 9th, 2005, 02:28

You should buy the M4 RIS, in the long run it will save you money. If you buy the M4A1 and your looking to convert it to a M4 RIS, yes its possible, however the money that your going to spend to convert it, will probably be the money you could have spent on the M4 RIS or even a bit more.
I had the same dilemna when I bought my M4, in the end I got the M4 RIS and I dont regret it. :P

The ICS version has an ANPEQ on it
http://www.wgcshop.com/pcart/shopper...e41188b0fb2dea

I'm pretty sure the ANPEQ just holds a battery, laser not included. Basically its a replica of a real steel one, most airsoft version its just a large box for you to put your battery in while keeping up with the realism.
All M4's should have retractable stocks unless otherwise stated by the seller or dealer. It looks like the ICS M4 RIS has a LE stock too

1shot1kill · July 9th, 2005, 02:43

What i'm basicly looking for is the ICS M4 with a rails system to attach a lazer and other stuff. I've been doing a search on the forum and there are many mixed opinions. some have attached after market rail system to carry these other accessories. I'm sooooooooo friggen confused :banghead:

What the hell is a M4s system???

1shot1kill · July 9th, 2005, 02:56

This is what I want to achive

Duckman · July 9th, 2005, 03:00

it's the latest evolution of the m4 from marui. several issues have been resolved thus being the most "stable/solid" m4 out of the box from marui.

check out the retailers cus i think most of them have it in stock right now.

Allstarr · July 9th, 2005, 04:37

the m4s system as pretty much the most recent m4 that came out

It was fixed problemes like barel hobles, and others

it as a awsome look

http://www.renegaderecon.com/article_details.php?id=70

Nocturnal · July 9th, 2005, 11:40

if you just want to achieve that setup you want. then get the TM M4 RIS. It will be the easiest to acheive your setup.

Personally, i would go for the M4 S-system.
1. It is the newest AEG next to the TM M14
2. They made impovments to certain areas of the AEG
3. the SIR is a solid ABS made design that allows full range of attachments (except M203s, unless you get QD rail attached ones)
4. Its only about an extra $50-$75 more than the older TM M4 RIS.

anyway thers probably more Pros and Cons in the review Allstarr posted above.

Rumpel Felt · July 9th, 2005, 12:17

Let me ask this, looking for realism, ie. metal?

If so, avoid TM. Look at ICS or G&P.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 9th, 2005, 01:33	#1
1shot1kill Trader rating Join Date: Jun 2005 Location: Richmond Hill	M4A1 vs. M4A1 RIS Can someone tell me if i am able to put a Rail Interface System on a M4A1 Retractable Stock gun? I don't know which one I want to buy. The RIS version is more expensive ...If I bought the M4A1, how much would a RIS system cost if i bought it seperatly? Would I be able then to add stuff like lazers, lights and sights on it? P/s- This is a flame free zone:kill:

July 9th, 2005, 01:44	#2
LaZeDoUt^Jr. Trader rating Join Date: Jun 2004 Location: Richmond Hill/Vaughan, Ontario	No, i dont believe that you can fit an RIS unit on the TM m4a1 witout modding it. If you buy the M4 RIS it will save you alot of trouble. If you have RIS you can put lazers, lights ect. Sights can be put onto the rail ontop of the reciever. The TM M4RIS also comes with a LAM unit that stores a 8.4v 600mah battery which you may also have to buy if you get a TM M4a1 unless you stick the battery onto the stock. __________________ Feedback Rating http://www.airsoftcanada.com/classif...php?uid=4921

July 9th, 2005, 02:11	#6
LaZeDoUt^Jr. Trader rating Join Date: Jun 2004 Location: Richmond Hill/Vaughan, Ontario	Yes the M4 RIS has a retractable stock. No the LAM unit does not have a laser. I am not even sure if its called a LAM unit. Pretty sure its called ANPEQ. If you want to see a pic of one, go to any of the retailer websites listed at the top of the sight under "Canadian Retailers" __________________ Feedback Rating http://www.airsoftcanada.com/classif...php?uid=4921

July 9th, 2005, 01:50	#3
1shot1kill Trader rating Join Date: Jun 2005 Location: Richmond Hill	I was actually looking at the ICS version. LAM unit? The LAM unit, does it have a lazer or is it fake?

July 9th, 2005, 01:53	#5
1shot1kill Trader rating Join Date: Jun 2005 Location: Richmond Hill	But does the M4 RIS have the retractable stock? I can't seem to find that anyware.

July 9th, 2005, 02:23	#7
Allstarr Age Status Revoked!! Trader rating Join Date: Nov 2003 Location: montreal,quebec	save $ for a m4s system, less problemes

July 9th, 2005, 02:28	#9
Anduril Trader rating Join Date: May 2004 Location: Vancouver, B.C.	You should buy the M4 RIS, in the long run it will save you money. If you buy the M4A1 and your looking to convert it to a M4 RIS, yes its possible, however the money that your going to spend to convert it, will probably be the money you could have spent on the M4 RIS or even a bit more. I had the same dilemna when I bought my M4, in the end I got the M4 RIS and I dont regret it. :P The ICS version has an ANPEQ on it http://www.wgcshop.com/pcart/shopper...e41188b0fb2dea I'm pretty sure the ANPEQ just holds a battery, laser not included. Basically its a replica of a real steel one, most airsoft version its just a large box for you to put your battery in while keeping up with the realism. All M4's should have retractable stocks unless otherwise stated by the seller or dealer. It looks like the ICS M4 RIS has a LE stock too

July 9th, 2005, 02:43	#10
1shot1kill Trader rating Join Date: Jun 2005 Location: Richmond Hill	What i'm basicly looking for is the ICS M4 with a rails system to attach a lazer and other stuff. I've been doing a search on the forum and there are many mixed opinions. some have attached after market rail system to carry these other accessories. I'm sooooooooo friggen confused :banghead: What the hell is a M4s system???

July 9th, 2005, 03:00	#12
Duckman Trader rating Join Date: Dec 2002 Location: toronto	it's the latest evolution of the m4 from marui. several issues have been resolved thus being the most "stable/solid" m4 out of the box from marui. check out the retailers cus i think most of them have it in stock right now.

July 9th, 2005, 04:37	#13
Allstarr Age Status Revoked!! Trader rating Join Date: Nov 2003 Location: montreal,quebec	the m4s system as pretty much the most recent m4 that came out It was fixed problemes like barel hobles, and others it as a awsome look http://www.renegaderecon.com/article_details.php?id=70

July 9th, 2005, 11:40	#14
Nocturnal oO? Trader rating Join Date: Feb 2004 Location: Stouffville, ON	if you just want to achieve that setup you want. then get the TM M4 RIS. It will be the easiest to acheive your setup. Personally, i would go for the M4 S-system. 1. It is the newest AEG next to the TM M14 2. They made impovments to certain areas of the AEG 3. the SIR is a solid ABS made design that allows full range of attachments (except M203s, unless you get QD rail attached ones) 4. Its only about an extra $50-$75 more than the older TM M4 RIS. anyway thers probably more Pros and Cons in the review Allstarr posted above. __________________ *"SI VIS PACEM, PARA BELLUM"*

July 9th, 2005, 12:17	#15
Rumpel Felt Trader rating Join Date: Jul 2004 Location: Kitchener, Ontario	Let me ask this, looking for realism, ie. metal? If so, avoid TM. Look at ICS or G&P.

M4A1 vs. M4A1 RIS

Airsoft Guns Discussion