Want to get a m203 for my m4

Fox Hound · August 3rd, 2005, 21:23

I own a G&G gr16-r4(for sale) and i wanna get a m203 grenade launcher. the thing is i like the ones that look like this:

but since i have the rail people have been telling me i can only get the one that looks like these with the 2 screws on the side (ew)

the reason i want the first one is because its hugging on to the barrel and i think it looks much cooler. BTW is it worth 350$ rangersairsoft is charging because i am SOOOOOO gonna get one this week

Blastyman · August 3rd, 2005, 21:29

You can get either one. U will need to do some simple mods to make it work with the RIS but its simple.

Fox Hound · August 3rd, 2005, 21:30

can u explain these simple mods?

Blastyman · August 3rd, 2005, 21:34

Get the m203 and you take off the lower RIS panel and then you will see how its fits. Everybarrel system is a bit different. Not sure what the barrel is like on the G&G and how the RIS is mounted.

Freedom Fighter · August 3rd, 2005, 22:14

You may have to grind off part of the underside of the RIS near the delta ring. It's a little tough to explain really. It'd be easier to just show you.

My suggestion is to skip that shitty RIS mounted version and make the barrel mounted version work.

HGI · August 4th, 2005, 05:49

I was in the same boat as you when I was going for the m203... I ended up geting the RIS one and it looks fine and dose the trick..... Look up some photos of the RIS one mounted on a G&G RIS I know I saw one on these forums somewhere.

aftica · August 4th, 2005, 09:58

the regular style m203 looks way better than the r.i.s. style, when mounted on the M4. the G&G barrel does not have the mounting lugs, that those little notches on the back of the m203 fit around. on my sr16 (with G&G barrel ) extensive mods were needed to make it fit right, and to keep the r.i.s. mounted solidly. having said that, it was worth the extra trouble.

mods needed on mine:
1) drill and tap holes for cap screws on each side of barrel, to provide mounting lugs.
2) flip rear r.i.s. mount 180 degrees. (front to back). drill and tap barrel to secure.
3) machine the mounting area of the m203 to allow it to slip over the barrel from below ( quick release style ) and over the installed mounting lugs.
4) add gb-tech quick release mount on the front of m203.

the above mods make for a quick detatch m203 that is solid and works perfectly. if you have not purchased your m203 yet, it MAY be easier to go with the style that uses a barrel adaptor ( instead of the marui, notch mount style ) check into this. ( i think this is the one that Agit-Prop used on his sr16)

ILLusion · August 4th, 2005, 17:51

just curious why you're looking into getting an m203 for a gun which you're planning on selling...

For the most hassle-free M203 add-on, just slap on a G&P Military-Type M203 on to a G&P gun. The barrels are one-piece, and as long as it uses the standard delta ring, it just drops right in.

Fox Hound · August 5th, 2005, 00:03

its for sale for now untill i find someone, but i dont really mind if i dont sell it

Fox Hound · August 6th, 2005, 20:37

What m203 should i purchase? there is so many from rangersairsoft. I cant find any reviews for the launchers anywhere...

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 3rd, 2005, 21:23	#1
Fox Hound Trader rating Join Date: Mar 2005 Location: North Bay / Stoney Creek	Want to get a m203 for my m4 I own a G&G gr16-r4(for sale) and i wanna get a m203 grenade launcher. the thing is i like the ones that look like this: but since i have the rail people have been telling me i can only get the one that looks like these with the 2 screws on the side (ew) the reason i want the first one is because its hugging on to the barrel and i think it looks much cooler. BTW is it worth 350$ rangersairsoft is charging because i am SOOOOOO gonna get one this week

August 3rd, 2005, 22:14	#5
Freedom Fighter Trader rating Join Date: Mar 2003 Location: Mississauga, ON	You may have to grind off part of the underside of the RIS near the delta ring. It's a little tough to explain really. It'd be easier to just show you. My suggestion is to skip that shitty RIS mounted version and make the barrel mounted version work. __________________ Few individuals would view themselves as barbarous, no, instead they view themselves in a different light, a distorted reality that justifies who they are and what they have done.

August 4th, 2005, 17:51	#8
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	just curious why you're looking into getting an m203 for a gun which you're planning on selling... For the most hassle-free M203 add-on, just slap on a G&P Military-Type M203 on to a G&P gun. The barrels are one-piece, and as long as it uses the standard delta ring, it just drops right in. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

August 3rd, 2005, 21:29	#2
Blastyman Trader rating Join Date: Feb 2003 Location: Edmonton ,AB	You can get either one. U will need to do some simple mods to make it work with the RIS but its simple.

August 3rd, 2005, 21:30	#3
Fox Hound Trader rating Join Date: Mar 2005 Location: North Bay / Stoney Creek	can u explain these simple mods?

August 3rd, 2005, 21:34	#4
Blastyman Trader rating Join Date: Feb 2003 Location: Edmonton ,AB	Get the m203 and you take off the lower RIS panel and then you will see how its fits. Everybarrel system is a bit different. Not sure what the barrel is like on the G&G and how the RIS is mounted.

August 4th, 2005, 05:49	#6
HGI Trader rating Join Date: Dec 2003 Location: Nanaimo	I was in the same boat as you when I was going for the m203... I ended up geting the RIS one and it looks fine and dose the trick..... Look up some photos of the RIS one mounted on a G&G RIS I know I saw one on these forums somewhere.

August 4th, 2005, 09:58	#7
aftica Trader rating Join Date: Apr 2004 Location: clarington ont.	the regular style m203 looks way better than the r.i.s. style, when mounted on the M4. the G&G barrel does not have the mounting lugs, that those little notches on the back of the m203 fit around. on my sr16 (with G&G barrel ) extensive mods were needed to make it fit right, and to keep the r.i.s. mounted solidly. having said that, it was worth the extra trouble. mods needed on mine: 1) drill and tap holes for cap screws on each side of barrel, to provide mounting lugs. 2) flip rear r.i.s. mount 180 degrees. (front to back). drill and tap barrel to secure. 3) machine the mounting area of the m203 to allow it to slip over the barrel from below ( quick release style ) and over the installed mounting lugs. 4) add gb-tech quick release mount on the front of m203. the above mods make for a quick detatch m203 that is solid and works perfectly. if you have not purchased your m203 yet, it MAY be easier to go with the style that uses a barrel adaptor ( instead of the marui, notch mount style ) check into this. ( i think this is the one that Agit-Prop used on his sr16)

August 5th, 2005, 00:03	#9
Fox Hound Trader rating Join Date: Mar 2005 Location: North Bay / Stoney Creek	its for sale for now untill i find someone, but i dont really mind if i dont sell it

August 6th, 2005, 20:37	#10
Fox Hound Trader rating Join Date: Mar 2005 Location: North Bay / Stoney Creek	What m203 should i purchase? there is so many from rangersairsoft. I cant find any reviews for the launchers anywhere...

Want to get a m203 for my m4

Upgrades & Modifications