t.m 5.1 lower assembly problem

rogue 46 · November 15th, 2009, 23:35

on my hicapa,im trying to get the grip and lower together properly so that the hammer will cock back and stay there until i put the slide back on. so i do that and the hammer wont lock down ,it just stays up by the spring.is it the grip spring strips?

Thenooblord · November 15th, 2009, 23:41

you have the leaf spring on the wrong side of the sear or sear disconnect, as you put the grip on, make sure the spring is behind the levers (as in towards the back of the gun)

northern_quill · November 16th, 2009, 00:21

This article should give you some visual cues regarding your frame assembly:

http://airsoft-barracks.com/forums/i...howtopic=17450

ILLusion · November 16th, 2009, 13:35

Sounds like your leaf spring (I think that's what you're referring to as the "grip spring strips") is not seated correctly.

Their natural state is pushing forward towards the muzzle. So with that understanding, you should know that each of the prongs of the leaf spring should be resting behind the objects they are touching, and pushing those items towards the muzzle of the pistol.

Also note... reinstallation of the receiver to the grip should ALWAYS be done with the leaf spring and main spring housing removed. Installation without removing the leaf spring can potentially damage it.

StrikeFreedom · December 8th, 2009, 14:43

I installed everything back together accordingly. The slide, hammer and trigger work fine. However, the slide now randomly gets caught onto the hammer when it's sliding forwarding. This wasn't happening before. If I physically push the hammer down a bit the slide will slide forward no problem. So it seems like the hammer isn't cocking or staying cocked all the way down? Sometimes, the slide will slide forward successfully, but also pulls the hammer back to the original position.

Again I didn't experience this problem before I took it apart, so I don't want to shave anything off if I don't have to. I tried reinstalling the pieces a few times and everything works just fine except for this. Would bending the leave spring(s) help?

Edit: Looks like I'm not alone, though it's still weird that this wasn't happening before I stripped the gun. BTW this is with a KJW Hicapa.

boringegg · December 8th, 2009, 15:59

do u have ur nozzle spring in ur blowback unit?

StrikeFreedom · December 8th, 2009, 16:11

I didn't disassemble the upper slide unit at all, so I believe everything is fine up there. I did file down that metal piece on the slide in contact with the hammer a bit, as well as bending the leaf spring (right one that touches trigger and the internal hammer "flap") towards the muzzle. Seems like the problem went away, and hopefully it'll stay that way.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 15th, 2009, 23:35	#1
rogue 46 Trader rating Join Date: May 2009 Location: delta.bc	t.m 5.1 lower assembly problem on my hicapa,im trying to get the grip and lower together properly so that the hammer will cock back and stay there until i put the slide back on. so i do that and the hammer wont lock down ,it just stays up by the spring.is it the grip spring strips?

November 16th, 2009, 13:35	#4
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	Sounds like your leaf spring (I think that's what you're referring to as the "grip spring strips") is not seated correctly. Their natural state is pushing forward towards the muzzle. So with that understanding, you should know that each of the prongs of the leaf spring should be resting behind the objects they are touching, and pushing those items towards the muzzle of the pistol. Also note... reinstallation of the receiver to the grip should ALWAYS be done with the leaf spring and main spring housing removed. Installation without removing the leaf spring can potentially damage it. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

December 8th, 2009, 14:43	#5
StrikeFreedom Trader rating Join Date: Aug 2006 Location: Markham	I installed everything back together accordingly. The slide, hammer and trigger work fine. However, the slide now randomly gets caught onto the hammer when it's sliding forwarding. This wasn't happening before. If I physically push the hammer down a bit the slide will slide forward no problem. So it seems like the hammer isn't cocking or staying cocked all the way down? Sometimes, the slide will slide forward successfully, but also pulls the hammer back to the original position. Again I didn't experience this problem before I took it apart, so I don't want to shave anything off if I don't have to. I tried reinstalling the pieces a few times and everything works just fine except for this. Would bending the leave spring(s) help? Edit: Looks like I'm not alone, though it's still weird that this wasn't happening before I stripped the gun. BTW this is with a KJW Hicapa. Last edited by StrikeFreedom; December 8th, 2009 at 15:02..

November 15th, 2009, 23:41	#2
Thenooblord Can't fix my own guns. Willing to fix yours. Trader rating Join Date: Jan 2009 Location: Sherwood Forest	you have the leaf spring on the wrong side of the sear or sear disconnect, as you put the grip on, make sure the spring is behind the levers (as in towards the back of the gun)

November 16th, 2009, 00:21	#3
northern_quill Trader rating Join Date: Sep 2009 Location: Mississauga, ON	This article should give you some visual cues regarding your frame assembly: http://airsoft-barracks.com/forums/i...howtopic=17450

December 8th, 2009, 15:59	#6
boringegg Trader rating Join Date: Jan 2009	do u have ur nozzle spring in ur blowback unit? __________________

December 8th, 2009, 16:11	#7
StrikeFreedom Trader rating Join Date: Aug 2006 Location: Markham	I didn't disassemble the upper slide unit at all, so I believe everything is fine up there. I did file down that metal piece on the slide in contact with the hammer a bit, as well as bending the leaf spring (right one that touches trigger and the internal hammer "flap") towards the muzzle. Seems like the problem went away, and hopefully it'll stay that way.

t.m 5.1 lower assembly problem

Doctor's Corner