Glock Thread!

juicy · August 4th, 2010, 01:46

RM, Guarder tan frame looks kinda shiny... and more tan than I recall my TM FDE frame looks. Is it actually tan? And does it feel as plastic-y (out of the box) as it looks?

RacingManiac · August 4th, 2010, 09:43

For whatever reason the pic looks like that....the frame doesn't actually look that shiny. The hue is slight different from the TM. It is no more or less plasticy compare to the stock....

Overkill1369 · August 16th, 2010, 05:14

KWA Glock 17 with a HERA-Arms replica carbine stock

Strelok · August 16th, 2010, 12:19

Is there any chance in hell that you could fit that on a G23? Seriously, i've been craving a semi auto carbine like that for ages.

Damn!

Qlong · August 16th, 2010, 12:44

You sure can.

Looks like there are some differences, bulging logo seems to fit the fire selector switch.

How is the build on that clone? Wobbly at all? Are there any internal metal reinforcements at all?

Overkill1369 · August 16th, 2010, 15:16

Quote:

Originally Posted by Strelok

Is there any chance in hell that you could fit that on a G23? Seriously, i've been craving a semi auto carbine like that for ages.

Damn!

You can put pretty much any Glock onto the stock I have since there is a slight bulge underneath the trade makes (with some minor modifications to the Glock selector switch). I am currently modifying my Glock 18C with a threaded barrel and suppressor to give my other stock that suppressed SMG look.

Quote:

Originally Posted by Qlong

You sure can.

Looks like there are some differences, bulging logo seems to fit the fire selector switch.

How is the build on that clone? Wobbly at all? Are there any internal metal reinforcements at all?

There are some minor differences between the one I posted and the one you posted. Yes, the one with the bulging logo can fit a select fire Glock, but you will have to grind down about 2mm off the selector switch for it to function properly. The standard Glock selector switch is too high and drags on the inside of the stock.

As for the build, it is great, very sturdy and very robust for a polymer stock kit. In regards to wobble, there is none. There are so many screws on this thing to tighten that if there is any wobble, just tighten a few screws and the wobble is gone. In regards to metal reinforcements, there are none, the stock is completely polymer.

The down side about installing a select fire Glock in this stock is that you cannot change the fire selector as there is no opening to change your selector.

Strelok · August 16th, 2010, 15:22

Would a KJW fit with the TM kit? I'm speaking pretty much uneducated here, but the KJW's are clones of the TM glocks, right?

Overkill1369 · August 16th, 2010, 15:31

Quote:

Originally Posted by Strelok

Would a KJW fit with the TM kit? I'm speaking pretty much uneducated here, but the KJW's are clones of the TM glocks, right?

I am not 100% sure, but a good way to answer this question is put your KJW Glock in a Serpa holster. If it fits in the Serpa, then yes, it will fit in the carbine stock. If the KJW Glock does not fit in a Serpa holster, then no, it will not fit in the carbine stock.

Strelok · August 16th, 2010, 15:33

Hmm, I dont have one of those available

. Damn.

What is the deciding factor though? Width of the frame and slide? I could easily take measurements if so. See if they would compare with a tm.

sharky1416 · August 16th, 2010, 20:39

KJW's are supposed to be TM clones. You notice similarities when you disassemble each gun.
I used to own a KJW G23 awhile back and I picked up a G17 Blackhawk! Serpa holster. It fit like a glove even though there was that extra length difference from a G23 to a G17. So, assuming you did have a G23 Serpa it would fit.
If what Overkill is saying about the KJW Glock fitting the Carbine frame by using a Serpa holster to verify is true, then this should work...

RacingManiac · August 17th, 2010, 20:58

TM Glock 18C GBB, now with SD slide+barrel set, also installed the Guarder steel spring guide and 150% recoil spring.

This thing is sweet....

BadMrFrosty · August 17th, 2010, 22:50

I was thinking about the SD Slide and Barrel set, but I didn't know if the cost over the PGC set was worth it. What do you think RM?

RacingManiac · August 17th, 2010, 22:54

It does come with a set of machined aluminum sights, which is not present in the PGC set. But tbh I don't know if its that much better than PGC. It does go together without any fitting, which is good....

AngelusNex · August 18th, 2010, 18:01

Well got my PGC Metal barrel/slide today to replace the old plastic ones on my KSC G18c, decided to upgrade from the c to a full size, Jealous?

Sorry for the crappy picks, all i got is my blackberry for photos atm.

BadMrFrosty · August 19th, 2010, 00:16

RM, that's good to hear. I'll wait a bit longer to choose, but if I go with the PGC I'll let you know.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 4th, 2010, 09:43	#182
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	For whatever reason the pic looks like that....the frame doesn't actually look that shiny. The hue is slight different from the TM. It is no more or less plasticy compare to the stock.... __________________ My Arnies' Album My PBase Album Custom Pistol Whore...

August 16th, 2010, 05:14	#183
Overkill1369 Trader rating Join Date: Aug 2009 Location: San Diego, CA	KWA Glock 17 with a HERA-Arms replica carbine stock __________________

August 16th, 2010, 12:44	#185
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	You sure can. Looks like there are some differences, bulging logo seems to fit the fire selector switch. How is the build on that clone? Wobbly at all? Are there any internal metal reinforcements at all? __________________ Weee!

August 4th, 2010, 01:46	#181
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	RM, Guarder tan frame looks kinda shiny... and more tan than I recall my TM FDE frame looks. Is it actually tan? And does it feel as plastic-y (out of the box) as it looks?

August 16th, 2010, 12:19	#184
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Is there any chance in hell that you could fit that on a G23? Seriously, i've been craving a semi auto carbine like that for ages. Damn!

August 16th, 2010, 15:22	#187
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Would a KJW fit with the TM kit? I'm speaking pretty much uneducated here, but the KJW's are clones of the TM glocks, right?

August 16th, 2010, 15:33	#189
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Hmm, I dont have one of those available . Damn. What is the deciding factor though? Width of the frame and slide? I could easily take measurements if so. See if they would compare with a tm.

August 16th, 2010, 20:39	#190
sharky1416 Trader rating Join Date: Oct 2006 Location: Winnipeg, MB	KJW's are supposed to be TM clones. You notice similarities when you disassemble each gun. I used to own a KJW G23 awhile back and I picked up a G17 Blackhawk! Serpa holster. It fit like a glove even though there was that extra length difference from a G23 to a G17. So, assuming you did have a G23 Serpa it would fit. If what Overkill is saying about the KJW Glock fitting the Carbine frame by using a Serpa holster to verify is true, then this should work... __________________ "If you can't remember; the claymore says 'FRONT toward enemy'..."

August 17th, 2010, 20:58	#191
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	TM Glock 18C GBB, now with SD slide+barrel set, also installed the Guarder steel spring guide and 150% recoil spring. This thing is sweet.... __________________ My Arnies' Album My PBase Album Custom Pistol Whore...

August 17th, 2010, 22:50	#192
BadMrFrosty Trader rating Join Date: Apr 2002 Location: Winnipeg, MB	I was thinking about the SD Slide and Barrel set, but I didn't know if the cost over the PGC set was worth it. What do you think RM? __________________ "If you take sexual advantage of her, you're going to burn in a very special level of hell. A level they reserve for child molesters and people who talk at the theater." - Sheppard Book

August 17th, 2010, 22:54	#193
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	It does come with a set of machined aluminum sights, which is not present in the PGC set. But tbh I don't know if its that much better than PGC. It does go together without any fitting, which is good.... __________________ My Arnies' Album My PBase Album Custom Pistol Whore...

August 18th, 2010, 18:01	#194
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	Well got my PGC Metal barrel/slide today to replace the old plastic ones on my KSC G18c, decided to upgrade from the c to a full size, Jealous? Sorry for the crappy picks, all i got is my blackberry for photos atm.

August 19th, 2010, 00:16	#195
BadMrFrosty Trader rating Join Date: Apr 2002 Location: Winnipeg, MB	RM, that's good to hear. I'll wait a bit longer to choose, but if I go with the PGC I'll let you know. __________________ "If you take sexual advantage of her, you're going to burn in a very special level of hell. A level they reserve for child molesters and people who talk at the theater." - Sheppard Book

Glock Thread!

Airsoft Media