This is P90 thread

[Short Round]

[Short Round]

Different set up from your normal P90 (This is a RS gun)

[lurkingknight]

I tried that with a tri-rail and reticle... didn't work so great :P

but I like the idea of it... no lean over the body or have any issues with goggles or cheek weld.. just hold it up and go.

you sure it's RS though? I thought the RD only had a rail on the right side.... unless FN decided that stargate's prop guys were on to something :P

[Short Round]

The newer production models of the P90s all come with rails on both sides. You can however buy left side rails for the older models.

Yes a cool idea, but doubt it would work for airsoft, I would probably interfere with your rig you were running one.

[Miki01]

Always been a fan of P90's but one thing I could never get is why the spring tensioning wind-up mechanism was under the magazine. Wouldn't that mean you'd have to pull the mag out in order to twist it?

[Short Round]

Originally Posted by Miki01

Always been a fan of P90's but one thing I could never get is why the spring tensioning wind-up mechanism was under the magazine. Wouldn't that mean you'd have to pull the mag out in order to twist it?

Yes sir, and this is why I avoid high caps. Stay with the low and mid capacity magazines, if you insist on the high caps though, buy the TM ones, they hold the tension a lot better then all of the clones (atleast from my past experience, that is what I noticed)

[PrIeSt]

Originally Posted by Najohn

Yes sir, and this is why I avoid high caps. Stay with the low and mid capacity magazines, if you insist on the high caps though, buy the TM ones, they hold the tension a lot better then all of the clones (atleast from my past experience, that is what I noticed)

No sir.. The p90 high cap when working properly only needs to be wound once to spend all it's rounds. Unless you buy a high end model. They seldom do and don't seem to last.
A 150-180 round mid cap requires no winding.

[Short Round]

Any high caps that aren't TM I've had bad experiences with, they couldn't hold the tension after a full wind, let alone feed properly.

This was also after maintence and cleaning work on them.

[PrIeSt]

I find with high caps you can't fill them 100% either or they like to spin out mid game.

[BennyBoy]

Looking for a P90 flash hider but notice the m4 style one it came looked similiar to my KAC PDW so tried the suppressor...hides most of the orange for now LOL

Somebody called for a sniper?

[lurkingknight]

lol... I did that with my mp7 the other day... it looks hilarious enough to try it at a game at least once.

[BennyBoy]

I'm gonna have time to hit up UA after the holidays, may do it for a round though it's really front heavy and my wrist starts hurting after a while lol
The suppressor does make a huge difference in how much noise is given off too, pretty neat

[Short Round]

Have no idea if this actually works but anyone wanting to increase their trigger response, this is worth a try

Airsoft P90 semi auto fix problem solved - YouTube

[Short Round]

[kylem_8]

Hey everyone;

This is my new G&G PDW99 (P90). I removed the shitty Green Dot Sight and installed an integrated Red/ Green ACOG Sight. I have also installed a PDI 6.01mm tightbore barrel and the gun is currently shooting at 398FPS. However due to the option to change the FPS on the fly, it can go from about 365-425FPS.