Glock Thread!

[akamikeee]

RM that reminds me of this slide, nice work.

[RacingManiac]

who made that? I want the sight set....lol

[akamikeee]

Detonator, WGC is out of stock of the 17 version but do have the 22 version, retails a bit pricy at $230 USD mark, yeah the sites are sexy.

http://www.wgcshop.com/wgc2008/main/...or&catid=&cat=

[turok_t]

Here is a video of it in action, just click on it..

[Evans]

Very nice, Turok. Full trades and everything. Is that a metal slide?

Also, where did you get the frame supporting the 18c in the pictures? I want it. : D

[turok_t]

Originally Posted by Evans

Very nice, Turok. Full trades and everything. Is that a metal slide?

Also, where did you get the frame supporting the 18c in the pictures? I want it. : D

Thats a plastic slide, everything is stock, just got it last week. Im not sure if I want to get a metal slide though, I like the insane ROF with fast cycling speed, it drains ammo like crazy.. if its a metal slide, ROF will probably go down..

For the frame, I made it myself.

[twistidpair]

Picked up the TM g18c last week and just received the SD slide kit. Upgraded recoil and hammer spring (Guarder 150% recoil and hammer spring) and put in a TK hop twist barrel and nine ball packing.

Kicks hard, full auto is ***CRAZY*** with propane.

Left profile:


Right profile:


The shooters design slide kit is awesome - I had a PGC TM 18c slide kit which needed fitment. The SD kit went on with no issue.

If you've got a TM g18c and are looking to replace the slide and outer barrel - go with the SD kit. The finish is tough and like I said, no filing or Dremel needed.

[RacingManiac]

yeah it fun shooting that thing full auto with metal kit....

[cjboi]

Originally Posted by turok_t

Here is a video of it in action, just click on it..

is that the new TM g18c? I plan on buying one, but im not sure if it will out perform the KSC g18. KSC g18 breaks fast

[twistidpair]

one thing I have experienced when firing full-auto is the trigger safety - the embedded ser # number safety - engages every now and again with the harder kick. Other than that, it's all "shits and giggles" with it.

My next upgrade will be the Guarder frame and metal mag catch.

Originally Posted by RacingManiac

yeah it fun shooting that thing full auto with metal kit....

[waltherglocksmith]

deleted

[cellulose]

I'm going to be getting myself a TM G18C and I would like to know if the machined sights that come with SD slide set are already luminous, as on AirsoftGlobal they seem to just be black.

As well, I'm at a toss up whether to get the PGC or SD slide, either way though are there serial number plates that you can get for them to match up with the slide and outer barrel? I would like to have the same serial on the frame.

So far I have decided to get the following upgrades:

Aluminum Slide (either PGC or SD)
Guarder G17 Frame in Black
Guarder Enhanced Steel Recoil Spring Guide G17
Guarder High Output Valve G17
Guarder Steel Magazine Catch

Things I probably don't need but may get because they are cheap:

Spartan Doctrine Enhanced Piston Head for G18C
Guarder Piston Lid for Marui Glock 18C

If any experienced Glock user could let me know if I'm missing anything or if I'm crazy for getting anything that would be great.

Cheers

[RacingManiac]

No the SD sights are NOT luminous, you even have to paint the white on them yourself....
Although...
http://www.uncompany.com/pageproduct...p?prodid=27732

This is light collecting type, much like the stock TM G17 night sight....not real Tritium...

Once you install the metal slide you'll want to get recoil spring also, though I am sure the Guarder one includes it. You may want to install the hammer spring as well, I was already getting light strike with the long mag at around ~78 degF Ambient temp....

Personally I stop spending money on high flow valve, you can mod them yourself, and to get one for every mag(I have 7) is not cheap....

Whats the difference between the 2 piston head?

When you do get the Guarder frame you may want to take a look at front screw post in the frame, for mine at least it had some molding defect:
http://www.pbase.com/racingmaniac/image/127026378

This point is already a highly stressed spot for normal Glock. I ended up reinforcing mine with added JB weld....

[sushi_boy604]

Originally Posted by aBseNtceLL

I'm going to be getting myself a TM G18C and I would like to know if the machined sights that come with SD slide set are already luminous, as on AirsoftGlobal they seem to just be black.

As well, I'm at a toss up whether to get the PGC or SD slide, either way though are there serial number plates that you can get for them to match up with the slide and outer barrel? I would like to have the same serial on the frame.

So far I have decided to get the following upgrades:

Aluminum Slide (either PGC or SD)
Guarder G17 Frame in Black
Guarder Enhanced Steel Recoil Spring Guide G17
Guarder High Output Valve G17
Guarder Steel Magazine Catch

Things I probably don't need but may get because they are cheap:

Spartan Doctrine Enhanced Piston Head for G18C
Guarder Piston Lid for Marui Glock 18C

If any experienced Glock user could let me know if I'm missing anything or if I'm crazy for getting anything that would be great.

Cheers

I tried the guarder steel magazine catch. It doesn't fit properly without filing down a lot. Still fits but doesn't slide when pressing and depressing it.

Also, what other internals can be used? I am going to get the guarder recoil spring that happens to come with a hammer spring. Will that fit? How about the nozzle g17? The valve knocker? I understand its the same brand but some parts won't all fit. Thanks.

[RacingManiac]

I am not sure if the knocker fits, the springs will. Nozzle won't as the shape has changed.