Gas powered Rifle

[Nakes]

Originally Posted by TALIBANMILAN

I don't know how you could say that...

The WA G&Ps have a ton more options and accessories. The only advantage of WETTI is the simplicity (but that's just my opinion/experience so far)

They seem to have more receiver options and more internal part mfgs... But all the RS aftermarket parts work on the WE... Why even compare replica accessories?

[Kokanee]

Originally Posted by Tsquared

Back when I used to play on this site, I didnt need age verify. The shops should let you browse at least and do age verify in person.

Finding an AV rep is pretty easy, and the most it should take is a 2 minute meet at a Timmies etc to verify your age. There is a good reason the community is self-regulating, and the sheer amount and variety available to you once you get AV status is well worth the small inconvenience.

[L473ncy]

Originally Posted by Tsquared

Back when I used to play on this site, I didnt need age verify. The shops should let you browse at least and do age verify in person.

So you were here when people like Greylocks, HoJo, Tru, and Agit were here?

If so then you would be able to understand the need for this AV system being set in place.

Plus it's not like AV reps are rare, hell there's a few retailers who are AV reps as well including Jeff Baker (Baker_Jeff) and Ken Cheung (KenC).

[Tsquared]

Originally Posted by L473ncy

So you were here when people like Greylocks, HoJo, Tru, and Agit were here?

If so then you would be able to understand the need for this AV system being set in place.

Plus it's not like AV reps are rare, hell there's a few retailers who are AV reps as well including Jeff Baker (Baker_Jeff) and Ken Cheung (KenC).

Not too sure who those were. But it must have been at least 5 years since I last played. Ken Cheung sounds very familiar though. I also had another account, but I totally dont remember the user name for it, however I wasn't ever too big into it at the time. Only played 2 official games, a couple of forest games with friends at their farmland.

But yeah, I just found out there is someone on the forum in my area (Durham) but I hope he is an active member...

BTW. can someone at least in the meantime recommend any gbbr out there?

*Edit
Yes I remember Tru now.. Didnt he use to sell guns here?

[TokyoSeven]

Things have changed a lot in the last few years and will most likely continue to change as airsoft evolves in Canada.

As for a GBBR suggestion I recommend that you poke around for some reviews on the Wetti AWSS M4s or the G&P WOC M4s. Both seem to be very popular at this time.

[Tsquared]

Originally Posted by TokyoSeven

Things have changed a lot in the last few years and will most likely continue to change as airsoft evolves in Canada.

As for a GBBR suggestion I recommend that you poke around for some reviews on the Wetti AWSS M4s or the G&P WOC M4s. Both seem to be very popular at this time.

I've been looking at a lot at the G&P WOC M4s, since they have 50 round mags. What are people's thoughts on reliability?

Also I hear its not very good in cold, how about when using HPA?

I know gbbr's are known to be heavy with mags, but they can't be any heavier then an 20oz co2 tank and 8 paintball pods can possibly be.(just played one long ass match today).

[ToRN]

GBBRs do not use HPA, that's a paintball thing. The gas is stored in the mags, and there is no way to use external gas....yet.

[Tsquared]

Originally Posted by ToRN

GBBRs do not use HPA, that's a paintball thing. The gas is stored in the mags, and there is no way to use external gas....yet.

Yes, but I see no reason why you can't use HPA witht he Co2 Adapter on.

For my M203 I've used and tested Duster Gas, HPA, Propane & Co2.

All work fine. Co2 is the best bang though.



The top half screws right into an HPA or CO2 tank.

[L473ncy]

Originally Posted by Tsquared

Not too sure who those were. But it must have been at least 5 years since I last played. Ken Cheung sounds very familiar though. I also had another account, but I totally dont remember the user name for it, however I wasn't ever too big into it at the time. Only played 2 official games, a couple of forest games with friends at their farmland.

Well whatever, most people don't know them if they didn't hang around too much.

Anyways, you CANNOT EVER use HPA with the current GBBR's because the mag's are whats restricting it (someone explained one time that the mags pressure chambers or w/e would the the prohibitive part in both cost and ability to store the high pressure air since it would be unsafe or something). If you ever do want to go HPA, you'll have to go the "classic airsoft" route and have an external rig + line. I'm personally thinking of getting one myself but that's for later.

For now though propane can actually reach pretty high velocities (over the field limit in some cases), the only problem being that you get the dreaded cooldown effect if firing rapidly.

[coach]

Originally Posted by Tsquared

Yes, but I see no reason why you can't use HPA witht he Co2 Adapter on.

For my M203 I've used and tested Duster Gas, HPA, Propane & Co2.

All work fine. Co2 is the best bang though.

http://shop.ehobbyasia.com/media/cat...c03_1_mark.jpg

The top half screws right into an HPA or CO2 tank.

gas mags (propane/green gas) cannot be used with CO2 or HPA. You will blow out the seals and valves. The CO2 mags use a 12g cartridge and cannot be filled with said charger. This is the same reason GBB pistol mags cannot be used with CO2 or HPA.

simply put, it is a pressure and volume issue. I've explained it before on these forums.

Nades are different since they are designed to use CO2 (depending on which one)

[Qlong]

DO NOT CIRCUMVENT THE AV SYSTEM BY ATTACHING A PIC OF AN AV TAG IN YOUR AVATAR.

You WILL get banned.

[Tsquared]

Originally Posted by Qlong

DO NOT CIRCUMVENT THE AV SYSTEM BY ATTACHING A PIC OF AN AV TAG IN YOUR AVATAR.

You WILL get banned.

lol it was a joke, it doesnt give me access, but jezz, i'll take it off

This forum has change A LOT since I was first here. No age verification needed. But I guess its there to protect it from little kids buying these toys.

[Mobbs]

On this issue I'm steering towards l473ncy for the following reasons having a extensive PB back ground in HPA or CO2 ,that being said every thing has to do with flow and valving. Take for instance the Daytona works on HPA the valve in bolt regulates the speed of the BB and the rearward action of said bolt putting it back into battery,it's up to the sear to do the rest. Just bought A WE Scar this weekend and the trigger group was screwed fixed it thank to Tys sage advise,and yes we have to do some real steel some time.. But better than that I loved the felt recoil almost the same with light loads lol!!!

[TokyoSeven]

Joke or not. You better keep your nose clean. If you don't like how the forum has "changed" feel free to leave nobody is making you stay but while you are here you will abide by forum rules.

[Tsquared]

Originally Posted by TokyoSeven

Joke or not. You better keep your nose clean. If you don't like how the forum has "changed" feel free to leave nobody is making you stay but while you are here you will abide by forum rules.

Anyway I got age verified BTW. I'm just waiting on the admins.

But wait.. You're staff? as in ASC staff? Can you grant me access for the classified? Duy Hua from Airsoft Parts Canada just submitted a request to mark me as AV.