VFC (UMAREX) MP5 GBBR Owners Thread

jordan7831 · February 27th, 2012, 16:10

Would you know if the permatex super lube at canadian tire the Molybdenum? I think it is.

talon · February 27th, 2012, 16:36

read the question wrong, nvm me

ILLusion · February 27th, 2012, 19:14

Quote:

Originally Posted by jordan7831

Would you know if the permatex super lube at canadian tire the Molybdenum? I think it is.

... could you rephrase that?

N_Force · February 27th, 2012, 21:16

Quote:

Originally Posted by Sequential

That low profile rail, is that aftermarket or VFC?

has to be vfc, the other wouldn't work as of the mount is wider. Even the retractable stock too.

jerryman692 · February 27th, 2012, 21:24

Saw somebody did this and try it my self.

Sequential · February 27th, 2012, 22:13

Quote:

Originally Posted by ILLusion

Which Tamiya grease are you using? Molybdenum is better than ceramic for mechanical usage.

Yeah I am using the molybdenum. Not ceramic.

Quote:

Originally Posted by N_Force

has to be vfc, the other wouldn't work as of the mount is wider. Even the retractable stock too.

Damn... It's out of stock everywhere I checked so far...

Rommen · February 28th, 2012, 12:42

I heard that SuperLube (with PTFE) works great on GBBs, I've been using it with great results. Is the molybdenum grease even better?

ILLusion · February 28th, 2012, 14:12

Tamiya molybdenum is really nice stuff, but it's also real expensive. I prefer Super Lube only for the price, but I've used Tamiya molybdenum for a lot of my own stuff as well.

N_Force · February 28th, 2012, 15:41

Quote:

Originally Posted by ILLusion

Tamiya molybdenum is really nice stuff, but it's also real expensive. I prefer Super Lube only for the price, but I've used Tamiya molybdenum for a lot of my own stuff as well.

how about the Permatex - ultra slick synthitic grease?

Brian McIlmoyle · February 28th, 2012, 15:49

Quote:

Originally Posted by N_Force

how about the Permatex - ultra slick synthitic grease?

are we still talking about guns?

I've been using a teflon wax.. on metal on metal parts.. does not attract dust .. and seems to work in to the metal and provide a really slick but non oily surface

ILLusion · February 28th, 2012, 15:54

Quote:

Originally Posted by N_Force

how about the Permatex - ultra slick synthitic grease?

Couldn't say, I've never used that before.

Quote:

Originally Posted by Brian McIlmoyle

I've been using a teflon wax.. on metal on metal parts.. does not attract dust .. and seems to work in to the metal and provide a really slick but non oily surface

That sounds pretty good... where did you get that from?

N_Force · February 28th, 2012, 16:03

Quote:

Originally Posted by Brian McIlmoyle

are we still talking about guns?

I've been using a teflon wax.. on metal on metal parts.. does not attract dust .. and seems to work in to the metal and provide a really slick but non oily surface

is that the one you showed me last time? if that doesn't attract dust would be awesome. now I'm using G96 complete gun treatment for lub. it can't apply on o-ring but work extreme perfect on metal and plastic parts. it creates very smooth surface on the metal as I showed you on my M4. but the trigger group I'm still using grease that's why I would like to know more details. thanks. btw, where can I buy this teflon wax?

Brian McIlmoyle · February 28th, 2012, 16:06

Quote:

Originally Posted by N_Force

is that the one you showed me last time? if that doesn't attract dust would be awesome. now I'm using G96 complete gun treatment for lub. it can't apply on o-ring but work extreme perfect on metal and plastic parts. it creates very smooth surface on the metal as I showed you on my M4. but the trigger group I'm still using grease that's why I would like to know more details. thanks. btw, where can I buy this teflon wax?

PIcked up at LOWES

N_Force · February 28th, 2012, 16:09

regarding the gas mag leak, here is something I would like to share.

release valve has 3 o-ring, 2 large are for sealing the mag and the small is for gas release use. as of my experience, leaking is coming from the gas release one causes by the spring is a bit too weak to hold on position. couldn't find out how to fix but you can use a tool to slightly pull it up and slightly turn it a bit, if the leak stops, that is the same problem as I have. also make sure not damage it.

be careful, don't damage it.

Sequential · March 1st, 2012, 15:04

Quote:

Originally Posted by N_Force

regarding the gas mag leak, here is something I would like to share.

release valve has 3 o-ring, 2 large are for sealing the mag and the small is for gas release use. as of my experience, leaking is coming from the gas release one causes by the spring is a bit too weak to hold on position. couldn't find out how to fix but you can use a tool to slightly pull it up and slightly turn it a bit, if the leak stops, that is the same problem as I have. also make sure not damage it.

be careful, don't damage it.

I don't even know what the problem is, I tried your method to fix it but it doesn't help much. When the mag is under near full pressure it starts to leak a little.

I'll need to find some how to disassemble the mag to get to that valve.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 27th, 2012, 16:36	#17
talon Trader rating Join Date: Feb 2006 Location: Ghosts HQ	read the question wrong, nvm me __________________ http://img.photobucket.com/albums/v2...lon/ghosts.gif ACUFART Forever!!! Team GHOSTS - Fides et Amicitia

February 28th, 2012, 14:12	#23
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	Tamiya molybdenum is really nice stuff, but it's also real expensive. I prefer Super Lube only for the price, but I've used Tamiya molybdenum for a lot of my own stuff as well. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

February 28th, 2012, 16:09	#29
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	regarding the gas mag leak, here is something I would like to share. release valve has 3 o-ring, 2 large are for sealing the mag and the small is for gas release use. as of my experience, leaking is coming from the gas release one causes by the spring is a bit too weak to hold on position. couldn't find out how to fix but you can use a tool to slightly pull it up and slightly turn it a bit, if the leak stops, that is the same problem as I have. also make sure not damage it. be careful, don't damage it. __________________ aka Uncle Last edited by N_Force; February 28th, 2012 at 18:59..

February 27th, 2012, 16:10	#16
jordan7831 will always be Mike Litoris in our hearts Trader rating Join Date: Jul 2004 Location: North York - Toronto	Would you know if the permatex super lube at canadian tire the Molybdenum? I think it is.

February 28th, 2012, 12:42	#22
Rommen Trader rating Join Date: Jul 2011 Location: Mississauga, Ontario.	I heard that SuperLube (with PTFE) works great on GBBs, I've been using it with great results. Is the molybdenum grease even better?

VFC (UMAREX) MP5 GBBR Owners Thread

Airsoft Guns Discussion