words cannot describe how disappointed i am

[cerealmaniac]

thanks ronan.

[Skladfin]

Originally Posted by cerealmaniac

O and FYI i did NOT try different allen keys.(thats what you told me to do) i realize i should just stop what i'm doing and make this public. since things are getting out of hand. and you did mention fixing the red connector. it was nice of you to offer another spade connector for $4 but yea...

Yes, I did tell you to try out different allen keys. But not so hard that you'd strip it.

And yes I did offer you another Prometheus Gold pin spade connector for $4 shipped, after you PMed me about how you snapped it. Like I said, I'm an honest seller, and if the sales had problems that involves ME mistreating the rifle and in which case it consequently malfunctioned, then I WOULD do my best to fix it for you, free of charge.

However these problems were not brought up by me. So I can't(And is not justifiable) that you ask me to repay you for it(That's just common sense). Even then I offered you the best help I could when you broke the parts, what more do you want?

And I did NOT bully him into the sales. After the initial sales broke off, I sent him a negative feedback, so did he, vice versa. He then contacted me again through PM(I did not say a single thing. I actually told him if he wanted to flake, that's fine, but he will receive a negative feedback. Again, common sense), he changed his mind and said he wanted to buy the rifle off of me instead. So I sold it to him(with -$20 lowball), and now he pulls this "I got bullied into buying this" thing on me.

[Forever_kaos]

Well to be fair...

I've stripped a screw after I got it in it's spot and I've seen it done a few times.

[yuhaoyang]

/\ I did as well...
What's with the $20 lowball thing? O.o
or maybe my definition of the word has gone fuzzy.

[cerealmaniac]

Originally Posted by Skladfin

Yes, I did tell you to try out different allen keys. But not so hard that you'd strip it.

And yes I did offer you another Prometheus Gold pin spade connector for $4 shipped, after you PMed me about how you snapped it. Like I said, I'm an honest seller, and if the sales had problems that involves ME mistreating the rifle and in which case it consequently malfunctioned, then I WOULD do my best to fix it for you, free of charge.

However these problems were not brought up by me. So I can't(And is not justifiable) that you ask me to repay you for it(That's just common sense). Even then I offered you the best help I could when you broke the parts, what more do you want?

And I did NOT bully him into the sales. After the initial sales broke off, I sent him a negative feedback, so did he, vice versa. He then contacted me again through PM(I did not say a single thing. I actually told him if he wanted to flake, that's fine, but he will receive a negative feedback. Again, common sense), he changed his mind and said he wanted to buy the rifle off of me instead. So I sold it to him(with -$20 lowball), and now he pulls this "I got bullied into buying this" thing on me.

1st:i never said i got bullied or anything, i just said i knew i was on the short end of the deal. i'm sure lots of ppl can vouch for that, considering whats in the package. FYI i never left you a negative feedback. it was neutral and fair one.i changed my mind on the purchase just cuz i wanted to be the NICE guy in this. i have no intention of arguing with you.Also there was never an initial sales. I simply inquired about the gun and you told me you were doing upgrades and it won't be available until new years.No payment details no nothing exchanged. it wasn't until january 6th or 7th that i agreed to pay you( i wasn't able to find my PM's to back myself up then)I have all the PM's to prove this.They will be uploaded in the original post.

2nd:i told you clearly in the PM's. I opened up the motor plate and the black negative wire that has the tab just broke... (easy fix really, and again it can happen to anybody. Buy from the shape of the shrink wrap i know it wasn't done properly.it wasn't even tight to start with) i didn't really mind that.....and FYI i did not follow your instructions regarding the allen key. to me it wasn't the wisest thing to do... so i never touched it ever since..you even admitted to me they are mismatched screws.

[Skladfin]

We've discussed this to death in the PMs to death... oh my my ....

You flakes on the sales, break the parts yourself, blames me, and post something like this publicly with quotes of PMs where it makes you look like a victim(And all of the damages done in the picture, you did it yourself).... And then 3rd parties say I provided him with a shitty deal, bullied him into the sales... wow...

I'll just let the admins handle this.

[theguy]

As a third party, I'm not going to take a side, but you can't possibly blame the bushing/bearing weirdness on CerealManiac.

Whats the deal with the bushing?

[Twin#1[Op-for]]

I honestly don't know the whole situation or what happened completely, but I'm throwing in my 2 cents.

Skladfin has personally worked on my M4 and I've met him face to face, he is not a fraud or dishonest and is not responsible for these things that have happened. Like I said, I don't know the whole situation so I'm not blaming the OP.

My M4 was perfectly fixed, and I know for a fact that he doens't and would never take shortcuts or let an AEG from his hands after he's repaired it without it in the best shape possible.

[Skladfin]

Originally Posted by theguy

As a third party, I'm not going to take a side, but you can't possibly blame the bushing/bearing weirdness on CerealManiac.

Whats the deal with the bushing?

Yes, the bushing I did those myself. I admit that. But it works perfectly just as in all bearings or all bushings. Neither side moves on the axle, therefore they work the same way.

And then I even sent him two free bushings in case of any happenings on top of that.

Thanks alot for the support Riley!

[hattrick]

This should have been locked hours ago, I warn both of you dont post in here anymore unless you want to feel the wrath.....of aquamarine (i know it doesn't sound like much but he can be a real meany)

[TokyoSeven]

Please, no more posts by anyone else unless you are Skladfin or cerealmaniac at this point in time.

I will be closing this thread for now until an admin can move it to the appropriate location and this situation can be worked out.

[cerealmaniac]

Originally Posted by Skladfin

And then I even sent him two free bushings in case of any happenings on top of that.

there were literally chunks missing from one of the solid bushings.

[Skladfin]

Post a pic, send it to me through PM. They are 5KU 8mms. If there is a problem with them. I will send you two other ones, free.

[Drake]

Okay, as T7 said, if you aren't Skladfin or Cerealmaniac you need to butt out.

Second, I don't know what the OP wants from this? Right now this thread is exactly what it was initially described as: a rant.

I also don't know what the original terms of the deal was. Reading the sales post, it sounds like the gun had problems from the start: how much of it was disclosed, I don't know.

The stripped screw is shitty but its an easy fix.

The snapped connector, too (I've had a few broken ones myself, through no other cause than normal wear).

The bushing thing is just weird, I have to admit (even if it works, its like driving around with one of those half sized spare tires).

Is there anything else?

[TokyoSeven]

Im actually just gona leave it unlocked but seriously if you are not directly related to the matter, keep your opinion to yourself, if you post and you are not related to the situation I will BBQ your ass leave you for dead and say Aqua did it.

Hopefully things are worked out soon.