Looking for a good machinist!

Ross · June 30th, 2011, 01:18

thanks for the steady progress, deadly. you rock my socks off.

deadlydayne · June 30th, 2011, 01:22

as long as your feet dont smell ill take that as a compliment

hahahaha
oh btw, smaller update. Bout another hour on op 3 and then ill be hitting op 4

Ross · June 30th, 2011, 16:45

ok. so you'll be done by the end of this weekend maybe?

deadlydayne · June 30th, 2011, 23:24

Hopefully ill be done machining tomorrow. At least thats the plan. Then they go out to anodizing and then into your hands. also the waranty will be full coverage. Altho if you guys manage to break one it might take me a bit to replace i gotta get more stock in and make a couple extra for waranty sake.

dwinandabp · June 30th, 2011, 23:32

Alright! finally the long awaiting part is near completion.
she's been down too long and I can't play airsoft.
honestly i was giving up and bought a G&P WA M4A1 hehehe, it cost me more than expected :banghead:

deadlydayne · July 1st, 2011, 00:03

hahahaha ya WA is not a cheap brand tho. I hear they are real finicky to get working right tho.... im not sure as ive never even had the chance to touch one.

Ross · July 1st, 2011, 00:41

how long does anno take?

deadlydayne · July 1st, 2011, 00:55

I am not entirely sure, Im sending my parts out with some of the companies parts. And when they send for anno they dont send small amounts. But usually they get all the parts back within the same week sent. So im hoping no more than a week.

Also to get some small talk going and some thoughts perhaps, what does everything think of the Scar H-PR that was released sometime mid last month? heres a link to the blog, tell me what you think, i may have some ideas on a next project. Maybe... http://onlygunsandmoney.blogspot.com...car-rifle.html

IRONSIGHT · July 1st, 2011, 11:12

The new SCAR looks neat, but I don't think more "rail estate" is needed on a SCAR. I'm still hoping for an M4 stock conversion personally but it seems I'm pretty much alone on that one.

deadlydayne · July 1st, 2011, 11:22

well i dont have an m4 to look at, soo if you wanted to send me an m4 buffer tube i could look at it and see what i could do? up to you... im just trying to find my next project. I kinda like PR look over the SSR.

Eeyore · July 1st, 2011, 11:33

Quote:

Originally Posted by deadlydayne

well i dont have an m4 to look at, soo if you wanted to send me an m4 buffer tube i could look at it and see what i could do? up to you... im just trying to find my next project. I kinda like PR look over the SSR.

Deadlydayne signature flashhiders?

deadlydayne · July 1st, 2011, 11:52

HAHAHA, if i had a lathe. I do however have a company with a shload of screw machines.... maybe..... also as a small update.... if i do say so myself damn when i get it right i do some fine work, these look so good i may have to keep them all for myself =P anodize goes out next week 5th of july and should only take 1 week. Thats the companies standard anno time. They said at latest 2 weeks (but thats only if they fuck up the color, and normally thats only on gunmetal grey, black they get right first time everytime)

dwinandabp · July 1st, 2011, 12:23

i found out after bought WA system although they have loads of aftermarket parts available, the thing is that they're not cheap. the nozzle keeps deformed after couple hundred shots and need reinforced parts every here and there, it almost cost me an arm and a leg...
well that's the other story..

anyway. has anyone seen any replacement nozzle for open bolt? i only found RA tech nozzle for closed bolt, just in case this one damaged

I just prep up my scar as soon as I read that this part is going to be available soon. but when I fill my long abandoned WE mags and all three of them are leaking. are the o-rings shrunk when it is not filled with gas?

hopefully no more breaking on the other parts...

deadlydayne · July 1st, 2011, 12:47

try oiling your mags, mine leaked for a bit (i run C02), i pressed the nozzle in on the mag, dropped some oil in and voila no more leak. I havent seen a replacement nozzle, but i havent been looking either, so they might be there somewhere. Unless WE is fairly confident the plastic one wont break anytime soon (yea right)

Ross · July 1st, 2011, 13:43

There is a guide on how to fix leaky mags on this forum. I have tried it and it works. It involves buying blue gasket maker. Great stuff.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 30th, 2011, 01:18	#406
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	thanks for the steady progress, deadly. you rock my socks off. __________________

June 30th, 2011, 16:45	#408
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	ok. so you'll be done by the end of this weekend maybe? __________________

July 1st, 2011, 00:41	#412
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	how long does anno take? __________________

June 30th, 2011, 01:22	#407
deadlydayne Trader rating Join Date: Mar 2011 Location: Michigan, USA	as long as your feet dont smell ill take that as a compliment hahahaha oh btw, smaller update. Bout another hour on op 3 and then ill be hitting op 4

June 30th, 2011, 23:24	#409
deadlydayne Trader rating Join Date: Mar 2011 Location: Michigan, USA	Hopefully ill be done machining tomorrow. At least thats the plan. Then they go out to anodizing and then into your hands. also the waranty will be full coverage. Altho if you guys manage to break one it might take me a bit to replace i gotta get more stock in and make a couple extra for waranty sake.

June 30th, 2011, 23:32	#410
dwinandabp Trader rating Join Date: May 2011 Location: Jakarta, Indonesia	Alright! finally the long awaiting part is near completion. she's been down too long and I can't play airsoft. honestly i was giving up and bought a G&P WA M4A1 hehehe, it cost me more than expected :banghead:

July 1st, 2011, 00:03	#411
deadlydayne Trader rating Join Date: Mar 2011 Location: Michigan, USA	hahahaha ya WA is not a cheap brand tho. I hear they are real finicky to get working right tho.... im not sure as ive never even had the chance to touch one.

July 1st, 2011, 00:55	#413
deadlydayne Trader rating Join Date: Mar 2011 Location: Michigan, USA	I am not entirely sure, Im sending my parts out with some of the companies parts. And when they send for anno they dont send small amounts. But usually they get all the parts back within the same week sent. So im hoping no more than a week. Also to get some small talk going and some thoughts perhaps, what does everything think of the Scar H-PR that was released sometime mid last month? heres a link to the blog, tell me what you think, i may have some ideas on a next project. Maybe... http://onlygunsandmoney.blogspot.com...car-rifle.html Last edited by deadlydayne; July 1st, 2011 at 07:58..

July 1st, 2011, 11:12	#414
IRONSIGHT Trader rating Join Date: Mar 2006 Location: Mount Albert (North of Toronto)	The new SCAR looks neat, but I don't think more "rail estate" is needed on a SCAR. I'm still hoping for an M4 stock conversion personally but it seems I'm pretty much alone on that one.

July 1st, 2011, 11:22	#415
deadlydayne Trader rating Join Date: Mar 2011 Location: Michigan, USA	well i dont have an m4 to look at, soo if you wanted to send me an m4 buffer tube i could look at it and see what i could do? up to you... im just trying to find my next project. I kinda like PR look over the SSR.

July 1st, 2011, 11:52	#417
deadlydayne Trader rating Join Date: Mar 2011 Location: Michigan, USA	HAHAHA, if i had a lathe. I do however have a company with a shload of screw machines.... maybe..... also as a small update.... if i do say so myself damn when i get it right i do some fine work, these look so good i may have to keep them all for myself =P anodize goes out next week 5th of july and should only take 1 week. Thats the companies standard anno time. They said at latest 2 weeks (but thats only if they fuck up the color, and normally thats only on gunmetal grey, black they get right first time everytime)

July 1st, 2011, 12:23	#418
dwinandabp Trader rating Join Date: May 2011 Location: Jakarta, Indonesia	i found out after bought WA system although they have loads of aftermarket parts available, the thing is that they're not cheap. the nozzle keeps deformed after couple hundred shots and need reinforced parts every here and there, it almost cost me an arm and a leg... well that's the other story.. anyway. has anyone seen any replacement nozzle for open bolt? i only found RA tech nozzle for closed bolt, just in case this one damaged I just prep up my scar as soon as I read that this part is going to be available soon. but when I fill my long abandoned WE mags and all three of them are leaking. are the o-rings shrunk when it is not filled with gas? hopefully no more breaking on the other parts...

July 1st, 2011, 12:47	#419
deadlydayne Trader rating Join Date: Mar 2011 Location: Michigan, USA	try oiling your mags, mine leaked for a bit (i run C02), i pressed the nozzle in on the mag, dropped some oil in and voila no more leak. I havent seen a replacement nozzle, but i havent been looking either, so they might be there somewhere. Unless WE is fairly confident the plastic one wont break anytime soon (yea right)

July 1st, 2011, 13:43	#420
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	There is a guide on how to fix leaky mags on this forum. I have tried it and it works. It involves buying blue gasket maker. Great stuff.

Looking for a good machinist!

Upgrades & Modifications