Looking for a good machinist!

[deadlydayne]

Ahhh theres Ross, ive had nothing but good news today and I expected Ross to be the first to jump on that, I was starting to get worried

[Ross]

rofl.

[Nomisil]

(I am new to gbb and the following is my experience on fixing leak mags. If any of you find it trival, please ignore this post.)

I need to fix 6 out of 8 mags last month after winter hibernation (though they were all fed with gas + silicon to start with).

From my experience, WE use some kind of glue to secure the oring in place. Probably make it easier to assemble. Deformation (and leak) usually happen where they put the glue on.

All I did is to carefully remove any trace of dry glue (both on the oring and the cover), and put everything back together. That fix 5 of my leaky mags. The last one was a bit stubborn. All it takes is to put some black silicon (bought from Home Depot) around the O-ring. The oring did strunk a bit, but you should be able to stretch it by mount it on the mag cover first.

Lastly, (I read it somewhere from the internet), try use a clam or two, to hold the well aligned mag, oring and cover "tightly" intact before putting the screws back on. It helps a lot to avoid the oring got misalign while your putting on the screw one by one. And, it'll probably help avoid damage to the tiny oring around the screw.

FYI, the tiny screw sealing oring is of the following size, and it can be found from ebay

3mm I.D. (inner diameter)
1mm thickness
5mm O.D (outer diameter)

Originally Posted by dwinandabp

I just prep up my scar as soon as I read that this part is going to be available soon. but when I fill my long abandoned WE mags and all three of them are leaking. are the o-rings shrunk when it is not filled with gas?

[Nomisil]

For OB loading nozzle, all I found is this
http://www.bbdragon.com.tw/product_i...oducts_id/2659

BBDragon stocks loading nozzles for all other WE GBBRs, but not for SCAR yet.
They only have bolt carrier + loading nozzle combo for $43. For such price, I would rather buy an extra OB kit

Originally Posted by deadlydayne

try oiling your mags, mine leaked for a bit (i run C02), i pressed the nozzle in on the mag, dropped some oil in and voila no more leak. I havent seen a replacement nozzle, but i havent been looking either, so they might be there somewhere. Unless WE is fairly confident the plastic one wont break anytime soon (yea right)

[Nomisil]

Deadlydayne, how about this



Not sure how others think. But, I personlly would like to put one of this, plus a VFC 8" outter barrel and a M14 inner barrel onto my SCAR

Originally Posted by deadlydayne

I am not entirely sure, Im sending my parts out with some of the companies parts. And when they send for anno they dont send small amounts. But usually they get all the parts back within the same week sent. So im hoping no more than a week.

Also to get some small talk going and some thoughts perhaps, what does everything think of the Scar H-PR that was released sometime mid last month? heres a link to the blog, tell me what you think, i may have some ideas on a next project. Maybe... http://onlygunsandmoney.blogspot.com...car-rifle.html

[Deadpool]

Does a Scar need more rails and be more front heavy?

[deadlydayne]

Thats why I liked the SCAR H-PR, it added rails with less weight, plus i kinda liked the look of it. Sorry boys I kinda got pissed at my phone and smashed it so it might take me longer to reply to emails. Parts are about 3/4 done. Im clockin out as ive been up for over 24hrs and its my bro. birthday so movie dinner, bed, and back at it at 9am tomorrow to finish the rest.

[deadlydayne]

I know this is a double post for me but I felt that the news im about to give you deserves its own post instead of an Edit. I have at 2pm eastern time =P Finished Machining Part #27 (deadly27). They are packaged and will be sent to anodizing after the holidays (Tuesday) once I recieve the parts I can begin collecting and shipping! Will post pics later (couldnt find the USB cable to upload)

[Eeyore]

Originally Posted by deadlydayne

I know this is a double post for me but I felt that the news im about to give you deserves its own post instead of an Edit. I have at 2pm eastern time =P Finished Machining Part #27 (deadly27). They are packaged and will be sent to anodizing after the holidays (Tuesday) once I recieve the parts I can begin collecting and shipping! Will post pics later (couldnt find the USB cable to upload)

Great news. Thanks for all your efforts.

[Ross]

Awesome deadly. Thank you.

[deadlydayne]

You guys are more than welcome =) gives me something to do during the days... plus here soon its gets your guns operational again

[Ross]

You should start taking pming people about their addresses and payment information as it's going to take at least a few days or weeks to get everyone to message you back on that list.

[deadlydayne]

PICTURES!!!

[Eeyore]

Did you mill a complete upper for the SCAR or just remove the paint?

[KrashRider]

Just an observation but it looks like the sling attachement point on the ejection port side of part# 27 was left out. Doesn't bother me though because I use the other ones. Just a heads up for meaybe some lefty's that use the other side for a sling attachment.

I stand corrected I see it now. Yup hard to see in most pic's sorry