VFC (UMAREX) MP5 GBBR Owners Thread

Padkiller · March 1st, 2012, 16:03

Here's a few of my beast!

Couple of upgrades, azimuth lower receiver and reinforced nozzle.
VFC Handguard with light (Very powerfull light BTW!)
VFC rail
Dytac Aimpoint T1 replica
Magpul Magpul

Subgun

That's about it for me!

Padkiller · March 1st, 2012, 16:38

One thing though! I have TWO mags! One leaks from what appears to be the bottom valve and the other leaks from somewhere on the top of the mag? Help?!

N_Force · March 2nd, 2012, 00:03

Quote:

Originally Posted by Padkiller

One thing though! I have TWO mags! One leaks from what appears to be the bottom valve and the other leaks from somewhere on the top of the mag? Help?!

the top leak (from the lip for release gas)probably is caused by the spring for release valve is not strong enough to hold the o-ring in place as the way I temporary fixed. (check my last post see if it helps). the bottom leak, congras, you have to disassemble the whole piece to fix, DON'T just try to tighten the intake valve, you'll break it. I did it already. lol.. disassemble the may is pain in the ass. have fun...

N_Force · March 2nd, 2012, 00:12

http://www.gb-tech.com.tw/newsite/download.asp?page=2

if you don't have the UMAREX HK MP5A2 GBB Parts List, you can down load it here.

Padkiller · March 2nd, 2012, 00:14

Thanks man, I'll check that out! It seems these mags are not reliable for sh*t! The top leaking one just got in last week, didn't even shot it!

N_Force · March 2nd, 2012, 00:47

I would say this is a good mag in one piece. sealing part is at the bottom. I like this design, but if they can change part #47 in anti-clockwise to fit in part #51(in-take valve), the sealing is even better. that's why I suggest you don't tighten the in-take valve by itself. if you do it, part51 is un-tightened, then you'll never fix the leak, even worst.

Padkiller · March 2nd, 2012, 00:56

Alrighty! One thing, I'm not so good at theses things, do you think you could do it for me? I can pay!

N_Force · March 2nd, 2012, 01:19

Quote:

Originally Posted by Padkiller

Alrighty! One thing, I'm not so good at theses things, do you think you could do it for me? I can pay!

I'm not a gun doctor and I do it myself for hobby and for fun. this mag it seems temporary fixed for now but never know what's going on next. I suggest you get someone local to help you would be the best. if you have questions, i would be happy to share what i know.

Greydingoe · March 2nd, 2012, 21:12

Does anyone know if you can upgrade the inner barrel on the MP5 and what brands are compatible?

N_Force · March 19th, 2012, 00:16

Look like the coming up VFC MP5SD model is much better design than the A3, the two barrels and the body are all in one piece. also I love the MP5K...

http://www.facebook.com/VegaForceCompany

Padkiller · March 19th, 2012, 00:17

And the FPS looks more fieldable!!!

Quote:

Originally Posted by N_Force

Look like the coming up VFC MP5SD model is much better design than the A3, the two barrels and the body are all in one piece.

Bloodstriker · March 22nd, 2012, 03:18

Quote:

Originally Posted by pancakedestroyer

You aren't AV'd so we're not able to tell you.
Get age verified and you'll get access on where to buy stuff like this.

Now that I'm AV'ed. Any chance on tell me the different places I can purchase this?

Goldman · April 29th, 2012, 17:08

So it sounds like these are not yet fieldable...

Is this the general impression from Canadian owners?

turok_t · May 2nd, 2012, 16:02

VFC MP5 SD..gonna try some steel upgrades shortly

ap27 · May 2nd, 2012, 16:20

^Sexy beast

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 1st, 2012, 16:03	#31
Padkiller Trader rating Join Date: Nov 2010 Location: In my pants, Quebec!	Here's a few of my beast! Couple of upgrades, azimuth lower receiver and reinforced nozzle. VFC Handguard with light (Very powerfull light BTW!) VFC rail Dytac Aimpoint T1 replica Magpul Magpul Subgun That's about it for me! __________________

March 1st, 2012, 16:38	#32
Padkiller Trader rating Join Date: Nov 2010 Location: In my pants, Quebec!	One thing though! I have TWO mags! One leaks from what appears to be the bottom valve and the other leaks from somewhere on the top of the mag? Help?! __________________

March 2nd, 2012, 00:12	#34
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	http://www.gb-tech.com.tw/newsite/download.asp?page=2 if you don't have the UMAREX HK MP5A2 GBB Parts List, you can down load it here. __________________ aka Uncle

March 2nd, 2012, 00:14	#35
Padkiller Trader rating Join Date: Nov 2010 Location: In my pants, Quebec!	Thanks man, I'll check that out! It seems these mags are not reliable for sh*t! The top leaking one just got in last week, didn't even shot it! __________________

March 2nd, 2012, 00:47	#36
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	I would say this is a good mag in one piece. sealing part is at the bottom. I like this design, but if they can change part #47 in anti-clockwise to fit in part #51(in-take valve), the sealing is even better. that's why I suggest you don't tighten the in-take valve by itself. if you do it, part51 is un-tightened, then you'll never fix the leak, even worst. __________________ aka Uncle

March 2nd, 2012, 00:56	#37
Padkiller Trader rating Join Date: Nov 2010 Location: In my pants, Quebec!	Alrighty! One thing, I'm not so good at theses things, do you think you could do it for me? I can pay! __________________

March 2nd, 2012, 21:12	#39
Greydingoe Trader rating Join Date: Jul 2009 Location: Calgary	Does anyone know if you can upgrade the inner barrel on the MP5 and what brands are compatible?

March 19th, 2012, 00:16	#40
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	Look like the coming up VFC MP5SD model is much better design than the A3, the two barrels and the body are all in one piece. also I love the MP5K... http://www.facebook.com/VegaForceCompany __________________ aka Uncle Last edited by N_Force; March 19th, 2012 at 00:32..

April 29th, 2012, 17:08	#43
Goldman Trader rating Join Date: Dec 2001 Location: Toronto	So it sounds like these are not yet fieldable... Is this the general impression from Canadian owners? __________________ Maybe you'll find someone else to help you. Maybe black mesa... THAT WAS A JOKE, ha ha, fat chance. My Buy/Sell 1337ness rating

May 2nd, 2012, 16:02	#44
turok_t Trader rating Join Date: Feb 2009 Location: Toronto, Ontario, Canada	VFC MP5 SD..gonna try some steel upgrades shortly Last edited by turok_t; October 7th, 2017 at 13:03..

May 2nd, 2012, 16:20	#45
ap27 Trader rating Join Date: Jun 2010 Location: Milton, ON	^Sexy beast __________________ H&K G36c (KWA) / Glock 18c (TM) / Kimber LAPD SWAT Custom (TM) / Mossberg M500 (ACM)

VFC (UMAREX) MP5 GBBR Owners Thread

Airsoft Guns Discussion