Sig Sauer P226 Navy - Naval Special Warfare #0146

[Blastyman]

Alrighty. I have determined that the KM valve does work better then the stock one. By about 20-40FPS.

Might have to give the firefly a try though. Something I never really paid attention to before was lining up the big port of the valve directly to the exit hole in the top of the mag.

I didn't realize before so I scratched a small mark so once I screwd the valve in I could stop with the large port right at the top to allow the best gas flow.

Once I did that my FPS went from about 295-300 to 315-320.

Doing the same with the stock valve took it from 265 to about 275/280fps.

Anyhow its shooting pretty good now. Thanks for the help everybody.

Someday I hope my p226 can be as sweet as Brians.

Just got to save up for a nicer metal slide/frame then the action one.

[Gorillaz]

WoooW nice gun ILLusion :tup:


Here is my P226 Navy


More pic: http://www.putfile.com/gorillaz/images

Info:
UN Custom-Marui SIG P226 Navy NSW Full Metal
-Marui SIG P226 Based
-Prime Metal Frame & Slide for Marui P226 (Navy NSW 0157)
-Hi-Flow Valve And Strengthed Recoil Spring Installed
-Tuned For Top Gas

[chickmagnet373]

Hey, where can I get the Prime (navy) kit for the TM P226 at a reasonable price??

[Kid]

Originally Posted by Gorillaz

WoooW nice gun ILLusion :tup:


Here is my P226 Navy

Looks like he lubes the same way I do.

[super_six_four]

damn. i like the flatter black to it. the TM P226R i had was quite shiny

[Wilson]

Originally Posted by ILLusion

Gallery here: http://www.pbase.com/illusive_airsoft/p226navy





































Parts list:
- Prime P226 metal slide & lower receiver with individual unique serial numbers (mine is Naval Special Warfare 0146)
- Prime aluminium suppressor & threaded barrel (suppressor not detailed in photos)
- GB-Tech AAC Scorpion suppressor
- PDI 6.01mm extended inner barrel
- Hogue P226 rubber grip
- Guarder 150% recoil & hammer spring
- Firefly spring guide with bearings
- Firefly rocket valve and piston head set
- Guarder enhanced loading muzzle

Doctersight & mount are on it's way...



Shoots 320.3fps with KSC Perfect 0.25g BBs and Firefly high flow valve.... which is equivalent to 364fps with 0.20g BBs.

Of course, if a 0.20g BB was chronied, it would never shoot that high. That's only due to the characteristics of gas guns and how more energy is used in pushing out heavier BBs.

A chronied 0.20g BB on this gun would be no more than 340fps.

Absolutely gorgeous.

You have inspired me to build one myself, unless of course this one is for sale.

[xandrewx]

hot damn!!! enough said

[ILLusion]

Originally Posted by Wilson

Absolutely gorgeous.

You have inspired me to build one myself, unless of course this one is for sale.

Not at the moment... but it's not seeing much use, so it's possible that the right dollar amount could initiate interest.

Keep in mind that the numbers I'm looking for are the financially endowed and well-beyond what a minor could afford. Think four digits.

[Lakonian]

Originally Posted by ILLusion

Not at the moment... but it's not seeing much use, so it's possible that the right dollar amount could initiate interest.

Keep in mind that the numbers I'm looking for are the financially endowed and well-beyond what a minor could afford. Think four digits.

I'm assuming 1,200$ ish..

It really is fucking gorgeous though.. I wish sigs were lefty friendly..

[The Saint]

Originally Posted by kos

I wish sigs were lefty friendly..

I don't know, I think it's pretty lefty friendly. The only control that really matter is the decock lever and a left hand person can easily use that with their index finger. Otherwise, you can switch the mag release to the otherside, there is no manual safety to worry about and the slide release is quite inconsequential.

[Goodl2ussian]

skeet.

[ILLusion]

========================
September 12th, 2008 Update
========================

It was lovely having this gun in my collection for the time I had it, but unfortunately, it was time for it to go. I never found the chance to use it in my play style and my arsenal was quickly filled up with my Hi-Capa collection.

This P226 has found a home with a new owner, and I hope he treats her well and she has a wonderful future. I took the time to take a couple of more photos before she left the stable. I hope you enjoy the photos as much as I enjoyed having her in my collection.

[808]

You're an evil bastard.

Only because I didn't see this thread until now. I so would have bought this. Sold everything I own if necessary... ok - almost everything.


She was a beauty.

[bodydropper]

wow!

[Danke]

I need to check my 649 #s.