Lipo Buffer Tube option

[TokyoSeven]

Probly no more than 13-14 CM.

[m102404]

The short KA 11.1v 1100mah 15C battery will fit nicely, with the wires/connectors. The other longer stock tube lipo's will still have the wiring/plugs sticking out a bit

[MADDOG]

Originally Posted by Blackthorne

Thanks budz. I was just looking around trying to figure out to convert Miz gun over to lipo.

What charger and alarm do you have bro?

You forget about those new Madbull LifePo I loaned to you at CQB.
Fit perfectly in the foregrip (Non RAS/RIS) and no worries of over discharge battery failure. I use these exclusively now and love them. Just use till they run out of juice to pull the spring, no need for alarms the battery knows when tostop working and the life span for recharging is much longer.

You have to buy the proprietary charger though as the connector for the charging unit is not standard (Dirty move Madbull, I found out the hard way). Airsoft parts.ca has the full line up.

http://www.madbullairsoft.com/Englis...index&cPath=36

[Zeonprime]

Originally Posted by MADDOG

You forget about those new Madbull LifePo I loaned to you at CQB.
Fit perfectly in the foregrip (Non RAS/RIS) and no worries of over discharge battery failure. I use these exclusively now and love them. Just use till they run out of juice to pull the spring, no need for alarms the battery knows when tostop working and the life span for recharging is much longer.

You have to buy the proprietary charger though as the connector for the charging unit is not standard (Dirty move Madbull, I found out the hard way). Airsoft parts.ca has the full line up.

http://www.madbullairsoft.com/Englis...index&cPath=36

So you swear by the madbull products? I've been seriously considering going over to LifePo even outfitted one of my guns with a TM3 in prep for a new battery.

[heikis]

Originally Posted by m102404

The short KA 11.1v 1100mah 15C battery will fit nicely, with the wires/connectors. The other longer stock tube lipo's will still have the wiring/plugs sticking out a bit

so I might have troubles fitting a 125mm Firefox lipo in there...
If anybody has experience fitting a longer firefox lipo (125mm) inside a king arms buffer tube then sure let me know about it!

thanks