Looking for a good machinist!

[deadlydayne]

Stripped, polished and clear coated receiver. Sorry to bust ur bubble sir Krash, but believe me its there =) you cant see it due to the angle of the last picture but you can see it in almost every other picture

[Eeyore]

Originally Posted by deadlydayne

Stripped, polished and clear coated receiver.

Damn. I was hoping you could mill uppers.

I was gonna ask for a WE M4 upper.

Oh well.

[Ross]

Those parts look great.

[dwinandabp]

Thanks for the info guys, really appreciate it.
i fixed my mag by lubing the o-rings and it worked so far.
about the nozzle, is scar nozzle using the same nozzle as M4? i saw it on bbdragon

Dayne, great job! thank you for making our scar operational again.

[Nomisil]

I don't think so, because the tip of the nozzle looks different. So is G39 for the same reason.

I am sure that it's not the M14 one neither, as I've seen one from my friend (it's much bigger).

If the Scar nozzle is not unique, it would possibly be the same as the PDW one as they look very similar.

Originally Posted by dwinandabp

Thanks for the info guys, really appreciate it.
i fixed my mag by lubing the o-rings and it worked so far.
about the nozzle, is scar nozzle using the same nozzle as M4? i saw it on bbdragon

Dayne, great job! thank you for making our scar operational again.

[deadlydayne]

Ok so parts went to anodizing today with about 3000 RC parts. So they said 2 weeks max on anodizing. *small update*

Also Ross, I remember you mentioning somewhere you'r Scar is a DMR. Would you mind posting some pics for me. What tbb you have in it, what outer barrel. where you bought them ect ect. Im lookin to build mine in DMR form also and Im not sure wich tbb to use, the m14, or the RA tech "WE Long tbb 510mm" and I cant seem to find an outer barrel thats around 15-20" I would like to build it without a mock suppressor, and I plan on using VN style 20rnd mags.

[Ross]

Originally Posted by deadlydayne

Ok so parts went to anodizing today with about 3000 RC parts. So they said 2 weeks max on anodizing. *small update*

Also Ross, I remember you mentioning somewhere you'r Scar is a DMR. Would you mind posting some pics for me. What tbb you have in it, what outer barrel. where you bought them ect ect. Im lookin to build mine in DMR form also and Im not sure wich tbb to use, the m14, or the RA tech "WE Long tbb 510mm" and I cant seem to find an outer barrel thats around 15-20" I would like to build it without a mock suppressor, and I plan on using VN style 20rnd mags.

I can only post pictures of the gun in pieces, as I have nothing to hold it together. I have the basic outline of it in my signature, though. I have the ra-tech m14 precision inner barrel in it. It worked for the 2 mags that it lasted for, but further tests have yet to be completed. You have to get a long ass suppressor on it and a barrel extension if you want that length. The barrel extension can be bought from airsoftbuddy, but you can use most 14mm threaded adapters (like the ones found on m4's). I tried to use a regular scar H flash hider with the twist on suppressor but the inner barrel sticks out an inch past the suppressor. I heard that the open bolt system can take aeg barrels. Not 100% on that, but it would be nice. http://www.wgcshop.com has a lot of outer barrels for sale. I was going to get one of theirs, so I can also can skip the big ugly suppressor look, but all they had in stock were 14mm+ instead of 14mm-. I've also been looking for the pmc black out style flash hider, but it has since vanished off the face of the earth. Out of stock everywhere.

[deadlydayne]

Yea I too have been thru wgc. That's why I asked about the inner barrel, they have two listed... The m14 or the ra tech "we long 510mm tbb" so I wasn't sure if the second one would work with the open bolt. I emailed wgc about it and about a couple outer barrel extensions so I guess I shall have to wait and see. There's an outer barrel extension that almost looks like the cheyenne tactical M200 if its long enough it might look good, idk we will see I guess

[CaptainMurphy]

I had to join the forum just for this post! I am a GBBR user for the WA platform and ended up getting a WE SCAR Closed Bolt as a trade since it has a broken #27 part. Could you please send me information on acquiring one of these wonderful items?

I too am going for a DMR build on this platform and would love to take care of this issue right away. I've got both a lathe and a mill and was dreading the process of making this part by hand (no CNC fancy stuff for me, lol).

[deadlydayne]

Sorry Murph sold out of the ones I made, I do however have plans of making more very soon...

[Ross]

Ouch!

[deadlydayne]

I know worse timing.... But there is a silver lining.... more will be made very soon =)

[Ross]

You should find other countries that have airsoft forums and start all over again. Bet you could make more from uk folk.

[deadlydayne]

That is the plan, then hopefully start poppin into some distributors so I wont have to surf a million forums.

[Eeyore]

Originally Posted by deadlydayne

That is the plan, then hopefully start poppin into some distributors so I wont have to surf a million forums.

CaptMurphy can have one of the two you made for me. I wanted a spare but my primary concern is getting the gun up and worry about spares later.