M4/M16 Thread

[Huron]

Originally Posted by MaybeStopCalling

The SFW profile is retardedly heavy. I just got a HD steel barrel mated to an aluminum extension and it's very front heavy even with handguards. I can see why they don't mount 203s on them.

It would feel heavy if you're used to aluminum airsoft barrels, yeah. I had a steel SFW barrel on my first AEG until I got the GBBR several years later. I made a habit of only getting steel on my airsoft, and I got a Norinco M1A clone before the AR (RS), so it feels pretty light by comparison.

[manoy385]

Originally Posted by Wilkie

The reason I ask is that I'm interested in a MAGpul PTS UBR in the future. I assume it will work on any aeg as there's nothing on the site saying it won't, but I thought I'd ask the experts.

My acm UBR came with 2 buffer tubes, one for aeg and one for gbb. It also came with 2 butt pads and 2 cheek pieces. I compared it to the genuine PTS UBR at my local airsoft store and couldn't tell the difference so I would advise you to get the acm version to save some cash. You can see a picture mine a page back.

[Wilkie]

Originally Posted by manoy385

My acm UBR came with 2 buffer tubes, one for aeg and one for gbb. It also came with 2 butt pads and 2 cheek pieces. I compared it to the genuine PTS UBR at my local airsoft store and couldn't tell the difference so I would advise you to get the acm version to save some cash. You can see a picture mine a page back.

Cool, thanks for the heads up. What site did you get yours from?

[manoy385]

Originally Posted by Wilkie

Cool, thanks for the heads up. What site did you get yours from?

dhgate. It's about $56 USD with free shipping.

[Wilkie]

Damn, not to shabby! Saving like $125 on a good day!

[phloudernow]

Originally Posted by turok_t

Prime WA China Doll/VLTOR Receiver Set (Limited Edition)
Prime ambi magazine catch
Prime ambi selector switch
Prime barrel extension
Prime steel WA M4 bolt carrier w/G&P negative pressure nozzle
RS Magpul UBR stock
RS Magpul MOE K grip
RS Centurion arms 10" rail
Viper Tech hammer/spring
Viper Tech disconnector/sear
Viper Tech AR15 buffer/spring
Viper Tech steel bolt carrier
Viper Tech CQB steel outer barrel
AABB bolt catch assembly
Iron Airsoft hop up chamber set
Iron Airsoft auto sear

Awesome Cakes, Did that China Doll Reciever Cost you a pretty penny?

My brother did a China Doll Build a few years ago :P

I posted it up a while ago :P

http://airsoftcanada.com/showthread....ght=china+doll

[localfreerider]

Originally Posted by R.A.T.M._JLD

I think you're doing it wrong.

you sir are 100% correct

DERP

[R.A.T.M._JLD]

Originally Posted by localfreerider

http://i.imgur.com/fe1vJQa.jpg
Hephaestus steel trigger unit (more trouble than I though)
FG high speed buffer (650 to 700 RPM)
FG low flow system (very consistent 300 or so FPS)
RA-Tech wood handguard (bought without gimpy grip)
RS bakelite grip (custom fit with wood guide block to give proper alignment, very secure with no play front to back or side to side)
Lightly weathered to make it look like it came strait from the sand box.

I think you're doing it wrong.

[turok_t]

Originally Posted by phloudernow

Awesome Cakes, Did that China Doll Reciever Cost you a pretty penny?

My brother did a China Doll Build a few years ago :P

I posted it up a while ago :P

http://airsoftcanada.com/showthread....ght=china+doll

Sigh.. lets just say that it costs as much as one of my arms

[Wilkie]

http://www.torontoairsoft.com/King-A...le_p_3056.html

Think I'm going to pick this fella up and do some modding to it. Different RIS, stock, internals.

What do you peoples think that grip would look like in front an UBR stock? I'm torn. I would perhaps trade it for a different grip, though I'm going to weigh weather it's worth it to buy this rather than something more stock after what I'm going to do to it

[manoy385]

Originally Posted by Wilkie

http://www.torontoairsoft.com/King-A...le_p_3056.html

Think I'm going to pick this fella up and do some modding to it. Different RIS, stock, internals.

What do you peoples think that grip would look like in front an UBR stock? I'm torn. I would perhaps trade it for a different grip, though I'm going to weigh weather it's worth it to buy this rather than something more stock after what I'm going to do to it

If you're going with that gun you should consider the PRS stock to fit the sniper theme. It's only $25 more than a UBR.

[Wilkie]

I was thinking about that. I'll see what I feal like when it happens. Probably have to wait for Christmas bonuses.

I think I will drop that grip come to think of it. Might just go with a MAGpul grip

[Wilkie]

Never mind, since I'd be replacing every part on there other than the barrel (which I would probably be tempted to change anyway to run a flash hider) I'll probably just start with a basic KA m4 platform.

[e-luder]

Originally Posted by turok_t

Prime WA China Doll/VLTOR Receiver Set (Limited Edition)
Prime ambi magazine catch
Prime ambi selector switch
Prime barrel extension
Prime steel WA M4 bolt carrier w/G&P negative pressure nozzle
RS Magpul UBR stock
RS Magpul MOE K grip
RS Centurion arms 10" rail
Viper Tech hammer/spring
Viper Tech disconnector/sear
Viper Tech AR15 buffer/spring
Viper Tech steel bolt carrier
Viper Tech CQB steel outer barrel
AABB bolt catch assembly
Iron Airsoft hop up chamber set
Iron Airsoft auto sear

We gonna see this soon, T?

[turok_t]

Originally Posted by e-luder

We gonna see this soon, T?

Eluder!!! Where have u been? I haven't spoken to u in forever!