Vfc mp7 aeg

[JKxWKW]

If you run a spiritus micro or something that can take inserts, you can look into the twinfalcon smg inserts for like 15$, they fit 4 mp7 mags perfectly.

I bought a 208mm inner and Maple leaf 60 but haven't had the opportunity to swap them in yet.

[Polskadude]

Best Magazine pouches that I've found are the ESSTAC KYWI, designed for the CZ Scorpion, but work perfect with the MP7.
They use a Kydex insert for retention.

https://www.esstac.com/product-page/...h-kywi-pouch-1

[cbcsteve]

For those who have owned the VFC MP7 AEG for quite some time.

Any issues thus far? I've heard those who have downgraded their spring to shoot around 330 FPS on 0.20g haven't run into any breakages.

[Matula]

Perso mine was fine, no problem except with one mag (feeding issue, spring problem).
But again, it's me and I downgraded the spring to be sure I was not stressing the gears.

[Freeze]

I got less than 3 mags out of mine before it shat the fan.

I even downgraded the spring to get it shooting 340 ish.

Has been at a techs ever since waiting on parts...

I'm definitely going to be selling it off once I get it back.

[Matula]

The big problem is coming from the proprietary parts.
Where did you get your MP7? No warranty?

Perso, I imported myself from WGCshop (HK).

Originally Posted by Freeze

I got less than 3 mags out of mine before it shat the fan.

I even downgraded the spring to get it shooting 340 ish.

Has been at a techs ever since waiting on parts...

I'm definitely going to be selling it off once I get it back.

[Freeze]

Originally Posted by Matula

The big problem is coming from the proprietary parts.
Where did you get your MP7? No warranty?

Perso, I imported myself from WGCshop (HK).

Airsoft Depot. Their customer service is less than stellar let's just say.

[Matula]

What was the issue exactly? I pretty sure you can contact WGCshop or RedWolf to get the part or directly with VFC, they are really good on warranty issues.

Originally Posted by Freeze

Airsoft Depot. Their customer service is less than stellar let's just say.

[Freeze]

Ended up getting the parts direct from vfc but man I'm not having a good experience right now.

[kyle milliken]

Originally Posted by Freeze

Ended up getting the parts direct from vfc but man I'm not having a good experience right now.

From what the vfc owner's page says no one is. Well it's nice to have small form factor AEG's, vfc has a lot of quality issues with the design.

I'm guessing one of the parts that broke was the gear with all the plastic on one side?

[Freeze]

Gears are fine. Piston exploded and one of the microswitchchip bits did too.

[kyle milliken]

Originally Posted by Freeze

Gears are fine. Piston exploded and one of the microswitchchip bits did too.

oof, piston, thats not a common one but the micro switches break like crazy from what the vfc page says. now that you got the parts hopefully you'll get it up and running

[cbcsteve]

Looks like from the Facebook VFC Owner's Group. One of the more common problems is this plastic piece on the gear that engages the Piston.

If your gun still functions and shoots but BBs are not feeding. It is most likely that little plastic piece got cracked in two. You purchase can apparently purchase them from VFC directly.

[cbcsteve]

VFC MP7 AEG Replacement Parts

For those looking for parts to replace whatever breaks in this too early of a release VFC MP7 AEG. You can email VFC's customer service and they will send you a PayPal link and a Google form to fillout what parts you need.


BBs not feeding?
It seems part 06-17 has a high chance of breakage. You will know it is broken if you hear a little rattling in your Gearbox and if your gun is shooting but the BBs are not feeding. Make sure to stop test firing at this point cause with that plastic piece from part 06-17 still rattling around it could jam up your gears or break your tappet plate.

[BestFriend Kev]

I've actually always wanted to own one but they are super expensive.