MadBull Ultimate Hopup released today

[Huron]

Originally Posted by Swatt Five-Six

would love to know if anyone else has had this happen, was thinking of getting one for my M4, but if it makes a jump in fps like that, I would not be able to use my gun on most fields as it would be well over 400fps (already doing about 375). Plus, I was poking around for some reviews and came across a board in the US, the name of the board escapes me right now, but some was saying that they had to mod their bodies with some brands of AEGs to get it to fit, and even going as far as to say that Madbull was making a body that this hop up was ment for, that it wasn't ment for other aeg bodies.

It works in any TM style uppers as far as I know. I didn't have to modify anything to install mine in the G&G.

[SINN]

TM plastic bodies require a TM two piece hop up, or you have to modify them to accept a one piece.

[shiftsup]

Originally Posted by shiftsup

Today I installed the Madbull Ultimate Hop Up into my completely stock CA XM 177 E2. Prior to installation this AEG's FPS was chronied at approximately 330 FPS. With the Ultimate Hop Up Unit installed the FPS was chronied at approximately 400 fps.

Has anyone else experienced this significant increase in muzzle velocity?

I am going to assume that my LNIB XM had an air seal issue that was causing the 330 fps that was corrected when this new hop up unit was installed. There's no way that two O rings alone are going to make a 20% increase in muzzle velocity.

[Huron]

Originally Posted by SINN

TM plastic bodies require a TM two piece hop up, or you have to modify them to accept a one piece.

My mistake, I guess G&P is an acceptable standard instead?

[techobo]

I'm having a hard time picturing where the extra plugs and wires are supposed to fit. Also, I wonder if this will work if using a FET.

[DarkAngel]

Originally Posted by techobo

I'm having a hard time picturing where the extra plugs and wires are supposed to fit. Also, I wonder if this will work if using a FET.

Through the mechbox perhaps? Those of us using a different gauges of wiring might have an issue with that however.

Mosfet shouldnt be affected by this at all. Theres no reason for it to be.

[Crunchmeister]

Originally Posted by shiftsup

I am going to assume that my LNIB XM had an air seal issue that was causing the 330 fps that was corrected when this new hop up unit was installed. There's no way that two O rings alone are going to make a 20% increase in muzzle velocity.

Actually, 310-320 fps is the stock velocity for CA Armalites out of the box. Such a jump in velocity is quite perplexing.

That being said, I've had several guns where simply replacing the hopup sleeve with a Guarder Clear has jacked my velocity 15-30 fps.

[techobo]

Originally Posted by DarkAngel

Through the mechbox perhaps? Those of us using a different gauges of wiring might have an issue with that however.

Mosfet shouldnt be affected by this at all. Theres no reason for it to be.

Ya, I guess so. It just seems like it'll be a really tight fit. For all the front wired guns especially. I guess it works if they made it already. I hope they release the tracer unit soon. I'd like to see it in action

[DarkAngel]

It is released. Redwolf has em for months already. I am however begging duy from airsoft parts to carry em.

[shiftsup]

Originally Posted by DarkAngel

It is released. Redwolf has em for months already. I am however begging duy from airsoft parts to carry em.

I purchased mine off of Duy 2 weeks ago.

[SINN]

Originally Posted by GabeGuitarded

My mistake, I guess G&P is an acceptable standard instead?

yeah for sure.

[DarkAngel]

The complete unit with the tracer? Thats what im talking about.
Everyone has the regular non Tracer unit. Only redwolf carries the Tracer unit version.

[StrikeFreedom]

While trapping the BBs is a good idea, a friend has this unit but has to flip the gun upside down to fire the remaining BBs at the end.

I don't mind dropping a few BBs, but very much prefer knowing when the magazine is out. Right now I have to shoot at the wall/ground or try to listen for dry firing.

[cbcsteve]

No need to beg anymore Duy IS getting them soon

I got the non tracer version, the air seal on this gun dramatically improved my shots.
Combine it with a Shredder Concave and a Guard Hop up you'll notice your groupings become tighter

[Baows]

I read the first 2 pages and it got to where people were talking about not having the o-ring on there? The chamber lock (bottom o-ring) is optional and does not actually have to be on there.

I picked one of these up from Capital Airsoft, and it's perfect.



~ Josh