Tanio Koba / KJW M4 GBBR Basic Information and FAQ

audi_bhoy · September 1st, 2012, 20:51

Nice build!! IMO the stock would look nicer with a Magpul PTS PRS stock as it's a DMR style M4 !!

Cj Radge · September 2nd, 2012, 14:33

Thanks Audi. I am swapping between two uppers. One SPR in that picture and another MK18 for CQB. So I decided to stick with the ACS stock. I has a nice cheek weld and the compartments are really useful =)

Saberwing · September 2nd, 2012, 15:27

That looks awesome CJ, I've been wanting to do the same for a while. I think you've just inspired me to actually follow through with the plans.

Sgt Niov · September 9th, 2012, 10:22

hi,
anyone know why i crank the charging handle, my v2 bolt doesnt return all the way in?
he is jamming half way. First, i thought it was the hop up wheel for adjustment, but no.
And when i insert a new mag, sometimes it doesnt stay in. and when i finally able to put in a mag, the bolt doesnt go back when firing or cranking the charging handle.
ty

Rommen · September 9th, 2012, 12:46

Quote:

Originally Posted by Sgt Niov

hi,
anyone know why i crank the charging handle, my v2 bolt doesnt return all the way in?
he is jamming half way. First, i thought it was the hop up wheel for adjustment, but no.
And when i insert a new mag, sometimes it doesnt stay in. and when i finally able to put in a mag, the bolt doesnt go back when firing or cranking the charging handle.
ty

I had both of the problems you described when I first got my V2 bolt. The mags not inserting fully seemed to work itself out, for now just pull the bolt back before you put the magazine in and it will work fine. As for the nozzle getting stuck halfways, mine would do this every magazine when I first got it. Now it only rarely does it and it doesn't affect performance, other than 'locking' your bolt catch which makes you pull the charging handle to release the bolt. Just keep the nozzle well lubed. I have yet to find a cause for these problems.

audi_bhoy · September 9th, 2012, 16:21

I remember that I noticed the little nub pushing the BB from the magazine into the hop-up chamber was slightly longer on my V2 bolt when I first had it. Now that the season is almost over, I'm gonna do some more testing to know why my V2 bolt had been such a pain, I ran my V1 all summer instead.

EDIT: Had some spare time, and a Madbull 6.01mm x 509mm laying around since 6 months, decided I could mod it to fit into the KJW hop-up system

Now I just gotta find myself a 150mm silencer to hide this hehe !!

Saberwing · September 9th, 2012, 20:13

Quote:

Originally Posted by Sgt Niov

hi,
anyone know why i crank the charging handle, my v2 bolt doesnt return all the way in?
he is jamming half way. First, i thought it was the hop up wheel for adjustment, but no.
And when i insert a new mag, sometimes it doesnt stay in. and when i finally able to put in a mag, the bolt doesnt go back when firing or cranking the charging handle.
ty

It could be that your BB follower that runs between the feed lips of your magazine is a touch larger then your V1. I had a similar problem when I got new magazines.

Sgt Niov · September 9th, 2012, 20:31

Hi.
The follower is the same size as my v1 bolt. I replaced the v2 by my v1 and it shoot great. I got a ra-tech blue bucking and when I turn on my hop up unit slightly, the Bbs are jamming. So I must turn completely off my hop up. But now, at least , my bolt is working and I can shoot straight BBS instead of seeing seeing them go down.

audi_bhoy · September 12th, 2012, 20:08

Just finished my DMR build on my KJW M4, here's some specs and pictures !!

Externals:
-Full metal KJW M4
-Madbull Viking Tactics 13" Free float rail
-4x32 illuminated scope
-Magpul PTS PRS stock (custom fit)
-150mm silencer
-G&P stubby grip

Internals:
-V2 KJW Bolt
-Cradle airsoft velocity reducer
-RA-Tech blue hop-up rubber
-Madbull 6.01mm x 509mm tighbore (custom fit)

beanie · October 1st, 2012, 08:47

Nice build Audi. How far does that shoot with accuracy?

For the people buying new uppers from kjw, how much did it come out to/was there any discount? My upper is broken where the front pin goes through it, most likely from holding the grip when tightening the delta ring. I will be holding the upper receiver instead from now on.

audi_bhoy · October 1st, 2012, 19:10

Haven't been able to fully adjust and test the hop up, V2 bolt giving me headaches again... Waiting on Cradle to reply me on their version of the BC, seems it will be V1 based...

audi_bhoy · October 2nd, 2012, 01:05

Cradle just uploaded the new bolt carrier group they will be releasing soon, for those interested !!

http://www.cradleairsoft.com/shop/v1bcg

beanie · October 2nd, 2012, 12:20

Seems a little pricey.

Styrak · October 2nd, 2012, 12:50

I guess when you're the only player in the game, you can charge whatever you want!

audi_bhoy · October 2nd, 2012, 13:23

Yeah, for my part I will be going with a new V2 instead, and will run the V1 in the meantime.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 2nd, 2012, 14:33	#812
Cj Radge Trader rating Join Date: Sep 2011 Location: Philippines, Manila	Thanks Audi. I am swapping between two uppers. One SPR in that picture and another MK18 for CQB. So I decided to stick with the ACS stock. I has a nice cheek weld and the compartments are really useful =) __________________ Unseen but Certain

September 2nd, 2012, 15:27	#813
Saberwing Trader rating Join Date: Mar 2007 Location: London, ON	That looks awesome CJ, I've been wanting to do the same for a while. I think you've just inspired me to actually follow through with the plans. __________________ KJW Mk18 MOD1 BLOCK 2 - Well VSR-10 - Les Baer Ultimate Recon

September 9th, 2012, 16:21	#816
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	I remember that I noticed the little nub pushing the BB from the magazine into the hop-up chamber was slightly longer on my V2 bolt when I first had it. Now that the season is almost over, I'm gonna do some more testing to know why my V2 bolt had been such a pain, I ran my V1 all summer instead. EDIT: Had some spare time, and a Madbull 6.01mm x 509mm laying around since 6 months, decided I could mod it to fit into the KJW hop-up system Now I just gotta find myself a 150mm silencer to hide this hehe !! Last edited by audi_bhoy; September 9th, 2012 at 19:19..

September 1st, 2012, 20:51	#811
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	Nice build!! IMO the stock would look nicer with a Magpul PTS PRS stock as it's a DMR style M4 !!

September 9th, 2012, 10:22	#814
Sgt Niov Trader rating Join Date: Jul 2012 Location: Boisbriand, Québec. Canada	hi, anyone know why i crank the charging handle, my v2 bolt doesnt return all the way in? he is jamming half way. First, i thought it was the hop up wheel for adjustment, but no. And when i insert a new mag, sometimes it doesnt stay in. and when i finally able to put in a mag, the bolt doesnt go back when firing or cranking the charging handle. ty

September 9th, 2012, 20:31	#818
Sgt Niov Trader rating Join Date: Jul 2012 Location: Boisbriand, Québec. Canada	Hi. The follower is the same size as my v1 bolt. I replaced the v2 by my v1 and it shoot great. I got a ra-tech blue bucking and when I turn on my hop up unit slightly, the Bbs are jamming. So I must turn completely off my hop up. But now, at least , my bolt is working and I can shoot straight BBS instead of seeing seeing them go down.

September 12th, 2012, 20:08	#819
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	Just finished my DMR build on my KJW M4, here's some specs and pictures !! Externals: -Full metal KJW M4 -Madbull Viking Tactics 13" Free float rail -4x32 illuminated scope -Magpul PTS PRS stock (custom fit) -150mm silencer -G&P stubby grip Internals: -V2 KJW Bolt -Cradle airsoft velocity reducer -RA-Tech blue hop-up rubber -Madbull 6.01mm x 509mm tighbore (custom fit)

October 1st, 2012, 08:47	#820
beanie Trader rating Join Date: Apr 2011	Nice build Audi. How far does that shoot with accuracy? For the people buying new uppers from kjw, how much did it come out to/was there any discount? My upper is broken where the front pin goes through it, most likely from holding the grip when tightening the delta ring. I will be holding the upper receiver instead from now on.

October 1st, 2012, 19:10	#821
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	Haven't been able to fully adjust and test the hop up, V2 bolt giving me headaches again... Waiting on Cradle to reply me on their version of the BC, seems it will be V1 based...

October 2nd, 2012, 01:05	#822
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	Cradle just uploaded the new bolt carrier group they will be releasing soon, for those interested !! http://www.cradleairsoft.com/shop/v1bcg

October 2nd, 2012, 12:20	#823
beanie Trader rating Join Date: Apr 2011	Seems a little pricey.

October 2nd, 2012, 12:50	#824
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	I guess when you're the only player in the game, you can charge whatever you want! __________________ Airsoft Sales and Repair/Upgrade Services

October 2nd, 2012, 13:23	#825
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	Yeah, for my part I will be going with a new V2 instead, and will run the V1 in the meantime.

Tanio Koba / KJW M4 GBBR Basic Information and FAQ

Airsoft Guns Discussion