|
|
July 18th, 2008, 11:30
|
#76 |
|
Mananged to get the grip attached. Still needds work but heres the updated progress. I think the front exces will be removed, then the back of the mini launcher ground down. After that i may used the excess front section to fit towards the rear. The gap behind the Launcher is essential as this will be a section where electronics and solenoids will be housed for teh electronic fire controls.
I've not worked out how i'm going to cope with the front yet, as even when its trimmed flush to the front some space will be needed for the launcher to tip up for loading. The origional M203 grip had the semi-circle cut away (i think its where it clicks in to the origional launcher) which was ideal for placing around the mini launchers release pin. I'm tempted to make a new release pin that sits slightly lower down to make it easier to open, not that its difficult anyway. PS- Current Weight is 4.8kg..... Without ammo, box mag, steel stock and bodywork, not upper rail system. no electronics, no electronics power supply and switches etc. Crap...... See what you think to progress! comments and ideas always welcome as with a propject this large its easy to miss things!     
Last edited by Marriott; July 18th, 2008 at 11:45.. |
|
|
|
|
July 18th, 2008, 14:48
|
#77 |
|
looks like its really coming together man, keep us updated.
__________________
|
|
|
|
|
July 18th, 2008, 14:50
|
#78 | |
|
looks like its coming along pretty well
keep updating lol
__________________
Quote:
|
|
|
|
|
|
July 21st, 2008, 00:22
|
#79 |
|
Hawt damn. I gave up reading on page 3 and just looked for pictures. Too many big words going over my head. All in all, it's a sexy beast and it'll be one gorgeous mofo when it's done. I was considering undertaking some sort of super mod like this, but after readign this, I'm definately not ready for it. Good luck with that, I can't wait to see it when it is done.
__________________
G19 Out of Sport. Have Fun! |
|
|
|
|
July 21st, 2008, 09:43
|
#80 |
|
Ok, i know these are crap but they took me 2 mins tops to make just to figure out im up the "brown avenue" as this section is not as simple as i origionally hoped for.
  This could be a royal pain! I have found Blank Weaver Mount Extrusions though... http://cgi.ebay.com/ws/eBayISAPI.dll...ayphotohosting Any ideas? |
|
|
|
|
|
July 21st, 2008, 11:52
|
#81 |
|
What is the useful point of mounting rails like that, and also wouldn't that block your sighting lines to mount stuff over your sight like that?
|
|
|
|
|
|
July 21st, 2008, 13:24
|
#82 | |
|
Quote:
But as mentioned its mainly just for the look based on the origional design. It's also not a massive lift up and line up your enemy being its more of a support gun. Last edited by Marriott; July 21st, 2008 at 13:27.. |
||
|
|
|
|
July 21st, 2008, 14:55
|
#83 |
|
That looks like it could be easily done if you're able to find some steel rails and are able to weld.
3 angled cuts then just weld 'em back together, then attach it to a G36 optic carry handle. |
|
|
|
|
July 22nd, 2008, 12:11
|
#84 | |
|
Quote:
Little update.... I had an accident with my bank card. It decided to Order a MadBull XM108HP CO2 Grenade  Then it was polite in letting me know it had done it I thoguht about the XM204HP for the WOW factor for that many bb's but i figured i would try the Limited edition XM108HP to save on ammo and to gain increased power allocated to each bb over the 204 edition. I've found a youtube video with the XM204HP shooting 37 Meters!!!! with 0.25's so i'm guessing the 108 edition at the same pressure will have even greater range! I plan on getting the XC03 Madbull CO2 refill station but that will have to wait a little while as combined these are not cheap lol. I wanted to order the grenade now because i know the 108 is a limited edition as far as i have found out. Should be here in the morning. but unfortunatly after last weekend i now have no ammo or gas ...I threw a cheapo speed loader on the order too.Lots of drooling forcast for tomorrow when it arrives..... |
||
|
|
|
|
July 22nd, 2008, 14:06
|
#85 |
|
|
You need to find a some one that has access to a TIG welder to weld aluminum
|
|
|
|
|
July 23rd, 2008, 13:56
|
#86 |
|
Update
Mad Bull XM108HP Arrived today!!! - Drool..... Also here are some new renders for concept rail system, these had the actual gun photo based behind when rough modeling so they should be in proportion approx. The concept is to have the scope/optics slot in to the back to allow interchanges if needed. This means that the upper scope rails would not need to be relied upon and will also help on less complex construction with height tolerences.   
Last edited by Marriott; July 23rd, 2008 at 13:59.. |
|
|
|
|
|
July 23rd, 2008, 14:05
|
#87 |
|
Interesting man, I like it, creative.
|
|
|
|
|
August 15th, 2008, 17:28
|
#88 |
|
Sorry for the delay all.... I've had a fairly large contract come up so all my times been producing that hence the delay!
However i have a favour to ask... I've had a set back. With all the connecting and disconecting of the motor one of the terminals has broken.. I've spent ages looking online but there are sooo many electrical connector types avaliable its impossible to find them with generic key words. I know they are a crimp style. But does anyone know the name? I need to buy the crimp tool and some of the connectors i thnk but its the name i need so i can find the parts to buy! Many thanks! |
|
|
|
|
|
August 15th, 2008, 18:29
|
#89 |
|
__________________
  Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur. |
|
|
|
|
August 16th, 2008, 10:19
|
#90 | |
|
Quote:
|
||
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
