This is an PTW thread

TokyoSeven · October 31st, 2008, 07:54

Quote:

Originally Posted by mcguyver

You cheated. You put sling on that gun!!!

That's my basement bathroom. Imagine tile on the slab, in Alberta in winter.

Needless to say you wear socks if you value your feet in there.

Oh yeah I can see the toes gettin a little chilly! My bathrooms in the basement too and Sask winters are about as unfriendly. I dream of redoing the floor someday but its just so much work and we finally just got the shower installed and the vanity is still being set up. Anyways enough about the bathroom! I could have taken my stock off but shes a single point attached at the back of the reciever on a ring held on by the stock! I suppose I could take the 2 minutes to grab a screw driver and remove it but that defeats the purpose of being lazy!

Im also jealous that you have a shower door, we just have a curtain for now. Home depot is out of the door I like. Those bastards.

Cortexburn · October 31st, 2008, 08:19

Just wondering, were those on the scales with the battery in or out?

My non PTW came in at 9.6 pounds, but that was with out a magazine or battery. It's got the SPR front end and bipod, it's no carbine....

TokyoSeven · October 31st, 2008, 08:34

Quote:

Originally Posted by Cortexburn

Just wondering, were those on the scales with the battery in or out?

My non PTW came in at 9.6 pounds, but that was with out a magazine or battery. It's got the SPR front end and bipod, it's no carbine....

Mine was with battery and mag, empty mag but with mag.

Oz · November 2nd, 2008, 23:18

Finally got some new goodies to slap on. Just some small details but I havnt gotten the gear out of the closet in far too long. Still some work to go but they're getting there. All CF based and needing paint.. If its on there its real, no copies.

I put a new full length barrel on today to replace the previous one that had its threads damaged in transit. I was surprised to find it only had a carbine length inner unlike the damaged barrel. Anyone else have issues with this, or have they just changed production since I last checked (a wile ago).

mcguyver · November 2nd, 2008, 23:22

Systema stopped production of the M16 cylinders in 2006 (pre-MAX), so all cylinders now are for use with M4/CQB-R inner barrels.

Get a PDI 509mm barrel for PTWs. I have one, nice unit. And I gained 30 fps going to it over M4-length, and another 10-12 fps going to a reinforced real upper.

Ronan · November 3rd, 2008, 02:42

Quote:

Originally Posted by The Acer

Btw mate someone beat you to it with an AK

JoeyJackhammer · November 3rd, 2008, 19:19

I guess by some weird turn of events, King Arms made more then one to turn a profit. Crazy...

Oz · November 3rd, 2008, 21:28

Whats the ID on the PDI barrel? The damaged systema barrel I have is the 6.04 with the steel outer. Given that its here I'd love to just swap it out if I can get my hands on a 14mm die. Just picked up a universal thread restorer but the damned thing wont work as the barrel is thicker after the threads. Probably for the better, thing looked like a piece of crap anyhow. Short of that there's always wet sanding the inner to fit in the proper outer. Damn, there's so much more stuff out there for PTW's these days, I've had my head out of the game for way too long.

mcguyver · November 3rd, 2008, 22:26

Oz, get a metric thread file. All you need is the 1.00mm pitch anyways, and they cost about $15 or so.

I didn't need to do any mods to fit the PDI in my M16, and this was the Gen 1 aluminum outer barrel as well. I would venture to guess that PDI's 6.04mm may really be 6.035mm, but I don't have the precision in my calipers to measure that small.

TokyoSeven · November 4th, 2008, 05:46

Quote:

Originally Posted by JoeyJackhammer

I guess by some weird turn of events, King Arms made more then one to turn a profit. Crazy...

Well...we know that they made atleast three of them.

I still like my laylax one more.

swatt13 · November 4th, 2008, 10:03

is the extreemly rediculously long silencer suppose to say something?

TokyoSeven · November 4th, 2008, 10:21

Quote:

Originally Posted by swatt13

is the extreemly rediculously long silencer suppose to say something?

Of course not!

It may not be that long but it sure is skinny!

Styrak · November 4th, 2008, 11:52

Oh god Tokyo what have you done.

damage · November 11th, 2008, 15:14

Bought it off from a teamate.

wey ferro · November 11th, 2008, 21:35

oz has the best one so far

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 31st, 2008, 08:19	#107
Cortexburn Miserable Bastard Trader rating Join Date: Nov 2000 Location: Red Deer, Alberta	Just wondering, were those on the scales with the battery in or out? My non PTW came in at 9.6 pounds, but that was with out a magazine or battery. It's got the SPR front end and bipod, it's no carbine.... __________________ My Buy/Sell Rating. “We cannot defend freedom abroad by deserting it at home.” Thomas Jefferson I hate Ghillie suits. Socialism SUCKS www.unisevil.com

November 2nd, 2008, 23:22	#110
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Systema stopped production of the M16 cylinders in 2006 (pre-MAX), so all cylinders now are for use with M4/CQB-R inner barrels. Get a PDI 509mm barrel for PTWs. I have one, nice unit. And I gained 30 fps going to it over M4-length, and another 10-12 fps going to a reinforced real upper. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

November 3rd, 2008, 19:19	#112
JoeyJackhammer Trader rating Join Date: Jun 2004 Location: Moose Jaw, SK	I guess by some weird turn of events, King Arms made more then one to turn a profit. Crazy... __________________

November 2nd, 2008, 23:18	#109
Oz Trader rating Join Date: Mar 2003 Location: Vancouver	Finally got some new goodies to slap on. Just some small details but I havnt gotten the gear out of the closet in far too long. Still some work to go but they're getting there. All CF based and needing paint.. If its on there its real, no copies. I put a new full length barrel on today to replace the previous one that had its threads damaged in transit. I was surprised to find it only had a carbine length inner unlike the damaged barrel. Anyone else have issues with this, or have they just changed production since I last checked (a wile ago).

November 3rd, 2008, 21:28	#113
Oz Trader rating Join Date: Mar 2003 Location: Vancouver	Whats the ID on the PDI barrel? The damaged systema barrel I have is the 6.04 with the steel outer. Given that its here I'd love to just swap it out if I can get my hands on a 14mm die. Just picked up a universal thread restorer but the damned thing wont work as the barrel is thicker after the threads. Probably for the better, thing looked like a piece of crap anyhow. Short of that there's always wet sanding the inner to fit in the proper outer. Damn, there's so much more stuff out there for PTW's these days, I've had my head out of the game for way too long.

November 3rd, 2008, 22:26	#114
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Oz, get a metric thread file. All you need is the 1.00mm pitch anyways, and they cost about $15 or so. I didn't need to do any mods to fit the PDI in my M16, and this was the Gen 1 aluminum outer barrel as well. I would venture to guess that PDI's 6.04mm may really be 6.035mm, but I don't have the precision in my calipers to measure that small. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

November 4th, 2008, 11:52	#118
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Oh god Tokyo what have you done. __________________ Airsoft Sales and Repair/Upgrade Services

November 11th, 2008, 15:14	#119
damage Trader rating Join Date: Jan 2005 Location: Port Coquitlam, BC	Bought it off from a teamate.

November 11th, 2008, 21:35	#120
wey ferro Trader rating Join Date: Dec 2004	oz has the best one so far __________________ www.ferroconcepts.com

This is an PTW thread

Airsoft Media