Grenade Launchers - Good, Bad or Stupid ?

Kuro_Neko · March 17th, 2009, 21:11

The CA m203 barrel mounts don't need that tinner section. In fact I had to wrap a bunch of electrical tape around mine to thicken it to the width of the regular barrel to get it to fit snugly.

Kuro_Neko

grimreefer · March 21st, 2009, 01:45

So I got my first and only shell today. A Madbull XM108HP.

I was wondering if someone had a technique to extract spent shells quickly? My launcher holds the shell back towards the trigger assembly as the chamber opens. This is great if you want to drop spent shells....not so great if you don't want to drop your $80 shells on concrete. My hands aren't big enough to hit the release button and grab the shell in one smooth movement.

lussier · March 21st, 2009, 02:45

where can i find one in canada, is it possible to get from somewhere else?

Duckman · March 21st, 2009, 02:55

Quote:

Originally Posted by grimreefer

So I got my first and only shell today. A Madbull XM108HP.

I was wondering if someone had a technique to extract spent shells quickly? My launcher holds the shell back towards the trigger assembly as the chamber opens. This is great if you want to drop spent shells....not so great if you don't want to drop your $80 shells on concrete. My hands aren't big enough to hit the release button and grab the shell in one smooth movement.

you're pretty much stuck with pointing the gun straight up at the sky and hope it doesnt fall out....or be fast enough that you can catch it on the way down. the inherant firing angle of a 203 should point it's barrel a bit backwards in this case and might hold it in place for you to grab.

shadow_matter · March 21st, 2009, 03:28

Have you considered installing a small magnet inside the top of the launcher? I was talking to a player last season who had the same issue, he drill tapped and glued in 2 of those 1/6" magnets flush to the underside of the top rail. (The magnets used to magnitize miniature models)

Quote:

Originally Posted by grimreefer

So I got my first and only shell today. A Madbull XM108HP.

I was wondering if someone had a technique to extract spent shells quickly? My launcher holds the shell back towards the trigger assembly as the chamber opens. This is great if you want to drop spent shells....not so great if you don't want to drop your $80 shells on concrete. My hands aren't big enough to hit the release button and grab the shell in one smooth movement.

surebet · March 21st, 2009, 03:35

Quote:

Originally Posted by lussier

where can i find one in canada, is it possible to get from somewhere else?

There are a few in the classifieds, but that involves getting age verified.

Drake · March 21st, 2009, 04:19

Quote:

Originally Posted by surebet

Quote:

Originally Posted by lussier

where can i find one in canada, is it possible to get from somewhere else?

There are a few in the classifieds, but that involves getting age verified..

Plus don't request stuff outside of classifieds, it will result in an infraction </warning>

grimreefer · March 23rd, 2009, 15:49

I have an Echo 1 barrel mounted long launcher, but it tends to rotate around the barrel more easily than I'd like. Is this common, or is there something to prevent this on other launchers?

Kuro_Neko · March 23rd, 2009, 19:43

I don't know how it works for other launchers but the CA one I have locks into the slip ring and is rock solid.

Kuro_Neko

-SWAT- · March 25th, 2009, 01:33

how does this stuff fair for cross boarder buying? same as a AEG? / GBB? i was looking at an AGX, really want to get one

Kuro_Neko · March 25th, 2009, 03:27

Can't get launchers or grenades across the border. But there's a couple of places that sell them local, grenades at least for sure, not sure about the AGX.

Kuro_Neko

MrEvolution · March 25th, 2009, 16:01

Quote:

Originally Posted by grimreefer

I have an Echo 1 barrel mounted long launcher, but it tends to rotate around the barrel more easily than I'd like. Is this common, or is there something to prevent this on other launchers?

Quote:

Originally Posted by Kuro_Neko

I don't know how it works for other launchers but the CA one I have locks into the slip ring and is rock solid.

Kuro_Neko

I have a CA launcher, on an ICS gun and mine used to wobble, I just wrapped a lot of electrical tape around the barrel lug thingy towards the receiver and the muzzle end and its fine now (except removing it is a biatch)

Kuro_Neko · March 25th, 2009, 21:57

Quote:

Originally Posted by MrEvolution

I have a CA launcher, on an ICS gun and mine used to wobble, I just wrapped a lot of electrical tape around the barrel lug thingy towards the receiver and the muzzle end and its fine now (except removing it is a biatch)

I found I had to use electrical tape at the muzzle end but the receiver end is rock solid. But then I have a CA launcher on a CA gun.

Kuro-Neko

Kesslan · March 31st, 2009, 14:50

So I've been shopping about for a launcher for my own rifle recently. The only thing is, I'm not quite sure what will properly fit it. I had to basically make my own rear mounting bracket for my TM M203, but i'm wanting one that actually uses a gas shell. It would be nice for one that can use the madbull shells too, though I find the madbull launchers themselves are.. ugly to say the least.

I presently have an ICS-20 A1.

I figgured I'd ask here since there's folk posting in this thread that clearly have more experience with them than I do by far :P

apmaman · April 5th, 2009, 13:53

what brand of ammo do you guys use for your grenades? I'm having trouble finding cheap BB's that arn't full of imperfections. I'm not looking for super high quality stuff but since the grenades use alot of ammo I want to keep costs to a minmum without jamming up the shells all the time.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 21st, 2009, 01:45	#122
grimreefer Trader rating Join Date: May 2008 Location: Victoria, BC	So I got my first and only shell today. A Madbull XM108HP. I was wondering if someone had a technique to extract spent shells quickly? My launcher holds the shell back towards the trigger assembly as the chamber opens. This is great if you want to drop spent shells....not so great if you don't want to drop your $80 shells on concrete. My hands aren't big enough to hit the release button and grab the shell in one smooth movement. __________________

March 23rd, 2009, 15:49	#128
grimreefer Trader rating Join Date: May 2008 Location: Victoria, BC	I have an Echo 1 barrel mounted long launcher, but it tends to rotate around the barrel more easily than I'd like. Is this common, or is there something to prevent this on other launchers? __________________

March 25th, 2009, 01:33	#130
-SWAT- Trader rating Join Date: Mar 2004 Location: Kingston, Ontario	how does this stuff fair for cross boarder buying? same as a AEG? / GBB? i was looking at an AGX, really want to get one __________________

March 17th, 2009, 21:11	#121
Kuro_Neko Trader rating Join Date: Aug 2008 Location: St. John's, Newfoundland	The CA m203 barrel mounts don't need that tinner section. In fact I had to wrap a bunch of electrical tape around mine to thicken it to the width of the regular barrel to get it to fit snugly. Kuro_Neko

March 21st, 2009, 02:45	#123
lussier Trader rating Join Date: Mar 2009	where can i find one in canada, is it possible to get from somewhere else?

March 23rd, 2009, 19:43	#129
Kuro_Neko Trader rating Join Date: Aug 2008 Location: St. John's, Newfoundland	I don't know how it works for other launchers but the CA one I have locks into the slip ring and is rock solid. Kuro_Neko

March 25th, 2009, 03:27	#131
Kuro_Neko Trader rating Join Date: Aug 2008 Location: St. John's, Newfoundland	Can't get launchers or grenades across the border. But there's a couple of places that sell them local, grenades at least for sure, not sure about the AGX. Kuro_Neko

March 31st, 2009, 14:50	#134
Kesslan Trader rating Join Date: Sep 2008 Location: High Level, AB	So I've been shopping about for a launcher for my own rifle recently. The only thing is, I'm not quite sure what will properly fit it. I had to basically make my own rear mounting bracket for my TM M203, but i'm wanting one that actually uses a gas shell. It would be nice for one that can use the madbull shells too, though I find the madbull launchers themselves are.. ugly to say the least. I presently have an ICS-20 A1. I figgured I'd ask here since there's folk posting in this thread that clearly have more experience with them than I do by far :P

April 5th, 2009, 13:53	#135
apmaman Trader rating Join Date: Apr 2009	what brand of ammo do you guys use for your grenades? I'm having trouble finding cheap BB's that arn't full of imperfections. I'm not looking for super high quality stuff but since the grenades use alot of ammo I want to keep costs to a minmum without jamming up the shells all the time.

Grenade Launchers - Good, Bad or Stupid ?

Airsoft Guns Discussion