Solved - Please delete/move

Eul0gy · December 25th, 2009, 21:54

Just bought this last Saturday; Was target shooting from inside my house into my woods, took a total of two shots (I only had two BBs in the magazine, which feeds extremely well right down to the last BB) both fired and then fired once more just to make sure there was nothing left and not a sound! Took it downstairs, changed batteries, tried three different new fuses and nothing

Blahh.

Any suggestions ?

SOLVED, PLEASE DELETE/MOVE

Boche · December 25th, 2009, 22:00

I'm not a gun doc, but aren't CAs notorious for having the wires disconnect from the motor?

Eul0gy · December 25th, 2009, 22:07

I think you are right, I am trying to be very cautious and take this apart right (It comes apart in like 5 or 6 main pieces..) but the "easy access" hop up and inner barrel is not easy at all, in fact, quite the opposite

Although, I am following the not so clear disassembly guide on YouTube..

Boche · December 25th, 2009, 22:12

Well, good luck, let us know how it turns out.

Eul0gy · December 25th, 2009, 22:32

Is there something I am missing when twisting off the barrel.. (I know which way it goes haha) There no actual instruction, just some guy taking the SVD apart. My roided out brotha tried and its not even budging!

YouTube- Exclusive CA Dragunov SVD **Part #1**

NVC · December 25th, 2009, 23:21

Just hold the gun between your knee's and hold the the front sight and hulk it to the left. Lefty loosey - righty tighty, Thats how I took my barrel apart.

Amos · December 26th, 2009, 01:17

Not sure about the CA, but the realsword has set screws hidden under the rear sight.

Also -- The gun could be semi-locked.

Also Also, you don't need to take the barrel off to get to the motor, you should be able to unscrew the bottom of the grip and peek in.

Eul0gy · December 26th, 2009, 01:35

RS SVD <3

What is semi locked?

Sorry.
The CA has a weird gearbox, it looks nothing like the RS one. It only goes into the grip like an inch. Whereas the RS one fills up the grip.

Amos · December 26th, 2009, 01:52

Oh.. hrm...

Semi locked is when a gun doesn't cycle far enough to trip the cut-off lever properly so the gearbox locks up.

When you pull the trigger do you hear ANY sound at all? (If it's semi-locked there would be a very slight clicking sound)

Eul0gy · December 26th, 2009, 02:00

Yes! Very slight clicking sound. No motor sounds though. What does one do when this happens?

Amos · December 26th, 2009, 02:08

Find your cut-off lever, hold it up and shoot, your gun should fire full auto, and that should be enough to re-set semi auto.

on a realsword you can attach the black wire to the battery, then run another piece of wire from the red to the battery red (bypassing the trigger to force it to shoot) Not sure if it'll work the same on the CA though.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 25th, 2009, 22:00	#2
Boche I am memel, hear me roar! Trader rating Join Date: Jul 2004 Location: Mt. Pleasant, On.	I'm not a gun doc, but aren't CAs notorious for having the wires disconnect from the motor? __________________ 76991693 The Shepherd always finds His sheep. The Flat Earth has me Levelled.

December 25th, 2009, 22:12	#4
Boche I am memel, hear me roar! Trader rating Join Date: Jul 2004 Location: Mt. Pleasant, On.	Well, good luck, let us know how it turns out. __________________ 76991693 The Shepherd always finds His sheep. The Flat Earth has me Levelled.

December 25th, 2009, 23:21	#6
NVC Trader rating Join Date: Jul 2009 Location: Edmonton	Just hold the gun between your knee's and hold the the front sight and hulk it to the left. Lefty loosey - righty tighty, Thats how I took my barrel apart. __________________ Custom Kydex Holsters - pm me for details

December 25th, 2009, 21:54	#1
Eul0gy Trader rating Join Date: Dec 2008 Location: Halifax, NS	Solved - Please delete/move Just bought this last Saturday; Was target shooting from inside my house into my woods, took a total of two shots (I only had two BBs in the magazine, which feeds extremely well right down to the last BB) both fired and then fired once more just to make sure there was nothing left and not a sound! Took it downstairs, changed batteries, tried three different new fuses and nothing Blahh. Any suggestions ? SOLVED, PLEASE DELETE/MOVE Last edited by Eul0gy; January 30th, 2010 at 17:55.. Reason: Solved

December 25th, 2009, 22:07	#3
Eul0gy Trader rating Join Date: Dec 2008 Location: Halifax, NS	I think you are right, I am trying to be very cautious and take this apart right (It comes apart in like 5 or 6 main pieces..) but the "easy access" hop up and inner barrel is not easy at all, in fact, quite the opposite Although, I am following the not so clear disassembly guide on YouTube..

December 25th, 2009, 22:32	#5
Eul0gy Trader rating Join Date: Dec 2008 Location: Halifax, NS	Is there something I am missing when twisting off the barrel.. (I know which way it goes haha) There no actual instruction, just some guy taking the SVD apart. My roided out brotha tried and its not even budging! YouTube- Exclusive CA Dragunov SVD Part #1

December 26th, 2009, 01:17	#7
Amos Trader rating Join Date: Aug 2006 Location: Japan	Not sure about the CA, but the realsword has set screws hidden under the rear sight. Also -- The gun could be semi-locked. Also Also, you don't need to take the barrel off to get to the motor, you should be able to unscrew the bottom of the grip and peek in. __________________ Custom Builds: FA3674U Krinkov G3SD6

December 26th, 2009, 01:35	#8
Eul0gy Trader rating Join Date: Dec 2008 Location: Halifax, NS	RS SVD <3 What is semi locked? Sorry. The CA has a weird gearbox, it looks nothing like the RS one. It only goes into the grip like an inch. Whereas the RS one fills up the grip.

December 26th, 2009, 01:52	#9
Amos Trader rating Join Date: Aug 2006 Location: Japan	Oh.. hrm... Semi locked is when a gun doesn't cycle far enough to trip the cut-off lever properly so the gearbox locks up. When you pull the trigger do you hear ANY sound at all? (If it's semi-locked there would be a very slight clicking sound) __________________ Custom Builds: FA3674U Krinkov G3SD6

December 26th, 2009, 02:00	#10
Eul0gy Trader rating Join Date: Dec 2008 Location: Halifax, NS	Yes! Very slight clicking sound. No motor sounds though. What does one do when this happens?

December 26th, 2009, 02:08	#11
Amos Trader rating Join Date: Aug 2006 Location: Japan	Find your cut-off lever, hold it up and shoot, your gun should fire full auto, and that should be enough to re-set semi auto. on a realsword you can attach the black wire to the battery, then run another piece of wire from the red to the battery red (bypassing the trigger to force it to shoot) Not sure if it'll work the same on the CA though. __________________ Custom Builds: FA3674U Krinkov G3SD6

Solved - Please delete/move

Doctor's Corner