|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
February 7th, 2010, 14:00 | #1 |
Which battery should I use?
Well, with my current set up ; Eg1000 + Guarder Sp120.
I wondered which battery would be the best to use. I know that the 9.6v 1400mAh I have currently do not last long, but have a nice rof and can pull the spring. Would be nice to know which one would be the best to buy. (AK47 type stock) Thank you. |
|
February 7th, 2010, 14:29 | #2 |
Can you give Nimh/nimc answeres and also lipo?
Thankyou
__________________
Con Murder Dark Rhino L.A. Airsoft |
|
February 7th, 2010, 14:32 | #3 |
I'll just tell you all about the current battery:
Intellect 9.6v 1400mAh Ni-Mh mini. They really don't last long. |
|
February 7th, 2010, 14:48 | #4 |
Im gonna assume you run a small battery. Can your AK run a stick battery? Or can you get a battery box/bag and keep it attached to the stock? If you can then you can get a large battery that will have much higher mAh rating (which is what makes your battery last longer. more mAh, more shots) or if your set up for/willing to upgrade your box, go lipo.
|
|
February 7th, 2010, 14:53 | #5 |
Yea, I figured I needed to switch to a large battery, and no the wiring is for the stock.
But there's batteries like : http://shop.ehobbyasia.com/bb-batter...k47-stock.html http://shop.ehobbyasia.com/bb-batter...k47-b-sc3.html For the Ak47 type stock, I guess they would do the job, also, Would I need to change the fuse on my wiring? But would those be enough to power the EG1000 + Sp120 spring setup? As for lipoly, I don't know if it would run with my current set up. |
|
February 7th, 2010, 15:14 | #6 |
Yeah a 9.6 should pull a 120 spring. Just make sure you have a proper charger or it will fry your batt and you will lose the power to power it.
What kinda gun are you running right now? |
|
February 7th, 2010, 15:19 | #7 |
A freshly upgraded Cyma cm028 with:
Guarder 6.02mm TB barrel Madbull Shark Accellerator Hop up + Fishbone spacer TM eg1000 motor Guarder sp120 spring (FTK-27) Pretty much what I'm running atm. Edit: Also, when I tried to shoot a cola can, it didn't alway go through it, but the battery seemed to be low in power, with the spring it's supposed to have 380-410fps if I remember well. (Guarder suggests customer to use 9.6V 1700mAh or higher battery for best result.) Last edited by WolvesSoulZ; February 7th, 2010 at 15:28.. |
|
February 7th, 2010, 15:42 | #8 |
Your batteries power does not result in drop/increase of FPS. All your battery does is spin the motor which turns the gears which draws back the piston and compresses your spring. As long as theres the power there it will shoot at the same FPS. Your rate of fire will decrease with lower power though. Deviations in FPS are a result of compression problems, imperfect BBs, and dirty barrels.
|
|
|
Bookmarks |
|
|