Question about KWA Mac 11

heyds · March 15th, 2010, 13:24

When I pull the bolt back the blowback tube/barrel that is supposed to pull back does not always go back all the way. It does not cause any trouble when I insert the mag but I was just curious if this was a lubing problem or how I might be able to fix it.
Regards,
Heyds

NoGear · March 16th, 2010, 01:28

lube it and it may possibly be due to the hopup, i don't know because i own a tf11, and when that happens i just lube it and it works fine. IT worked fine without lubing but you never know.

Rugger_can · March 16th, 2010, 01:38

It sounds like you may be using insufficient lubrication. The M11 can be a monster and definitely requires rigorous maintenance.

heyds · March 16th, 2010, 16:13

Thanks for your help guys, and yes it was lubing. Even after like 5 - 7 clips though I had to do it again. And another issue is the magazine. My bbs kept jamming (probably because there biodegradable) but I tried lubing where the bbs slide up and now the bbs are getting dirty in the magazine from some reason. I tried my best cleaning it out a bit, but I was just wondering is it ok I lubes the mag?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 15th, 2010, 13:24	#1
heyds Trader rating Join Date: Jan 2010 Location: Ontario	Question about KWA Mac 11 When I pull the bolt back the blowback tube/barrel that is supposed to pull back does not always go back all the way. It does not cause any trouble when I insert the mag but I was just curious if this was a lubing problem or how I might be able to fix it. Regards, Heyds __________________ --------------------------------------------------- "I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones." - Albert Einstein ---------------------------------------------------

March 16th, 2010, 16:13	#4
heyds Trader rating Join Date: Jan 2010 Location: Ontario	Thanks for your help guys, and yes it was lubing. Even after like 5 - 7 clips though I had to do it again. And another issue is the magazine. My bbs kept jamming (probably because there biodegradable) but I tried lubing where the bbs slide up and now the bbs are getting dirty in the magazine from some reason. I tried my best cleaning it out a bit, but I was just wondering is it ok I lubes the mag? __________________ --------------------------------------------------- "I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones." - Albert Einstein ---------------------------------------------------

March 16th, 2010, 01:28	#2
NoGear likes being humiliated Trader rating Join Date: Jun 2008 Location: Surrey BC	lube it and it may possibly be due to the hopup, i don't know because i own a tf11, and when that happens i just lube it and it works fine. IT worked fine without lubing but you never know.

March 16th, 2010, 01:38	#3
Rugger_can Trader rating Join Date: Dec 2001 Location: Downtown Ottawa	It sounds like you may be using insufficient lubrication. The M11 can be a monster and definitely requires rigorous maintenance.

Question about KWA Mac 11

Newbie Tank