HELP! Type 96 piston question.

[Nardclupe]

I need to know if this is a 7mm diamtre piston or a 9mm.

http://www.airsoftparts.ca/store2/in...oducts_id=1096

Please help, i need to get my l96 up and running soon and i want this part, the stock piston is 7mm and my spring is 9mm.

[Kos-Mos]

9mm. 99% of all aftermarket pistons are 9mm. (I used this one, my favorite along with a LayLax soft head (or Modify head). Don't forget you need to buy a head separately too, it does not come with one. Any APS-2 or Type 96 head for 3-piece pistons work). http://www.airsoftparts.ca/store2/in...oducts_id=1814
You can use a 7mm spring in a 9mm piston.

It's usually the upgraded spring guide that is either 7 or 9, and you need to pick the right one according to you spring.

LayLax one comes with both. No bearing, but there is no reason to have one in a bolt-action, the piston is not in guide rails like AEGs and can rotate at will.

[GR]

EDIT: Kos-Mos mentioned everything. My advice would be to contact the owner and confirm, just to be sure.

[Nardclupe]

Ok thanks, so i can buy this piston now because i got a 9mm spring by accident lol. Thanks guys!