SRC M4 vs Tokyo Marui M4

[DarkAngel]

Im wondering what the difference is between TM's and SCR's M4 are, i hear the parts are interchangeable. A Few Questions.

1) Can You take apart the src m4 the same way as the TM?
2) If i get the m4 metal body, do i have to get TM's Parts?
3) There Appears to be no spring on the cocking lever, but ive seen other TM M4s that have the leaver spring back, can i put a spring into mine?
4) How do i Dissassemble the SRC RIS?
5) Side Sling Mount, better than lower mount? or not?

Any Answers to these questions would be much appreciated

cheers,
DarkAngel

[Bender]

1) The SRC dissassembles the same way as the TM
2) TM parts are better than SRC, but the metal body isn't too bad. Most metal bodies are a lot better than the SRC ones.

[DarkAngel]

so do i have to get tokyo marui parts like the cocking lever if i get the metal body?

[yanhchan]

One question while he's at it. Does SRC have barrel wobble?

[Bender]

Originally Posted by DarkAngel

so do i have to get tokyo marui parts like the cocking lever if i get the metal body?

You don't have to. SRC makes these parts as well as a bagillion other companies. What exactly are you trying to do? Put an SRC metal body on TM internals? Or something else?

[Bender]

Originally Posted by yanhchan

One question while he's at it. Does SRC have barrel wobble?

Yeah, but it's not too bad on my M4. From what I've seen of the M16s it is there but not too bad either. The reason SRC is so cheap is that it is made with less than desireable metal.

[Jar|-|ead]

yeah but try to put the tm mechbox into your SRC body...pistol grip and mechbox pin WILL NOT ALLIGN...had a few problems with ti..and SRC has barrel wobble..but i found a way to fix it with out rail-covers..

[Bender]

I know of someone who put a Systema complete mechbox in an SRC M16 and it fit properly.

[Jar|-|ead]

plastic or metal body SRC M16?...cuz i had problems with a plastic SRC m4 lower reciever

1) Can You take apart the src m4 the same way as the TM?
Yes,same way

2) If i get the m4 metal body, do i have to get TM's Parts?
You might as well get full assemble TM or better mechbox to fit into the metal body.SRC crack LIKE CRAZY.

3) There Appears to be no spring on the cocking lever, but ive seen other TM M4s that have the leaver spring back, can i put a spring into mine?
Do you mean the charging handle?THEY SHOULD have one.

4) How do i Dissassemble the SRC RIS?
I can show you in-person.

5) Side Sling Mount, better than lower mount? or not?
It doesn't matter.I took me sling out.

[DarkAngel]

Thanx Jar]-[ead, Preston
Jar]-[ead,Ill show it to you in person.

btw, pm me where u live in markham

cheers,
DarkAngel

[Bender]

Originally Posted by Jar|-|ead

plastic or metal body SRC M16?...cuz i had problems with a plastic SRC m4 lower reciever

It was a metal body reciever.