|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 7th, 2006, 19:54
|
#1 |
|
TM m4, how to remove mechbox.
quick question for m4a1 by TM, how do i remove the mechbox, i need to move the wire from the back the recivers to the front like a standard m4a1, its set up like a SR 16 right now.
|
|
|
|
August 7th, 2006, 20:26
|
#2 |
|
Ban-Fu Sifu
|
1-pull the stock release pin all the way to the bottom, pull stock off
2-unscrew the tail cap 3-remove buffer tube via the phillips screw in the buffer tube 4-unscrew the mototr plate ( under the grip) 5-remove motor, don't lose the little round plate. 6-remove front grips 7-unclip the two wires off the fuse plate 8 unpin the receiver 9-remove upper from lower 10-unscrew the pistol grip 11-unscrew the mag release 12-unscrew the feed tube 13-unscrew the little wire holder in front of the feed tube 14-remove cross pin 15-wiggle the mechbox out of the lower, a little prying force will be needed that should be it
__________________
Vondnik, team Bad Karma, PQAC Murphy's second rule: Nothing is impossible for the man who does not have to do it himself. 
|
|
|
|
|
August 7th, 2006, 20:51
|
#3 |
|
|
thnx vondnik :cheers:
|
|
|
|
|
August 7th, 2006, 21:15
|
#4 |
|
Lego Head
|
Hammer.... j/k
__________________
_________________________________ "The hydrogen economy car from the people who brought you the 'Hindenburg'" - Glen Foster Condoms do not guarantee safe sex any more. A friend of mine wore one and was shot by the woman's husband! 
|
|
|
|
|
August 19th, 2006, 16:59
|
#5 |
|
|
im finding this alot harder than i thought.
|
|
|
|
|
August 19th, 2006, 17:12
|
#6 |
|
Official ASC Bladesmith
|
Welcome to the club. Ain't easy at first until you get it, then it'll stick with you. What parts of Vondnik's list did you miss?
|
|
|
|
|
August 19th, 2006, 17:42
|
#7 |
|
|
well i unscrewed the bottom of the grip, then i saw two wires clipped to this thing, and this little metal round bit fell out, put it aside, then i was lost. : )
|
|
|
|
|
August 19th, 2006, 17:55
|
#8 |
|
This may help you.
http://www.uncompany.com/information...eassemble1.asp Nitro "type" rail. http://www.airsoftcanada.com/showthr...688#post387688
__________________
Team Bad Karma(BK-09) CAUTION: Evil Genius at Work Those that wear the "Tin Foil Hat" stand on guard for thee. All others stand on guard for themselves. 
|
|
|
|
|
August 19th, 2006, 21:30
|
#9 | |
|
Captain Awesome
|
gawd i hate working on armalites
__________________
Age verifier southern Alberta  Quote:
|
|
|
|
|
|
August 20th, 2006, 04:34
|
#10 |
|
Banned
|
pull the wires off, remove motor, take 2 screw out of the grip there.
To wire it to the front, your gonna need to take the mechbox apart too and rewire it so the wires come out the front, you cant just put them from the back to the front, gonna need to rewire it. |
|
|
|
|
August 20th, 2006, 13:56
|
#11 | |
|
Quote:
Just be warned that opening the mechbox is one thing, putting it back together is entirely another. You may wish to seek the services of a trained gunsmith to help you, and ask him if its ok to watch him work, its really helps to see someone proficient go through it once. That piece that fell out is the motor plate that fits in the bottom of the hand guard cap. It allows the grub screw on the bottom of the cap to push the motor into alignment with the gears just right. You need this piece, or a similar replacement or you will ruin the teeth on your motor gear, if it even fires at all. Vondnik did warn of this in his list ;0) Sometimes when I lose small pieces, I sweep (or vacuum if you must) and go through the dust pan until I find it.
__________________
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
