Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

CAN Stock CA M15 handle a?

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old December 28th, 2006, 05:16   #1
KraziAzn
 
KraziAzn's Avatar
 
Join Date: May 2006
Location: USA
CAN Stock CA M15 handle a?

Stright out of the box...can a CA handle 9.6 3300mah? without blowing the fuse?
__________________
KraziAzn is offline   Reply With Quote
Old December 28th, 2006, 07:19   #2
Greylocks
 
Greylocks's Avatar
 
Join Date: Dec 2001
Location: Gatineau, Quebec (Near Ottawa)
Check your manual. If your gun, from any manufacturer, is designed by the engineers to use 8.4 volts, then your choice is obvious.

If you add more voltage, you then choose to add more wear and tear to the internal parts.
Greylocks is offline   Reply With Quote
Old December 28th, 2006, 10:25   #3
Gryphon
 
Join Date: Mar 2005
Location: MB
It can handle it but like Greylocks says, you'll be wearing things down fast and you chance stripping the piston. I had to replace a CA249 piston after someone used a 9.6V 4200 mAh on it and it stripped. I've seen CA M15A2s handle a 9.6V 1200 mAh but with the higher discharge capacity of a 3300 mAh Sub C cell you'll get an even faster rate of fire. An 8.4V should be more than enough. FWIW, I run mine on a 7.2V and get close to 900 RPM.

You won't blow the fuse with a higher voltage battery because the fuses are rated for 12 volts. It's the amp draw that kills fuses and the higher your voltage, the more efficient your motor will be and the LESS amperage you will draw.
Gryphon is offline   Reply With Quote
Old December 28th, 2006, 13:32   #4
k2x5
 
k2x5's Avatar
 
Join Date: Sep 2005
Location: Barrie, Ont.
Send a message via ICQ to k2x5 Send a message via MSN to k2x5
Not that I'm saying to try it or anything...

But the manual for my CA M15A4 says to put a 12V battery in it... And then it mentions that 10.8, 9.6, 8.4 and 7.2 can be used also...
__________________
Quote:
Originally Posted by Skruface View Post
I recommend you wait until you're 18+, have a decent education, a good job, a home that isn't your parent's basement, a car, and enough expendable cash that you don't have to ask my advice on buying junk - by then you'll be old enough, wise enough (hopefully) and have enough cash to buy whatever you want regardless of the multitude of conflicting opinions you're going to get.
-------------------------------------------------
I'm Going To Live Forever... Or Die Trying!
-------------------------------------------------
Guns:
- TM Sig P226
- TM M4A1 w/ G&P Metal body
- TM G36c
k2x5 is offline   Reply With Quote
Old December 28th, 2006, 14:12   #5
Gryphon
 
Join Date: Mar 2005
Location: MB
I know, that baffles me. I can't imagine what kind of piston-stripping minigun wannabe a gun would become with a stock spring and a 12V battery. You're better off dumping bags of BBs in front of an air compressor at that point.
Gryphon is offline   Reply With Quote
Old December 28th, 2006, 15:03   #6
Greylocks
 
Greylocks's Avatar
 
Join Date: Dec 2001
Location: Gatineau, Quebec (Near Ottawa)
I think the problem here, like most times, is people who are totally unfamiliar with airsoft who start to imagine solutions to problems that dont exist.

For a LOT of guns, more is not better. Sometimes it's far worse.
Greylocks is offline   Reply With Quote
Old December 28th, 2006, 15:23   #7
manchovie
 
manchovie's Avatar
 
Join Date: Dec 2003
Location: Toronto
Send a message via ICQ to manchovie Send a message via AIM to manchovie Send a message via MSN to manchovie
every piston has its life span. putting a larger battery wont change the life span, but you may approach the limit quicker just from cycling the gun more. i say go for it, i love high amperage 9.6's they breathe new life into your gun.
__________________
experienced toronto gun doctor, hundreds of guns serviced
manchovie gun doc thread!

my b/s rating
manchovie is offline   Reply With Quote
Old December 28th, 2006, 19:50   #8
k2x5
 
k2x5's Avatar
 
Join Date: Sep 2005
Location: Barrie, Ont.
Send a message via ICQ to k2x5 Send a message via MSN to k2x5
Quote:
Originally Posted by manchovie View Post
...i say go for it, i love high amperage 9.6's they breathe new life into your gun.
lol. and they bring in more business?
__________________
Quote:
Originally Posted by Skruface View Post
I recommend you wait until you're 18+, have a decent education, a good job, a home that isn't your parent's basement, a car, and enough expendable cash that you don't have to ask my advice on buying junk - by then you'll be old enough, wise enough (hopefully) and have enough cash to buy whatever you want regardless of the multitude of conflicting opinions you're going to get.
-------------------------------------------------
I'm Going To Live Forever... Or Die Trying!
-------------------------------------------------
Guns:
- TM Sig P226
- TM M4A1 w/ G&P Metal body
- TM G36c
k2x5 is offline   Reply With Quote
Old December 28th, 2006, 20:05   #9
Gryphon
 
Join Date: Mar 2005
Location: MB
Quote:
Originally Posted by manchovie View Post
every piston has its life span. putting a larger battery wont change the life span, but you may approach the limit quicker just from cycling the gun more.
Uh, no. If your spring is too light to fully return the piston to battery before the sector gear begins making its next revolution, the teeth of the sector gear will not only be engaging the piston teeth somewhere at its midpoint it will be fighting the return force of the spring. The result is a stripped piston. Ask PoFF about that one.
Gryphon is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 10:07.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.