|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 16th, 2007, 15:12
|
#1 |
|
I got my new hopup today..
It came with a spring.. and i was wondering where the spring fit in?
|
|
|
|
July 16th, 2007, 15:17
|
#2 |
|
kos
|
between the outer barrel, and the unit.
|
|
|
|
|
July 16th, 2007, 15:25
|
#3 |
|
Scotty aka harleyb
|
Or inside to push up on the hop lever.
__________________
|
|
|
|
|
July 16th, 2007, 15:50
|
#4 |
|
If the spring is thin wire, tightly coiled, and fits around the barrel, it takes the place of a brass spacer at the front of the hop unit. It goes into the body of the hop, between it and the barrel, centering the barrel in the hopup unit.
I have several new hop buckings, some come with a brass sleeve, some have the wire coil, some have nothing. Your gun will tell you what it wants when you dissassemble it. A little talcum powder works WAYYY better than silicone oil for installing these easy to tear buggers. I used baby powder in a pinch once, and was amazed at how much better the sucess rate was, I was buying two buckings at a time in hopes of getting ONE in properly. And don't put WEEDEE40 on it! it will be toast, swelling up and turning to mushy goop. |
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
