HFC M190 Slide Lock Problem

Boarder · August 29th, 2007, 02:58

ya im pretty should its going back all the way... im using propane

Styrak · August 29th, 2007, 03:02

Hm. If you insert an empty magazine, then rack the slide back, does it lock?

Boarder · August 29th, 2007, 03:03

yep

tony123 · August 29th, 2007, 03:08

did you put in a stronger recoil spring and right after this started hapening? Also if you look at the mag you will see what pushes the slide catch back. Pull your slide off load in a mag and see if that little part is making contact with the catch. If no parts touch you probly need a new slide lock.

Boarder · August 29th, 2007, 03:11

It has the same recoil spring it came with and when i take off the slide and load the mag in it makes contact and pushes the slide lock up

tony123 · August 29th, 2007, 03:15

Im no expert but the only problem i could see is what was sugested before. The slide is blowing back far enough. So I guess you have to start looking at the blowback mechinism. Im definatly not much help....

Boarder · August 29th, 2007, 03:16

So what could be stopping the slide from not blowing back all the way?

Styrak · August 29th, 2007, 03:17

Where are ya? Fill in some more profile information.

Boarder · August 29th, 2007, 03:20

im in alberta

Boarder · August 29th, 2007, 03:23

So does any one kno what could be stopping the slide from not sliding all the way back?

Styrak · August 29th, 2007, 03:27

Not enough gas on each shot, or too strong a recoil spring. But if it's stock then the recoil spring should be fine. And we've already determined that it locks back when you rack the slide. So it must not be going all the way back due to not enough gas being expelled on each shot. That's my guess. Is this a new gun? Used gun?

Boarder · August 29th, 2007, 03:29

i got this gun probably about 4 months ago and it was brand new

Boarder · August 29th, 2007, 03:36

could this be because of my mag?

Styrak · August 29th, 2007, 03:37

Could be the valve, could be the gas hammer, or the hammer spring.

Boarder · August 29th, 2007, 03:40

so do u think i should get a new mag?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 29th, 2007, 03:02	#17
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Hm. If you insert an empty magazine, then rack the slide back, does it lock? __________________ Airsoft Sales and Repair/Upgrade Services

August 29th, 2007, 03:11	#20
Boarder Trader rating Join Date: Mar 2007 Location: Aberta	It has the same recoil spring it came with and when i take off the slide and load the mag in it makes contact and pushes the slide lock up Last edited by Boarder; August 29th, 2007 at 03:14..

August 29th, 2007, 03:17	#23
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Where are ya? Fill in some more profile information. __________________ Airsoft Sales and Repair/Upgrade Services

August 29th, 2007, 02:58	#16
Boarder Trader rating Join Date: Mar 2007 Location: Aberta	ya im pretty should its going back all the way... im using propane

August 29th, 2007, 03:03	#18
Boarder Trader rating Join Date: Mar 2007 Location: Aberta	yep

August 29th, 2007, 03:08	#19
tony123 Trader rating Join Date: Mar 2006 Location: Brandon MB	did you put in a stronger recoil spring and right after this started hapening? Also if you look at the mag you will see what pushes the slide catch back. Pull your slide off load in a mag and see if that little part is making contact with the catch. If no parts touch you probly need a new slide lock.

August 29th, 2007, 03:15	#21
tony123 Trader rating Join Date: Mar 2006 Location: Brandon MB	Im no expert but the only problem i could see is what was sugested before. The slide is blowing back far enough. So I guess you have to start looking at the blowback mechinism. Im definatly not much help....

August 29th, 2007, 03:16	#22
Boarder Trader rating Join Date: Mar 2007 Location: Aberta	So what could be stopping the slide from not blowing back all the way?

August 29th, 2007, 03:20	#24
Boarder Trader rating Join Date: Mar 2007 Location: Aberta	im in alberta

August 29th, 2007, 03:23	#25
Boarder Trader rating Join Date: Mar 2007 Location: Aberta	So does any one kno what could be stopping the slide from not sliding all the way back?

August 29th, 2007, 03:27	#26
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Not enough gas on each shot, or too strong a recoil spring. But if it's stock then the recoil spring should be fine. And we've already determined that it locks back when you rack the slide. So it must not be going all the way back due to not enough gas being expelled on each shot. That's my guess. Is this a new gun? Used gun? __________________ Airsoft Sales and Repair/Upgrade Services

August 29th, 2007, 03:29	#27
Boarder Trader rating Join Date: Mar 2007 Location: Aberta	i got this gun probably about 4 months ago and it was brand new

August 29th, 2007, 03:36	#28
Boarder Trader rating Join Date: Mar 2007 Location: Aberta	could this be because of my mag?

August 29th, 2007, 03:37	#29
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Could be the valve, could be the gas hammer, or the hammer spring. __________________ Airsoft Sales and Repair/Upgrade Services

August 29th, 2007, 03:40	#30
Boarder Trader rating Join Date: Mar 2007 Location: Aberta	so do u think i should get a new mag?

HFC M190 Slide Lock Problem

Doctor's Corner